Top Battery Terminal Tool Reviews

Katzco Red Precision Magnetizer and Demagnetizer - 3 Pack - for Screwdrivers, Screws, Drill Bits, Sockets, Nuts, Bolts, Nails, Drivers, Wrenches, Tweezers, and Other Steel Tools

EASY TO USE- No batteries or electrical required.To magnetize a tool, simply slide it through the center hole. To de-magnetize a tool, slide it through the side slots. If you need to work with electronic parts requiring demagnetized tools, just insert the screwdriver tip in the negative terminal cavity.To magnetize the screwdriver tip, insert it in the positive terminal cavity..
PORTABLE- The lightweight and compact design of this magnetizer/demagnetizer makes it amazingly portable to fit in tool bags and super easy to store in workshops/tool sheds. Since it does not require battery, it is even more portable and can be deployed for used at any time..
CONVENIENT- Converts any tool blade to a magnetic retriever of screws, nuts and metallic particles. Perfect for demagnetizing tweezers, screwdrivers and other small tools. Will also magnetize bigger sized tools.Minimize tools slippi....

Check Stock

Battery Jump Post, Briidea Battery Remote Charging Tool Jumper Terminals Relocation Kit Work for UTV ATV Car Trucks RV Tractor Boat

MUST TO HAVE TOOL: The battery terminal kit connects the battery to a more accessible area, it will allows you to easily charge your battery or even jump start your vehicle without removing the annoying rear seat.
STURDY AND DURABLE: With high quality 4 gauge copper wire 4ft long, good electrical conductivity, stability and corrosion resistance, UL listed. Strong lightweight mounting plate, pre-drilled hole to prevent the possibility of arching against important vehicle hardware.
REMOTE BATTERY TERMINAL: Each car batery kit is assembled using the top-quality brass terminal to transmit the maximum power. Equipped with plastic insulation cap*6, easy to identity and prevent crossed cables, waterproof and dustproof, prolong the service life.
EASY INSTALLATION: Our battery jump post designs small and compact (the size is smaller than other products), and easy to install in any places where the jumper is convenient for the vehicle. Included accessories: plastic insulation cap and mounting screws.
COMPATIBILITY: Compatible with all UTV/ ATV models, car battery jump post also work for....

Check Stock

iCrimp AP-50BI Battery Cable Ring Terminal Crimper for 8 6 4 2AWG Copper Cable Lugs Heavy Duty Wire Lugs and Battery Cable Ends

Purpose: AP-50BI battery cable terminal crimping tool is designed to crimp 8, 6, 4, 2AWG copper / tinned eyelets in special trapezoid profile..
Suitable for: Heavy duty wire lugs, battery cable ends, bare copper eyelets, tubular ring terminal connectors..
Rotary Die Set: Rotating color coded jaw allows easy identification and one hand die change..
Ratchet mechanism assures a full cycle crimp before releasing and provides stable platform for repeatable terminations.Release trigger helps clear mis-crimps and obstructions easily..
Comfort grip handles helps reduce fatigue during common use.Eccentric adjustment button to adjust the tool to obtain the proper force value..

Check Stock

SOLEILLUNE Battery Cable Lug Crimping Tool for AWG 10, 8, 6, 4, 2, 1 Terminals with 60Pcs 8Specs Copper Ring Cable Lugs Kit Heavy Duty Wire Terminal Crimper for Electrical Connectors

