Top Bearing Spacer Set Reviews

Teak Tuning Fingerboard Spacer Trucks with Standard Tuning, White - 32mm Width - Tuned & Assembled

  • SPACER TRUCKS || Set of two, 32mm basic fingerboard spacer trucks that provide quality performance and simplicity all in one. Fits decks measuring between 29 - 35mm wide.
  • TUNED & ASSEMBLED || Trucks are both assembled and tuned, ready to be attached to your fingerboard. All necessary hardware is included - 6 nuts, 8 black screws, 4 spacers, and 1 tool.
  • SMOOTH FINISH || Trucks are painted white and have a smooth, glossy finish. Paint will wear down over time, just like regular skateboard trucks.
  • COMPATIBILITY || Teak Tuning spacer trucks are compatible with all types of single and dual bearing fingerboard wheels.
  • FOR RIDERS OF ALL SKILL LEVELS || Perfect for riders of all skill levels. Includes a free Teak Tuning sticker. Choking Hazard: Small Parts. Not suitable for children under the age of 14.
Check Stock

OCTOPUS W10435302 & W10447783 Bearings Tool Kit Compatible Washing Machine Includes grabber fix all Adhesive Washer Shaft Replace Washer Bearing Replacement Dryer Bearing Kit Dryer Shaft

  • INCLUDES: 1 - Bearings Kit / 1 – Bearing Seal / 1 – Drive Shaft / 1 –Nut & Spacer / 1 – Bearing Spacer Tube / 1 – Instructional Manual / 1....
  • SPECIFICATIONS: Bearing Type(s): Type 1& Type 2 / NBR Double Shield Metal Spacer and Metal Shaft. Our metal construction tool repair kit is meant to....
  • PERFECT FIT: Please Reference Our Compatibility List Below to Ensure Our Parts are Compatible with Your Component(s). Please contact us if you have....
  • WARRANTY & CARE: Reliable Customer Service Is Our #1 Priority. Here at Octopus, We Readily Offer a 30-Day Money Back Guaranteed and 90-Day Limited....
Check Stock

Teak Tuning Fingerboard Spacer Trucks with Standard Tuning, Side Show - Gold and Silver - 32mm Width - Tuned & Assembled

  • SPACER TRUCKS || Set of two, 32mm basic fingerboard spacer trucks that provide quality performance and simplicity all in one. Fits decks measuring between 29 - 35mm wide.
  • TUNED & ASSEMBLED || Trucks are both assembled and tuned, ready to be attached to your fingerboard. All necessary hardware is included - 6 nuts, 8 black screws, 4 spacers, and 1 tool.
  • SMOOTH FINISH || Trucks are painted silver and gold and have a smooth, glossy finish. Paint will wear down over time, just like regular skateboard trucks.
  • COMPATIBILITY || Teak Tuning spacer trucks are compatible with all types of single and dual bearing fingerboard wheels.
  • FOR RIDERS OF ALL SKILL LEVELS || Perfect for riders of all skill levels. Includes a free Teak Tuning sticker. Choking Hazard: Small Parts. Not suitable for children under the age of 14.
Check Stock

W10435302 for Whirlpool Bearing Kit Cabrio Washer Parts Tub Shaft Bearing AP5325033, 2118925, PS3503261

  • ✅ 【MODEL NUMBER】: Tub seal and bearing kit replaces for Whirlpool w10435302 ,2118925, AH3503261, AP5325033, B00DM8L8DK, EA3503261, EAP3503261, LY-KLH3-ZJ45, PS3503261. The bearing kit is not created or sold by Whirlpool..
  • ✅ 【COMPATIBLE BRAND】:w10435302 Bearing kit compatible with Whirlpool,Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and others..
  • ✅ 【PACKAGE INCLUDE】:This washer tub shaft bearing kit include 9 pcs in total:2 Bearings, Seal,Drive Shaft, Shaft Nut, Spacer, Spacer tube ,Adhesive and lubricants.This part fixes the symptoms: Noisy and Leaking..
  • ✅ 【PREMIUM QUALITY】: This replacement bearing kit is made of high quality steel, it’s very sturdy and has been well-tested by the manufacturer..
  • ✅ 【MONEY-BACK GUARANTEE】: for any reason you’re not completely satisfied,can ask for a replacement or full refund..
Check Stock

