Top Bearing Removal Reviews

27213 Master Wheel Hub and Bearing Remover and Installer Tool Kit, Back and Front Wheel Bearing Puller Kit, Back and Front Wheel Hub Puller

  • 【WIDE COMPATINILITY 】-- Universal, provides various size of adapters makes installing wheel hubs and bearings on most domestics and foreign cars-rear, front, and four-wheel drive much easier. Compatible with BMW/Benz/Porsche/VW and most domestic/Asian/European vehicles. Works on Front, Rear and All-Wheel Drive Vehicles..
  • 【UPGRADE DESIGN】-- Designed with slide-hammer-free removal, make the job much simple that can easily install the hub and bearing changes on most cars. Under without the use of a hammer or a shop press, only use this tool be able to easily remove and install wheel hub and bearing assemblies as well as inner bearings. Whether it is a professional or DIY mechanic, can be easily, accurately and safely completed the disassembly and installation of the wheel hub and bearing on the vehicle..
  • 【SUPERIOR MATERIAL】-- Made of solid carbon steel with resisting impact and no deformation, surface black anodized anti-rust finish to anti-rust and anti-corrosion for years of trouble-free use. Mold-blown plastic case is convenience to carry and storage. Alternative to OEM 27213, quality and function meet to OEM. High precision and hardness, designed with o....
Check Stock

VCT Rear Axle Bearing Remover Puller Slide Hammer Set Remove Semi-Floating

  • EASY TO USE: Slide flat end of puller through center of bearing and flat against backside of bearing, then slide washer down the center of the shaft against front side of bearing and tighten the nut on smaller end of puller, then thread a slide hammer (not included) to the puller and slide hammer back and forth until the bearing comes out.
  • The washer captures the bearing firmly to distribute the applied force over the entire bearing and prevent damage.
  • Use the VCT Pneumatic SAE Standard Rear Axle Bearing Puller 3-Piece Service Set – Domestic Car Vehicle Bearings Removal Tool Kit to service semi-floating rear axle bearings on your vehicle.
  • These tools make the job simple and prevent damage to your bearings when pulling.
  • Much easier than claw-type axle bearing pullers that slip off and chew up the old bearings.
  • For removal only, not intended for installation.
  • FITS YOUR CAR: Standard SAE sizes work for most American domestic makes and models.
  • Set includes the following sizes to fit main bearing tube – 1 inch to 1-7/8 inches, 1-5/16 inches to 2-3/8 inches, and 1-3/8 inches to 2-7/8 inches.
  • Sizes permanently laser-etched on tool for easy identification.
  • Each tool fits a basic slide hammer with a 5/8-inch x 18 thread pitch.
Check Stock

BILITOOLS 15-Piece Bearing Puller Kit Ball Bearing Extractor Bearing Removal Tool Set

  • For the removal of bearings where normal pullers are unable to be used by locking into the bearing race itself..
  • For removing grooved ball bearings without having to dismantle the shaft..
  • Suitable for removal of a variety of blind bearings where traditional bearing and gear pullers will not reach..
  • Specification: Clamping width: 20 - 90 mm. Interchangeable heads: Ø 5.5 - 6 - 8 mm. Max. puller depth 200 mm. Suitable for use with ISO bearing sizes : 6004-6010 | 6201-6206 | 6300-6302..
  • Include: 1 x mechanical pressure spindle, 1 x cross-beam, 1 x center screw thread cap, 2 x side bolt with nut and washers, 2 x pulling bolt extension, 2 x extensions for pulling devices, 6 x adaptors.
Check Stock

Orion Motor Tech 3\ 4\ 6\ 3-Jaw Gear Puller Set for Removal of Bearings Pulleys Flywheels (GD)

  • Universal Removal Tool: This 3-jaw removal tool set works with your wrench, ratchet, or spanner as a gear puller, sprocket puller, bearing puller, pulley puller, flywheel puller and more, removing even rusted parts easily and—thanks to its even distribution of force—without damage..
  • Better Together: This professional or home tool kit includes three puller sizes to cover most applications: a 3 inch gear puller with a 2.3" reach and 3" max. spread.
  • a 4 inch gear puller with a 3" reach and 4" max. spread.
  • and a 6 inch gear puller with a 4.7" reach and 6" max. spread..
  • Versatile Reversible Design: Each of the three 3-jaw gear and bearing pullers can be reversed to pull parts from either the inside or outside as needed..
  • 45# Carbon Steel: All parts are made with premium heat-treated 45# carbon steel for maximum strength. The jaws are galvanized and the central screw coated with black oxide to provide superior corrosion resistance and long service life..
  • Satisfaction Guaranteed: Along with this gear and bearing removal tool kit's durable material and careful engineering, you can rest easy knowing that these gear pullers are backed by Orion Motor Tech's warranty and friendly customer service..
Check Stock