... handle of the Wire Crimper tool is made of high-quality 6061-T6 aluminum alloy, with a lighter weight of only 2.35 pounds, which makes the crimping tool more convenient to carry and use. The head of the wire crimping tool is made of high-quality carbon steel with longer service life. The long handle of the battery terminal crimper wrapped with non-slip soft vinyl help you use less effort when crimping..
【ROTATE CRIMP DIES】The professional cable terminal crimping tools are available in 6 crimping sizes, 10, 8, 6, 4, 2, 1 AWG (Corresponding to 6mm²/10mm²/16mm²/25mm²/35mm²/50mm²), and use a hexagonal rotating crimp die which is retained in place with a spring loaded locking pin. Thanks to processed by Wire EDM Cutting, the crimp die is more accurate than the ordinary casting die or stamped die..
【EASY OPERATION】Open the handle of the crimper, then press the Lockpin and rotate the crimp jaw to the size you need, place the cable and lug, then pull strongly on the ratcheting wire terminal crimper to make a great crimp on the cable lugs. Finally, rotate the connector 90 degrees to another direction and repeat the previous step for secondary crimping. Crimping twice is more secure..
【APPLICATION AND COMPATIBLE】Compatible with copper, aluminum....

Check Stock

Open Terminal Connector Crimping Tool Kit,2.8mm 3.5mm 3.9mm 4.8mm 6.3mm 24-14 AWG Crimper SOMELINE for Use on Molex 2.13mm 2.36mm AMP - TE CONNECTIVITY Connectors,Male Female Spade and Ring Terminal

✅ 【Adjustable Crimping Tool】With an automatic adjustment ratchet mechanism, an adjustable locking device, and the function of releasing pressure points. crimper tool is designed to crimp 24-14 AWG non-insulated open barrel, OEM-style terminals and wire splices It provides the perfect crimping service for the connector you buy..
✅【 Crimping Pliers Capacity】Crimping tool has a wide range of crimping capacity. It’s capable of crimping 2.8mm, 3.5mm, 3.9mm, 4.8mm and 6.3mm pitch open barrel terminals from Molex Standard .093"/MX150/MLX Crimp Terminal , AMP - TE CONNECTIVITY Mate-n-Lok/FASTON Connector etc..
✅ 【Type and Size】The terminal block is made of copper, which has high conductivity, oxidation resistance and durability, enough to meet the needs of most DIY projects. 240 wire crimp terminals (TAB 2.8mm, 4.8mm, 6.3mm spade connectors and insulating sleeves) for 24-14 AWG cable. A portable storage box is provided for easy storage and sorting of cable terminations..
✅【Ring Terminal】Brass ring terminals, commonly used for cycling battery connections and ground connections, connecting aftermarket switches, ignition coils, ground wires, and similar items that require screws or bolts..
✅【Widely Application】The combination of crim....

Check Stock

2PCS Battery Terminal Connectors 4way Positive Negative Battery Clamp car Terminals Connector Battery Terminal Quick Release Disconnect for SAE/JIS Type A Posts with Terminal Cleaning Brush(Silver)

【Easy to Use】 With positive and negative labeled, easy to identify. 1 hex key provided for easy installation. Quick disconnect. After installing battery, connect to the battery posts by pressing down the lever, so no tool needed..
【Convenient and Firm】 The Battery Terminal has 4 way terminals, designed for multiple connections. Wiring is easy to modify. Convenient wiring and firm connection..
【Made of High Quality】 The Battery Terminal Connectors are made of tinned copper, which is corrosion resistant, with good electrical conductivity.
【Dimension】 For wires diameters 5.2 - 7.4mm (AWG gauges 1 - 4) or section 16 - 35mm². Minimum wire size: 16mm (5/8"). Max wire clamp: 9.5mm/0.37in, Mini wire clamp: 6.5mm/0.25in. Positive inner diameter: 17.5~19.1mm, Negative inner diameter: 15.9~17.5mm..
【Wide Application】 Fits on round post auto batteries SAE/JIS Type A posts. The positive and negative battery terminal connectors can be used for Cars, Vans, Caravan, Motorhomes, Truck Batteries, Car Audio, etc. Note：If you receive defective parts, don’t worry, please tell us immediately, we will give you the perfect solution！！.

