Top Battery Production Board Reviews

Coral Dev Board

  • A development board to quickly prototype on-device ML products. Scale from prototype to production with a removable system-on-module (som).
  • Performs high-speed ML inferencing: the on-board edge TPU Coprocessor is capable of performing 4 trillion operations (tera-operations) per second....
  • Provides a complete system: a Single-board computer with SoC + ML + wireless connectivity, all on the board running a derivative of Debian Linux We....
  • Supports tensorflow Lite: no need to build models from the ground up. Tensorflow Lite models can be compiled to run on the edge TPE.
  • Supports automl vision edge: easily build and deploy Fast, high-accuracy custom image Classification models to your device with automl vision edge.
Check Stock

12S-16S 13S 14S 15S 5A Capacitor Active Equalizer Balancer LFP Lifepo4 Lithium Lipo/Titanate LTO Battery Energy Transfer Active Equalization Module Faster Whole Group Balance

  • 【USE Tips】: The voltage gap of each battery must be within 0.5V. When the battery voltage difference does not reach more than 0.1V, the light on the balance board is triggered by mistake. The light actually has no balance current when it lights up, and it will automatically go out after a period of time. So We suggest re-plugging the cable to solve the problem.【Note that】It takes time to equalize the voltage, hot is normal and it does not take effect immediately after plugging it in..
  • Working Voltage: 1.8V-4.5V, suitable for NCM Ternary polymer lithium battery (Li-ion), lithium iron phosphate battery (LiFePO4),lithium titanate battery (LTO). 【Tips】When buyers have problems, please be sure to take the initiative to contact us, and trust us have the ability to solve your problems, rather than a direct refund returns. This can prevent many products from being discarded and wasted..
  • Working Principle: Flying capacitor transfer charge transporter, Balancer board is connected to the battery to start the balance work, using the original brand new ultra-low internal resistance MOS, 2OZ copper thickness PCB. Balance current 0-5.5A, the more balanced the battery c....
Check Stock

Thometh Multitester-MLC500 LC Meter 500kHz Digital Capacitance Inductance Meter Auto Ranging Component Tester, Black

  • ...ms). Maximum test speed: 20 times/s. Constant 100Ω output impedance. Auto LCR..
  • 2.8-inch TFT LCD display. High-brightness white backlight. Data hold. Recording mode. Standard Mini-USB communication interface. SCPI command set. Perfectly fit the measurement and screening of inductance, capacitance, and resistance in production lines, maintenance points,etc..
  • Built-in rechargeable battery with large-capacity. 8h long battery life. For evaluation of resistance, parameters of capacitors, inductors, magnetic cores, resistors, piezoelectric devices, transformers, chip components, network components, circuit boards, relays, switches, cables, batteries, etc..
  • Reliable & Easy to Use. LED alarm for tolerance. Certified CE and RoHS. What you get: 1 x UT622A LCR meter, 1 x power adapter (5v/1a), 1 x UTR-002 Alligator clip test leads with rubber plugs (pair), 1 x UTR-001 plated short circuit board, 1 x USB cable, 1 x paper manual (En), 1 x gift box..
  • UNI-T WARRANTY – A trouble-free experience with 100% 18-MONTH WARRANTY and 100% MONEY BACK GUARANTEE by UNI-T Direct!.
Check Stock

Fielect 5Pcs Single-sided Copper Clad Laminate PCB Circuit Board FR4 200mmx150mmx1.6mm DIY Prototyping PCB Board

  • 100% OEM factory direct- brand new production dates.
  • Assembly control board for Liftmaster operators 3850 & 8500.
  • Liftmaster door opener receiver logic board replacement for board number 41db002-2.
  • Also known as: 41db002-2 receiver logic board, 315mhz.
Check Stock