Spitfire Classic Skateboard Bearings One Size Blue

  • BUILT IN FOR EASY INSTALLATION - Fireball Dragon Built In Bearings are designed for quick and simple installation on your skateboard or longboard, with reduced slop (bearing movement) and perfect alignment, eliminating the need for separate spacers and skateboard washers.
  • INCREASE YOUR PERFORMANCE - Dragon Bearings come with our signature Labyrinth Shield to keep dirt and debris out while offering maximum lubricant retention! See image for more info.
  • PRE-LUBRICATED FOR LONGEVITY - with our Dragon ENDURE grease for maximum longevity and all weather use. These bearings are built to perform day in, day out.
  • LIFETIME BEAST GUARANTEE - for peace of mind against manufacturing defects for the life of your bearing.
  • SET OF 8 608 BEARINGS - 1 Set is enough for 4 skateboard or longboard wheels. Specs - 22mm (outer diameter) x 7mm (width) x 8mm (inner diameter/axle) with built-in spacer measurements of 5.1mm and a 0.65mm speed ring..
Check Stock

FIGURESLAB 16Pcs Mix Colorway Fingerboard Tucks with Nuts–34mm Wide & 48Pcs Mix Wheel& 32PCS Nuts &64Pcs Screws & 2PCS Spanner Tool

  • WIDTH ：Each fingerboard truck is 34mm wide and is compatible with most single bearing wheels.
  • As picture shown,All necessary hardware is include 16Pcs Fingerboard Tucks & 48Pcs Mix Wheel& 32PCS Nuts &64Pcs Screws & 2PCS Spanner Tool.
  • 34mm Widen fingerboard spacer trucks that provide quality performance and simplicity all in one. Fits decks measuring between 29 – 35mm wide,Each wheel contains a single metal bearing that enables the wheel to spin fast and ride smooth.
  • spacer trucks are compatible with all types of single and dual bearing fingerboard wheels.
  • Note：Not suitable for children 14 and under.
Check Stock

56 Pieces Skateboard Truck Hardware Kit Includes 8 Pieces Spacers, 8 Pieces Axle Nuts and 40 Pieces Speed Rings for Skateboard and Longboard

  • Package quantity: package comes with 8 pieces skateboard spacers, 8 pieces axle nuts and 40 pieces speed rings, enough quantity to fit on a skateboard or longboard and improve bearing performance.
  • Speed spacer: our skateboard spacer allows you to rotate the axle nut downward all the time, thus reducing slop and increasing bearing life, durability and performance.
  • The +/ -0.02 mm precision tolerance ensures nicely fit and very fast bearing at a time.
  • Speed rings: our speed rings can increase speed and extend longer bearing life by reducing friction among the bearing, axle nut and hangar.
  • Axle nuts: our axle nuts will prevent your wheels from falling off, the more you change your wheels and bearings, the more the axle nuts wear out and lose its tightness.
  • These standard size axle nuts will keep you locked up and will fit most skateboard/ longboard trucks with 8 mm axles (in fact, each truck has a standard 8mm axle size).
  • These axle nuts have thread dimensions of 5/16 inch.
  • Wide application: this skateboard tool kit can be applied for most skateboard/ longboard trucks, they are strong and with proper installation, are resistant to stripping.
Check Stock

Lisle 53790 Harmonic Balance Installer Kit, 13 Adapters

  • Set includes driving screw, thrust bearing, and 13 threaded adapters necessary to work on a wide range of domestic and some import harmonic balancers.
  • Five long adapters for use on Dodge Hemi, generation III and IV GM motors, some Chrysler and some Ford including 3. 5L and 4. 0L.
  • The 1. 75" spacer allows the tool to work more efficiently on deep harmonic balancers.
Check Stock

TOBWOLF 8 Pack 70mm 82A Indoor Inline Skate Replacement Wheels, Indoor Skating Wheels with ABEC-7 Bearings, Luggage Wheels, Training Wheels for Scooter - Black

  • ✔️【SIZE & DIAMETER & NOTE】 -- 70mm wheel diameter, 24mm wheel thickness, 82A hardness.
  • bearing inner diameter 8mm, white plastic spacer inner diameter 6mm. NOTE: the white plastic spacer is suitable for 6mm axle, but if you pull it out, the wheel would be suitable for 8mm axle. Please check the specifications in the second product image to ensure it match your skates, and the package doesn't include any axles or screws..
  • ✔️【LIGHT DUTY WHEELS】-- These wheels are mainly used for luggage, training wheels or indoor skating. Not recommended to use on uneven ground..
  • ✔️【STURDY MATERIAL】 -- These roller skate wheels adopted superior PU, wear-resistant & solid. Designed with 82A hardness, offers durable use experience. Its high performance bearings ensure a smooth and comfortable ride. If the inner buckle of the wheel core is loose, it is recommened you could add a little bit of paper between the white plastic lip and the bearing to better fix the wheel..
  • ✔️【PRACTICAL & HANDY】-- High-tech elastic material makes it movements easy. Perfectly suitable for indoor daily practice, recreational skating, extremely handy and practical, making you enjoy the skating time..
  • ✔️【VALUE SET】-- Pack of 8pcs skating wheels, just in line wit....
Check Stock