Thur amo 2 Jaw Bearing Puller, Adjustable Two Claw Pilot Remover Hand Repair Tool Carbon Steel Pump Pulley Remover Straight Type for Motorcycle Car Auto (3in - 38x65mm)

  • 【Adjustable Design】 The puller can be bilateral rotation, enable stretching size and working space. Two jaw with adjustable clamping depth, fit for different size gears and bearings.
  • 【Carbon Steel Material & Foring Process】 The bearing gear puller is made by carbon steel, and the tip of the mandrel undergoes a special heat treatment process to make it more solid and durable.
  • 【Reinforcement Equipment】 The bearing gear puller comes with hexagonal screw and thread, will not slip, used for tightening, high strength.
  • 【Professional Repair Tools】 This removal tool is particular for slide gears, pulley, and flywheel, making removal simple and without any damage. Give you positive pulling power to remove bearings groove pulleys on alternator and power steering pumps.
  • 【Wide Application】 Suitable for automotive flywheel, motorcycle wheel, bicycle wheel, car wheel, machine wheel, pump bearing, generator bearing, machine bearing and so on.
Check Stock

Thur amo 2 Jaw Bearing Puller, Adjustable Two Claw Pilot Remover Hand Repair Tool Carbon Steel Pump Pulley Remover Straight Type for Motorcycle Car Auto (2.5in - 35x45mm)

  • 【Adjustable Design】 The puller can be bilateral rotation, enable stretching size and working space. Two jaw with adjustable clamping depth, fit for different size gears and bearings.
  • 【Carbon Steel Material & Foring Process】 The bearing gear puller is made by carbon steel, and the tip of the mandrel undergoes a special heat treatment process to make it more solid and durable.
  • 【Reinforcement Equipment】 The bearing gear puller comes with hexagonal screw and thread, will not slip, used for tightening, high strength.
  • 【Professional Repair Tools】 This removal tool is particular for slide gears, pulley, and flywheel, making removal simple and without any damage. Give you positive pulling power to remove bearings groove pulleys on alternator and power steering pumps.
  • 【Wide Application】 Suitable for automotive flywheel, motorcycle wheel, bicycle wheel, car wheel, machine wheel, pump bearing, generator bearing, machine bearing and so on.
Check Stock

8MILELAKE Rear Axle Bearing Puller Extractor Installer Set Axle Bearing Removal Remover Tool Kit

  • [APPLICATION]: This rear axle bearing puller can help to pull out semi-floating rear axle bearings quickly and effectively..
  • [EASY TO USE]: The washer of the axle bearing puller can captures the bearing firmly to distribute the force to the whole bearing, can avoid damage of the bearings and case..
  • [DURABLE MATERIAL]: The rear axle bearing removal tool is constructed from heavy duty cast steel, which has good strength and durability, can provide long service life..
  • [SIZE]: The bearing puller remover set includes fittings for main bearing tube: Small: 1" to 1-7/8.
Check Stock

YoYoFactory Wedge Yo-Yo - Polycarbonate - Evan Nagao Signature (Rayon Vert Green)

  • ...ecommend dual functional entry-level yo-yos. It is an excellent beginner kids yoyo, good for beginners to practise basic yoyo string tricks 1A 3A 5A, just a gentle tug on the string, it will return your hand easily..
  • Dual Purpose Yoyo - Also an Unresponsive YoyoResponsive yo-yo K2 is attached 8 balls unresponsive KK bearing. Once you're ready for unresponsive yoyo mode, the process to change it is very quick! All you have to do is grab the included yoyo bearing removal tool, the longer axel , and the concave bearing. You will get a new Unresponsive Yoyo, no need to buy another yo yo, a good value for you..
  • Premium Quality Plastic Yo-Yo MAGICYOYO K2 PLUS CRYSTAL Yoyo is made of high quality PC and beautiful crystal color, MAGICYOYO K2 CRYSTAL yo-yo is wear-resisting, durable and sturdy.
  • so its not easy to be damaged. This high quality plastic yoyo is an ideal gift for kids, friends, beginners, adults, family, as Christmas, Birthday gift..
  • Package Included1 x MAGICYOYO K2 PLUS CRYSTAL (Responsive Yoyo), Bonus - 5 x Yo-yo Strings (random color), 1 x Yo Yo Bag, 1 x bearing removal tool, 1 x KK Bearing ( For Unresponsive Use). Included everything you need for starting!.
  • IMPORTANT1.If the yo-yo do not come back sensitively, it is advised to drop few lubricatin....
Check Stock