Oxygen 61 MK IV - 61-Key USB MIDI Drum Pad and Keyboard Controller

  • Compact, ultra-portable performance keyboard controller with 61 full-size, synth-action velocity-sensitive keys and on-board pitch bend and modulation wheels for expressive performances.
  • 8 velocity-sensitive trigger pads for beat production and clip launching.
  • 8 assignable knobs and 9 assignable faders for manipulating virtual instruments, DAW parameters and plugins - on-board LCD screen provides instant parameter feedback.
  • Dedicated octave up and down buttons increase the keyboard to the full melodic range and transport buttons let you control your DAW without reaching for the mouse.
  • Innovative DirectLink automatically maps controls to popular DAWs including Ableton Live, Pro Tools, Logic, Cubase and more.
  • Class compliant, plug-and-play functionality and USB powered specification for simple user-friendly setup.
  • Comprehensive production software package for Mac and PC worth over $100 included.
  • Ableton Live Lite, SONiVOX Twist and AIR Music Tech Xpand!2.
Check Stock

XT30 XT60 Balance Board RC Lipo Battery Parallel Charging Board,2 in 1 PG Parallel Charging Plate XT30 XT60 Plug Supports 4 Packs for 2S-6S Lipo Battery

  • 2 in 1 lipo battery parallel charging board lipo charger,supporting XT60 connector and XT30 conector lipo battery.It is just a parallel charging board, not a diret charger, need to connect with a charger which support the balance port ( JST connector).
  • Thicken PCB copper foil, allow security using 35A charging current..
  • This lipo balance charging board supports up to four packs of the same type, same cells 2S-6S lipo battery pack,such as 2S lipo battery,3S lipo battery ,4S lipo battery,5S lipo battery,6S lipo battery..
  • Equipped with 40A fuse between any two groups of batteries, to prevent line burned due to the large battery pressure.
  • Output Connector:XT30 connector /XT60 connector,support xt30 and xt60 lipo batteries..
Check Stock

General Electric IM6 Ice Maker Kit

  • Anti-jamming feature and water level sensor help control ice production.
  • Electronic control board and on/off switch stop cube production when necessary..
  • For use in most GE side-by-side, bottom-freezer and top-mount refrigerators.
  • Includes ice bucket, fill tube, water inlet valve, installation materials and hardware.
Check Stock

Bluetooth Amplifier Board 25W+25W HF63 Dual Channel Audio Amplifier DC 10-25V Digital Amplifier Module with TDA7492P Chip

  • High Quality : The amplifier board adopts TDA7492P power amplifier chip, high quality electronic components and military grade PCB board, durable in use..
  • 2 Channel : This board is designed with dual channel output, 25W left channel and 25W right channel, high transmission rate and good sound quality..
  • Bluetooth Connection : The amplifier board is designed with Bluetooth V2.1 module and power supply reverse connection protection, convenient and safe to use..
  • Application : This digital amplifier board is suitable for upgrading and refitting the idle sound box and DIY production. It is suitable for speaker of 4Ω, 6Ω, 8Ω, 16Ω (8Ω is the best)..
Check Stock

Electron Board Mini | 26' 350W Motor Samsung Battery Electric Skateboard with Wireless Remote

  • ➢ Performance - Cruise around at speeds up to 12 mph with the silent single 350W hub motor. Choose between beginner or advanced riding modes. This brushless hub motor provides both power and a sleek look..
  • ➢ Wireless Remote - Have full control of the acceleration and braking with your ergonomic remote. No setup needed as it will auto pair with your board. Ride it straight out of the box..
  • ➢ Smart Turn On - The board will automatically turn on as you start to ride it. No need to ever reach down to turn it on. Turns off automatically if it's not in use for 5 min..
  • ➢ Safe Samsung Battery - This board is equipped with a 2.2Ah SAMSUNG lithium battery. With a SAMSUNG battery you can be confident in the safety and the power of the battery. This battery will get you a range of up to 5 miles..
  • ➢ Portable and Convenient - With its compact form factor and weight of only 8 pounds, it's easy to carry around. The board is made from 7 layers of Canadian Maple making it light and durable. This electric skateboard can also be ridden as a regular skateboard when there's no charge left..
Check Stock

