Top Battery Connector Reviews

UpBright 5V AC/DC Adapter Compatible with Novatel Verizon Wireless MiFi 4510L 4620L 5510L 6620L 6620LE 2200 Jetpack 4G LTE Mobile Hotspot Netgear AC791L Ellipsis MHS700L MHS800L MHS815L MHS900L

First adjust the push plate to accommodate the size of your battery (battery not included).
The push plate can be pull down fit various size battery (up to 76mm) as shown in the picture.
Place the battery on the push plate and align the 2 adjustable connector pong with the battery -/+ (If you can not identify the -/+ on the battery, it is usually the first and last charge connector on the battery).
Simply plug the dock to a power oulet to start charging your battery..
Charge status indicator LED ( Red LED indicate charging, Green indicate idle).
If Red LED does not indicate, please properly adjust the 2 -/+ pongs connector with the battery -/+. If the battery have 3 or 4 charge connector, the -/+ are usually the first and last charge connector of the battery..

Check Stock

ORCISH Battery Quick Connect Disconnect Electrical Plug 2-4 Gauge 175 Amps for Recovery Winch or Trailer (White)

Wide applications: the battery quick connector provides simple and convenient method for connect disconnect power to a winch or other electrical device such as remote battery chargers, power inverters, solar setups, trailers, or for any other purpose requiring a high-current, quick-disconnect connector.
Package comes with 6 sets 6-10 gauge battery quick connector, including 6 connectors, 12 terminal pins, 6 caps, enough quantity to meet your different needs or replacement.
Quality material: the battery quick connector plug is made of sturdy PC fire-retardant material with fitted rubber boot covers to protect against dust, moisture, have long service time.
Easily installation: you can install these battery cable quick connector disconnect plug quickly, insert the wires into the terminal pins, and then solder or crimp them, connector ends are identical, so either ends are suitable for connection to the power or load side.
Stable working environment: there are 12 terminal pins made of red copper coated with silver have strong electrical conductivity and reduce the resistance to ensure stable voltage and current.

Check Stock

ZZcell Battery For Honeywell Alarm Lynx L3000, Lynx L5000, Lynx L5100, 300-03864-1 1500mAh (NOTE: Battery Connector - 2 Prong)

Volts:7.2Volts / Type: Ni-MH- (NOTE: Please Check Connector Image For Compatibility) (NOTE: Battery Connector – 2 Prong).
Capacity: 1500 mAh ( Battery will fully charge after installation ).
Compatible Part Numbers: Honeywell Lynx L3000, Lynx L5000, Lynx L5100 (NOTE: Please Check Connector Image For Compatibility) (NOTE: Battery Connector – 2 Prong).

Check Stock

Buachois 2 Sets 50A 6AWG 600V Battery Connector Plug Lightweight Quick Connect Disconnect Wire Harness Plug Kit Towing Winch Quick Connect Systems(Black)

Wide range of applications: the battery quick connector provides simple and convenient method for connect disconnect power to a winch or other electrical device such as remote battery chargers, power inverters, solar setups, trailers, or for any other purpose requiring a high-current, quick-disconnect connector.
Size information: voltage: 12-36 volts DC.
package comes with 6 sets 2-4 gauge battery quick connector, including 6 connectors, 12 terminal pins, 6 caps, enough quantity to meet your different needs or replacement.
Quality and durable material: the battery quick connector plug is made of sturdy PC fire-retardant material with fitted rubber boot covers to protect against dust, moisture, have long service time.
Convenient installation: you can install these battery cable quick connector disconnect plug quickly, insert the wires into the terminal pins, and then solder or crimp them, connector ends are identical, so either ends are suitable for connection to the power or load side.
Stable working environment: there are 12 pieces terminal pins made of red copper coated with silver have strong electrical conductivity and reduce the resistance to ensure stable voltage and current.

Check Stock

SKYRC iMAX B6 Mini Professional Balance Charger / Discharger for RC Lipo Battery Charging

Lithium Battery Meter: Plug your LiPo/LiIon/ LiFe balance plug into the charger and use the battery meter as a voltage tester to quickly see the voltage readings from each cell..
Internal Resistance Meter: Use this function to measure the resistance in each of your lithium battery's cells. This helps determine the health of your cells, to be sure you are getting the most power out of them..
This charger and the battery should be put on a heat-resistant, noninflammable and nonconductive surface. Never place them on a car seat, carpet or similar. Keep all the inflammable volatile materials away from operating area..
Genuine, Authentic, Original iMax B6 Mini Charger by SkyRC w/ Anti-Fake Holographic Serial Number on the back of the charger. This number can be inputted into SkyRC's website to prove its authenticity..
Package Contains: 1x SKYRC B6 mini Charger.
1x T Plug with Banana connector Charging Cable.
1x DC Cable with Alligator Clip Charging Connector.
1x T Plug with Alligator Clip connector Charging Cable.
1x T Plug with Futaba connector Charging Cable.
1x T Plug with JST connector Charging Cable.
1x T Plug with XT60 connector Charging Cable.