Check Stock

2PCS Battery Terminal Connectors 4 Way Quick Release Disconnect Battery Terminals Positive Negative Battery Cable Ends for SAE/JIS Type A Posts by ZONBANG Copper

【4 WAY BATTERY TERMINAL】There are 4 posts for wire connection in the battery terminal connectors which are mainly used for SAE / JIS Type A car battery. The purpose of the design is for multiple cable connections..
【EXCELLENT QUALITY】With superior corrosion resistance and electrical conductivity, the tinned copper quick release battery terminal also can reduce voltage distortion and transmission loss..
【EASY TO IDENTIFY】With the signs of positive “+” and negative “-”, the quick disconnect battery terminal is easy to identify. And the battery terminal works great for replacing worn out and corroded terminals. Tip: Make sure to choose the correct terminal for the correct polarity..
【PACKAGE INCLUDE】You will receive 2PCS battery terminal connectors(positive and negative), 2PCS anti-corrosion fiber washers and an allen wrench..
【WIDE APPLICATION】The battery terminal connectors can be used for Trailer, Winch, Truck, Tractor, Jeep, RV, Cars, Vans, Caravan, Boat, etc..

Check Stock

Vignee 82 Pcs Terminal Removal Key Tool, Terminal Pins Puller Repair Removal Tools for Car Pin Extractor Electrical Wiring Crimp Connectors and Most Connector Terminal with a Protective Bag

Terminal Removal Key Tool, with a Protective Bag.Terminal Pins Puller Repair Removal Tools for Car Pin Extractor Electrical Wiring Crimp Connectors and Most Connector Terminal..
Effortless Terminal Removal: The Terminal tool no need to pry the terminals! just insert our tool, push and pull the terminal pins for removal. Our tool provides extra leverage so you can easily remove the wire.The terminal pin back set is the most convenient line inspection and removal kit..
High Quality：The Pin extractor tool made of premium steel spring plate + plastic. It is flexible and durable.The width of the pin can be manually changed and it would restore its original shape..
Easy and Safe to Use: It is easy to remove the terminal wire from the harness connector and add a new wire without any damage.Easy to use, you can maintain the factory original harness and plug in your own electronic device without any destroying..
Wide Compatibility: These terminals removal tools are common tools for most connector terminals, suitable for most cars, such as:motorcycles and other electronic devices like household appliances..

Check Stock

Battery Terminal Connectors(1 pair), Positive & Negative Auto Battery Cable Terminal Top Post With plastic bottoms(Copper Tinned),Fit For Nissan 243407F000,243407F001 Altima Murano etc

Specifications:Positive Battery terminal hole dia: 0.71 IN.Negative battery terminal hole dia:0.63 IN..
Product Quality:The battery terminal connector is made of high quality copper.The has a galvanised surface to give it better corrosion resistance. There is a plastic bottom and the screws are made of iron..
Fitment: Compatible with Many Vehicles This Battery Terminal Set Fit For: Nissan Altima Murano Pathfinder Maxima Quest Rogue Titan Versa etc. Replaces part # 243407F000 243407F001.
Package List: 1 Pair Battery Terminals. 1 PCS Battery Terminal Cleaning Brush. 1 Pair Battery Terminal Anti Corrosion Washers.
SATISFACTION&GUARANTEED:Purchase this Car Battery Cable Terminal Clamps Connectors with a 6 Month Warranty. We provide carefree return, If you have any issues with your order, contact us and we will make it right..

Check Stock

Hydraulic Cable Crimper and Swage Tool. Great for Crimping Battery Lugs, Large Electric Cables or Swaging Stainless Steel Cable/Rope.

Can crimp any wire from 14 gauge to 00 gauge. Any heavy gauge electrical wire lug, connector, or terminal that needs crimping this will get the job done..
Great to swage stainless steel wire/rope up to 1/8th inch. Although our test show it will crimp 3/16th we do not warranty it for use on 3/16th but we always accept returns in the first 45 days. Easily make a wire rail fence around the deck, yard, or install new rigging in your boat. Anytime you're installing new steel cable this does the job with less effort..
Hydraulic tools allow for way more force from a much smaller package. It requires a 36" mechanical crimper/swage tool to compare to the force this tool generates. Imagine trying to crimp a battery terminal under the hood with one of those. Trust us this is better..
Our kit includes 8 different size die heads, these can be adjusted 180° to help accommodate tight spaces. Please note this tool requires very little effort to crimp. During our testing we had a lot of over-crimping. It should never feel like the crimp has to be forced. Especially important on the 00 electric or the 3/16th stainless.....