Mini Drill Press, 340W Mini Bench Drill Press Portable Drill Press Stand, 0-16000rpm 3-Speed Adjustable Benchtop Drill Machine Compact Portable Drill Press for DIY Furniture (340W Black&Silver)

  • ...rability and precise drilling. The workbench allows the installation of fixtures and vise to achieve effective workpiece clamping..
  • 【WIDE RANGE OF APPLICATIONS】 Mainly used for drilling non-hard materials such as wood, plastic board, resin board, aluminum board, and composite board. It can be widely used in mass production of machinery manufacturing, repair parts, and can also be used in the production of DIY furniture..
  • 【SHIPPING & CUSTOMER SERVIC】 We ship directly from the US warehouse. We packed the item as good as we can, if there is any damaged part, please feel free to contact us and offer us pictures of damaged part, we will solve the problem as the way you want(discount or replacement)..
Check Stock

Kids Toys 12 inch Writing Tablet Colorful LCD Doodle Board Drawing Tablet Learning Art Creation Toys Birthday Gifts for Kids Boys and Girls

  • Protect Eyesight Color LCD board◆The writing board uses ‎12 inch color LCD board, writing is clear and smooth, and the light is soft, which better....
  • Easy to use◆Use the stylus to slide on the drawing board to show colored lines, and display different thicknesses according to the force you push.....
  • Good Toys Gifts for Kids◆Every child is a born artist. This product is a doodle board, drawing board, writing board, doodle board, children's....
  • Portable and durable◆The doodle board can write 100,000 times, the built-in battery has a service life of 12 months, and the battery can be replaced....
  • Great Learning board◆We can use the drawing board to learn to write, count, and draw. It is inevitable that we will make mistakes in the learning....
Check Stock

M-Audio Oxygen 25 IV | USB Keyboard and Pad MIDI Controller Featuring Pad/Velocity - Sensitive Keys

  • Compact, ultra portable performance keyboard controller with 25 full size, synth action velocity sensitive keys and on board pitch bend and modulation wheels for expressive performances.
  • 8 velocity sensitive trigger pads for beat production and clip launching, and 8 assignable knobs for manipulating virtual instruments, DAW parameters and plugins on board LCD screen provides instant parameter feedback.
  • Dedicated octave up and down buttons increase the keyboard to the full melodic range and transport buttons let you control your DAW without reaching for the mouse.
  • Innovative DirectLink automatically maps controls to popular DAWs including Ableton Live, Pro Tools, Logic, Cubase and more.
  • Class compliant, plug and play functionality and USB powered specification for simple user friendly setup.
  • Comprehensive production software package for Mac and PC worth over dollar 100 included.
  • Ableton Live Lite, SONiVOX Twist and AIR Music Tech Xpand.
Check Stock

MakerFocus 4pcs 3.7V Lithium Rechargable Battery JST1.25 Connector 2pin, 852540 3.7V 1000mAh Battery with Protection Board and Insulated Rubber Tape Compatible with ESP32 Development Board

  • Note: The battery overcurrent protection is not a panacea, do not continue to charge and discharge the current and voltage with a large current beyond the range, otherwise the protection board will be damaged and invalid. When using for the first time, please charge and activate the protection board first.
  • 1100mah: The recommended charging current is 0.2A, the maximum is not more than 1A The discharge current is recommended 0.55A, and the maximum is not more than 3A.
  • Over-discharge protection: When the battery is about to run out and the voltage is as low as 3.0V, the protection board will also be turned off and can no longer be discharged, forming an over-discharge protection effect..
  • Overcharge protection: When charging the battery, when the voltage reaches the highest battery voltage (4.2V), the protection board will automatically power off and shut down, indicating that it will not continue to charge when fully charged. form an overshoot protection..
  • Short circuit protection: When an accidental short circuit occurs, the protection board will automatically shut down within a few milliseconds and will not be powered on again. Note that the cell is short-circuited (not through the protection board). The protection board will also fail due to continuous ....
Check Stock