CyclingDeal WTB SX19 Mountain Bike Bicycle Novatec Hubs & Tires Wheelset 11s 26" QR

  • Hand-Built: Those wheels are built by hand and the spokes are fully extended by pushing machine. So the spokes will not be extended anymore after a few rides. This step is very important to make sure the wheels are always true..
  • Hubs: Novatec Front Hub D481SBT weight 287g, Rear Hub D482TSBT weight 476g, 2 Sealed bearing, Quick Release, Gauge 14, O.L.D. Front-100mm Rear-135mm, Axle material S45C, 8 9 10 11 Speed compatible.
  • IMPORTANT: a cassette spacer is required if it’s a 8 or 9 speed cassette. (Spacer NOT INCLUDED).
  • Rim: WTB SX19 Disc Brake Rim 26",Spokes: 32, Material: Stainless Steel. | Tire: Continental X-King MTB Folding Tire 26" x 2.2， Weight: 6050g/set=13.33lbs.
  • ORDER NOW, WORRY FREE! We're so confident about our product quality that we can provide a 1 year warranty !.
Check Stock

SONIC Pro Inline Skate Tool - Orange

  • ESSENTIAL: A must-have for changing wheels, removing bearings and more.
  • 9 TOOLS: 4 mm Hex, T25 Torx, 2 Bearing Pushers, Bearing Extractor, Bearing Press, 2 Floating Spacer Aligners, Phillips #2.
  • ERGONOMIC: Comfortable handle for grip and leverage.
  • DURABLE: Made with high strength S2 tool steel.
  • AUTHENTIC: Inline skater designed in Los Angeles and quality made in Taiwan.
Check Stock

Muzata PA25 Side Mount Fastening Kit 1/8\ Stainless Steel Weldless for 42\ Cable Railing Side Mount Post PF01 PF02 Tread Reinforced Board Wood Concrete Deck Stairs 2Pack

  • Side-mounted Installation - This reinforced board is used to strengthen the board of the landing or staircases where the 42’’ side-mounted post can be installed against it. With this 1/8" side mount fastening kit, you can clamp the board tightly with fastening bolts, widening the bearing area and reinforcing the installation of the 42’’ side-mounted post. Once properly installed, it can provide more security and stability.
  • Custom design - This side mount fastening kit is custom-designed for MUZATA side-mounted posts PF01 and PF02. It can also be used as side mount spacer. To install 36" posts, pls search PA13 for 1" side mount spacer, PA14 for 2" side mount spacer, PA22 for 1/8" side mount fastening kit. To install 42" posts, pls search PA23 for 1" side mount spacer, PA24 for 2" side mount spacer, PA25 for 1/8" side mount fastening kit.
  • Weather protection - This side mount fastening kit is made of quality T304 stainless steel with great rust resistance and will work for a long lifetime. It is ideal for both indoor and outdoor applications like deck, stair, porch, balcony, and fence.
  • SpaceSaver system - Except for the side mount fastening kit, a complete cable railing system can include posts (PF01 PF02), handrails (Muzata HT10 for flat, HT2....
Check Stock

TACTICAL GEARZ Stainless Steel EDC Pocket Knife TG Triton S! Stonewashed Stainless Steel Handle! Razor Sharp D2 Steel Blade! Ball Bearing Pivot System! Includes Sheath! Triton S

  • Premium Stainless Steel Handle EDC Pocket Knife, Razor Sharp D2 Steel Blade, Ball Bearing Pivot System!.
  • Features Include: Stonewashed SS Handle! Belt Clip, Metallica Blue Back-spacer, Ball Bearing Pivot System, Frame Lock. Includes Gift Box Nylon Storage Sheath!.
  • Handle Construction: Stonewashed Stainless Steel Handle Construction! Metallic Blue Aluminum Back-Spacer and pivot bolt. 420 SS Screws and belt clip..
  • Blade: Razor Sharp D2 Steel Blade. Hardness: 59-60HRC, Heat Treatment: Vacuum, Blade thickness: 4.1mm (.16").
  • Blade Length: 3.5", Handle Length: 5", Overall Length: 8.5", Weight: 5.50oz. Includes Gift Box and Nylon Storage Sheath!.
Check Stock