Orion Motor Tech 3\ 4\ 6\ 8\ 3-Jaw Gear Puller Set for Removal of Bearings Pulleys Flywheels

  • Universal Removal Tool: This 3-jaw removal tool set works with your wrench, ratchet, or spanner as a gear puller, sprocket puller, bearing puller, pulley puller, flywheel puller and more, removing even rusted parts easily and—thanks to its even distribution of force—without damage..
  • Better Together: This professional or home tool kit includes four puller sizes to cover most applications: a 3 inch gear puller with a 4.3" max. reach and 3" max. spread.
  • a 4 inch gear puller with a 5" max. reach and 4" max. spread.
  • a 6 inch gear puller with a 7.3" max. reach and 6" max. spread.
  • and an 8 inch gear puller with a 9.3" max. reach and 8" max. spread..
  • Versatile Design: Each of the three smaller 3-jaw gear and bearing pullers can be reversed to pull parts from the inside or outside.
  • the 8 in. puller can be used in 4 different positions to deal with both medium and large parts..
  • 45# Carbon Steel: All parts are made with premium heat-treated 45# carbon steel for maximum strength. The jaws are galvanized and the central screw coated with black oxide to provide superior corrosion resistance and long service life..
  • Satisfaction Guaranteed: Along with this gear and bearing removal tool kit's durable material and careful engineering, you can rest easy knowing that th....
Check Stock

Lidscura 8PCS Motorcycle Bearing Pullers 9-23mm Motorcycle Internal Bearing Removal Tool Kit Inner Bearing Extractor Kit

  • Widely Application: This Remover tool kit is ideal for internal bearing removal of automotive flywheel, motorcycle wheel, bicycle wheel, pump bearing generator bearing, machine bearing etc..
  • Meet Your Different Needs: Internal bearing Extractor tool set is equipped with 5 different sizes of open clips. The bearing can be disassembled from 0.35inch(9mm) to 0.91 inch(23mm) inside diameter..
  • Fine Workmanship: This motorcycle bearing pullers set is made of high-quality chrome vanadium steel, strong and durable for for a long service time..
  • Easy to Use: Connect this bearing puller kit with 1/2" 3/4" male thread water faucet, open clamps by turning handle clockwise to snug against the bearing for taking out the inner bearing..
  • Instructions for use: First the tool head into the inner ring of the bearing, and then screwed into the shaft, the tool head propped open hooked bearing inner ring, and then turn the shaft, you can pull out the bearing.
Check Stock

Powerbuilt Pilot Bearing Puller, Remove Bearings and Bushings, Foreign and Domestic Car Repair, Storage Case - 648619

  • Made to be the most reliable tools in the market today.
  • Tool set for removal of the pilot bearing and bushings from the flywheel during clutch replacement.
  • Heavy duty puller with 1 1/2-Inch fingers for an extra deep reach.
  • Kit 8 includes 1-Piece for removal of pilot bearing and bushings from the flywheel during clutch replacement.
Check Stock

PORTER-CABLE Door Hinge Template (59370)

  • Quick And Easy Set Up With Lock-In Pins To Ensure Security.
  • Complete With Double Headed Nails For Easy Removal.
  • Included Along With The Template Are A High-Speed Mortise Router Bit With Bearing Brads, Instructions.
  • 8 Hinge Sizes From 2-1/2 Inch To 6 Inch And 5 Door Sizes From 1-3/8 Inch To 2-1/2 Inch.
  • Quick and easy set up with lock-in pins to ensure security.
  • Complete with double headed nails for easy removal.
  • Included along with the template are a high-speed mortiser router bit with bearing brads, instructions.
  • 8 hinge sizes from 2-1/2 inch to 6 inch and 5 door sizes from 1-3/8 inch to 2-1/2 inch.
  • Made from Fiberglass, reinforced plastic with extended platform for better router stability.
Check Stock

Duncan Toys Yo-Tility Holster, Portable Yo-Yo Accessory

  • VERSATILE YO-YO ACCESSORY: Yo-yo on-the-go! The Duncan Yo-tility holster allows you to easily attaches your yo-yo to to belt loops, backpacks, and more..
  • BEARING REMOVAL TOOL: The Yo-tility holster has a built-in bearing removal tool so that you can easily change bearings anywhere you go..
  • BUILT-IN STRING CUTTER: The Yo-tility holster is equipped with a small string cutter for yo-yo string adjustments anytime, anywhere..
  • PRODUCT DETAILS: Includes [1] Yo-tility Yo-Yo Holster. Can be used with most yo-yos. Measures 6.5 in x 16 cm..
Check Stock