Check Stock

uxcell 3pcs DC 9V Battery Clip T-Type Buckle Connector Faux Leather Housing Lead Wire 12cm Long

Package Content: 3pcs x Battery Clip Connector.
Buckle Size: 28 x 21 x 6mm / 1.1" x 0.83" x 0.24" (L*W*H).
9V battery clip connector, T-type faux leather housing, 2 wire connector..
Simple operation, compact size, replacements for replacing your old or damaged ones..
12cm stripped and tinned leads, 1 red and 1 black for easy identification and soldering terminal connector for 9-volt battery or for DIY projects..

Check Stock

uxcell 10pcs DC 9V Battery Clip T-Type Buckle Connector Faux Leather Housing Lead Wire 12cm Length

Package Content: 10pcs x Battery Clip Connector.
Buckle Size: 28 x 21 x 6mm / 1.1" x 0.83" x 0.24" (L*W*H).
9V battery clip connector, T-type faux leather housing, 2 wire connector..
Simple operation, compact size, replacements for replacing your old or damaged ones..
12cm stripped and tinned leads, 1 red and 1 black for easy identification and soldering terminal connector for 9-volt battery or for DIY projects..

Check Stock

uxcell 7pcs DC 9V Battery Clip I-Type Buckle Connector Faux Leather Housing Lead Wire 14.5cm Length

Package Content: 7pcs x Battery Clip Connector.
Buckle Size: 30 x 16 x 6mm / 1.18" x 0.63" x 0.24" (L*W*H).
9V battery clip connector, I-type faux leather housing, 2 wire connector..
Simple operation, compact size, replacements for replacing your old or damaged ones..
14.5cm stripped and tinned leads, 1 red and 1 black for easy identification and soldering terminal connector for 9-volt battery or for DIY projects..

Check Stock

uxcell 3pcs DC 9V Battery Clip I-Type Buckle Connector Faux Leather Housing Lead Wire 14.5cm Length

Package Content: 3pcs x Battery Clip Connector.
Buckle Size: 30 x 16 x 6mm / 1.18" x 0.63" x 0.24" (L*W*H).
9V battery clip connector, I-type faux leather housing, 2 wire connector..
Simple operation, compact size, replacements for replacing your old or damaged ones..
14.5cm stripped and tinned leads, 1 red and 1 black for easy identification and soldering terminal connector for 9-volt battery or for DIY projects..

Check Stock

uxcell 10pcs DC 9V Battery Clip I-Type Buckle Connector Faux Leather Housing Lead Wire 14.5cm Long

Package Content: 10pcs x Battery Clip Connector.
Buckle Size: 30 x 16 x 6mm / 1.18" x 0.63" x 0.24" (L*W*H).
9V battery clip connector, I-type faux leather housing, 2 wire connector..
Simple operation, compact size, replacements for replacing your old or damaged ones..
14.5cm stripped and tinned leads, 1 red and 1 black for easy identification and soldering terminal connector for 9-volt battery or for DIY projects..

Check Stock

uxcell 14pcs DC 9V Battery Clip I-Type Buckle Connector Faux Leather Housing Lead Wire 14.5cm Length

Package Content: 14pcs x Battery Clip Connector.
Buckle Size: 30 x 16 x 6mm / 1.18" x 0.63" x 0.24" (L*W*H).
9V battery clip connector, I-type faux leather housing, 2 wire connector..
Simple operation, compact size, replacements for replacing your old or damaged ones..
14.5cm stripped and tinned leads, 1 red and 1 black for easy identification and soldering terminal connector for 9-volt battery or for DIY projects..

Check Stock

Blomiky 7.4V 600mAh Li-ion Rechargeable Battery Compatible with Some Gel Water Ball Blaster and WPL C24 D12 RC Truck / D12 Battery 2

Important Notice: There are 2 kind connector plug battery replacment for Water foam Blaster toys, This is SM-2P black 2 pin plug, if you need another kind plug battery,please choose another battery ASIN: B09Q3CCBFY instead. this battery real capacity about 600mAh.SM-2P black 2 pin connector plug,plug end cross-section size:5.6*4.9mm/0.22*0.19in . Red cable is positive, black cable is negative, please make sure your device plug positive polar in same line. or else will cause short circuit..
Discharge plug SM-2P black 2 pin connector, Battery weight 37grams/1.31oz, Lithium battery capacity 600mAh , Voltage:7.4V 2S, Discharge rate: 15C. 2S 600mAh Li-ion rechargeable battery fit..
7.4V 2S Lithium battery dimensions:L54*W28.4*H14.5mm/2.12*1.12*0.58inch. Make sure your battery room and connector fit. 7.4V 600mAh Lihium batter replacment for CAISSA Electric Gel Water Ball Blaster Splatter,..
7.4V 600mAh 2S Li-ion rechargeable battery replacement for Some Gel Water spaltter ball blasters. Battery replacement for C24-1 RC Car Crawler 4WD Off-Road Truck..
7.4V 2S 600mAh Li-ion battery replacement for WPL D12 1/10 RC Car Truck and C24-1 Remote control Cars. Battery compatible with some kind Electric water foam ball Blaster., which battery plug is same SM-2P black 2....

Check Stock

Sony ECM77B Electret Condenser Lavalier Microphone, Black

Omni-directional lavalier condenser microphone with AA battery power supply and XLR connector.

Check Stock