Check Stock

Battery Cutoff Switch Top Post Battery Disconnect Switch Rustproof Safe Brass Stable Current Good Electrical Conductivity Battery Terminal Link Quick Switch for 6V 12V Car RV ATV

Wide Application: This battery terminal cutoff switch has wide range of uses, and is compatible with 6V 12V cars, vans, large trucks, pickups, buses, etc..
Strong Function: The battery terminal isolator switch is used for battery to isolate and secure the electrical system, and can eliminate any power draw from the battery when vehicle or boat is not in use, disconnects the battery safely..
Good Electrical Conductivity: The battery terminal isolator switch can be installed on the negative terminal of the battery, which can stable current, and protect the battery, and prevent leakage..
Brass Material: This top post battery disconnect switch is made of brass material, which is rust resistant, good electrical conductivity, durable and safe to use..
High Reliability: The battery terminal isolator switch is professionally manufactured, and battery terminal link quick switch has high performance, strong reliability, making sure use..

Check Stock

TKDMR 2Pairs Car Battery Cable Terminal Clamps-Connectors - Battery Terminal with Plastice Cover,Good Contact,Corrosion Resistance,Applicated in Car,Van.

√【Package Includes】: Our kit includes 2 pair of Negative and Positive Battery Cable Terminal Clamps Connectors and 4 pieces Pure Copper Wire Lugs Battery Cable Ends Copper Eyelets Tubular Ring Terminal Connectors..
√【High Quality】: Our Wire Lugs Eyelets Tubular Ring Terminal all are made of pure copper.And the Battery Terminals connectors has plastic cover, which is connected better than zinc alloy and has better corrosion-resistance..
√【Size】: Positive Battery Terminal Connectors:11/16"(17mm).
Positive Battery Terminal Connectors: 5/8"(16mm).
√【Applicated Scene】: It is used for automobiles, trucks and caravan battery terminal connector..
√【Quality Guarantee】: We are manufacturers. So don't worry about quality. We are highly confident with our products.you won't regret it if you got it! Buy it now!.

Check Stock

LotFancy Battery Terminal Connectors Tinned Brass 4PCS Quick Release Disconnect Car Battery Terminal 4 Way Positive Negative for SAE/JIS Type A Posts

【4 Way Battery Terminal】Pack of 4. This battery terminal connector has 4 post for wire connection. Designed for multiple cable connections. The provided Alan wrenches make for easy installation. Wiring is easy to modify. Convenient wiring and firm connection. Fits on round post auto batteries SAE/JIS Type A posts. NOTE: Do not overtighten the screws.
【Dimension】For wires diameters 4.1 – 8.2mm (AWG gauges 0 – 16) or section 13.5 – 53.5mm². Minimum wire size: 16mm (5/8"). Max wire clamp: 9.5mm/0.37in, Mini wire clamp: 6.5mm/0.25in. After installing battery, connects to the battery posts by pressing down the lever, so no tools needed.
【Positive & Negative Labeled】 Positive (17.5mm-19.1mm) Battery Terminal Connector + Negative (15.9mm-17.5mm) Battery Terminal Connector. The Positive Negative Battery Terminal Clamp is Suitable for Most Battery models. Works great for replacing worn out and corroded terminals.
【Sturdy & Durable】The battery terminals are made of tinned brass, with good electrical conductivity and corrosion resistance, which can reduce voltage distortion and transmission loss.
【Wide Application】These battery terminal connectors can be used for Cars, Vans, Caravan, Motorhomes, Truck Batteries, Car Audio, etc. Ju....

Check Stock