Top Battery Cable 0 Reviews

AKG K182 Recording Studio Monitor Headphones+Rechargeable Headphone Amplifier

  • Package Includes: (1) AKG K182 Professional Closed-Back Recording Studio Monitor Headphones/Swivel. (1) RockvilIe HeadRock Battery Powered Rechargeable Personal Headphone Amplifier Amp. Features: AKG K182 Professional Closed-Back Recording Studio Monitor Headphones. Audio Frequency Bandwidth: 10 Hz - 28 kHz. Sensitivity: 112 dB SPL/V. Max Input Power: 500mW. Input Impedance: 32 Ohms.
  • Product Weight: 0.56 Lbs. Cable Length: 3 meters. High Sensitivity 50mm Transducers: Provide great sound even with mobile devices. Headphone Type: Closed-Back. Over Ear Design with replaceable ear pads. Detachable cable and screw-on adapter. Foldable. Detachable Cable. Applications: Studio Monitoring, Studio Mixing, Live Performance, Drummer, Mobile Devices. Includes: (1) x headphone amp.
  • (1) x Micro USB cable. (1) 3.5mm male to male audio jack cable. Manual and warranty card. Features: RockvilIe HeadRock Battery Powered Rechargeable Personal Headphone Amplifier. 3.5MM headphone output. 3.5MM aux input for music player. Lithium Battery with 800mAh capacity. Rechargable battery lasts 5-8 hours per charge. Headphone Amplifier Works with 16 300 Ohm Impedance.
Check Stock

Single 1 AA Battery Holder, 1 X 1.5V AA Battery Holder, AA Battery Holder with Leads Wires (5-Pack)

  • Type of AA Battery Holder: 1 aa battery holder, 1x 1.5V aa battery holder with leads.
  • Package Contents: 5Pcs 1 aa battery holder with wires.
  • Voltage Output of One 1 AA Battery Holder: 1.5V, 1x 1.5v single aa battery= 1.5 volt aa battery holder.
  • Dimensions of 1 AA Battery Holder: 2.248" x 0.669" x 0.539"/5.71cm x 1.70cm x 1.37cm(L*W*H).
  • Weight of "single aa battery holder": 0.141oz/4g.
  • Leads: all aa battery holder with leads, they are tinned wire end.
  • Cable Diameter(count in the PVC isolation around the wire): 0.0393"/1mm.
  • DIY Extension: Join two 1 X 1.5V single aa battery holder with leads can get a 3Volt aa battery holder.
  • Join three 1 X 1.5V single aa battery holder can get a 4.5Volt aa battery holder.
  • Join four, join five, join six......So, by simple DIY, you can got 3Volt aa battery holder, 4.5Volt aa battery holder, 6Volt aa battery holder, 9Volt aa battery holder..
Check Stock

2 Pack 14 Ft Xtreme Control Cables Fits for Johnson, for BRP, CCX20514

  • Clamp Size(Each): 3.5 x 1.6 x 0.7cm/1.4"" x 0.6" x 0.28"(L*W*T).
Check Stock

LAMPVPATH (Pack of 6) Single AA Battery Holder, 1 X 1.5V AA Battery Holder, AA Battery Holder with Leads Wires

  • Type of AA Battery Holder: 1 aa battery holder, 1x 1.5V aa battery holder with leads.
  • Package Contents: 6Pcs 1 aa battery holder with wires.
  • Voltage Output of One 1 AA Battery Holder: 1.5V, 1x 1.5v single aa battery= 1.5 volt aa battery holder.
  • Dimensions of 1 AA Battery Holder: 2.248" x 0.669" x 0.539"/5.71cm x 1.70cm x 1.37cm(L*W*H).
  • Weight of "single aa battery holder": 0.141oz/4g.
  • Leads: all aa battery holder with leads, they are tinned wire end.
  • Cable Diameter(count in the PVC isolation around the wire): 0.0393"/1mm.
  • DIY Extension: Join two 1 X 1.5V single aa battery holder with leads can get a 3Volt aa battery holder.
  • Join three 1 X 1.5V single aa battery holder can get a 4.5Volt aa battery holder.
  • Join four, join five, join six......So, by simple DIY, you can got 3Volt aa battery holder, 4.5Volt aa battery holder, 6Volt aa battery holder, 9Volt aa battery holder..
Check Stock

LAMPVPATH (Pack of 8) AA Battery Holder Bundle 2Pcs Single AA Battery Holder, 2Pcs 2X 1.5V AA Battery Holder with Leads, 2Pcs 3X 1.5V 3 AA Battery Holder with Wire, 2Pcs 4X 1.5V 6 Volt Battery Holder

  • Package includes 8Pcs and 4 types battery holder case boxes: (1) 1 aa battery holder,(2) 2 aa battery holde,(3) 3 aa battery holder,(4>)4x 1.5V 6 volt battery holder.
  • Dimensions of AA battery holder(L*W*H): (1)single aa battery holder with leads: 2.248" x 0.669" x 0.539"/5.71cm x 1.70cm x 1.37cm (2)2 aa battery holder with leads: 2.303" x 1.276" x 0.575"/5.85cm x 3.24cm x 1.46cm (3)3 aa battery holder with wires: 2.287" x 1.906" x 0.567"/5.81cm x 4.84cm x 1.44cm (4)4aa battery holder with wires: 2.248" x 2.457" x 0.622"/5.71cm x 6.23cm x 1.58cm.
  • DIY Extension: Join one 2 X 1.5V aa battery holder and one 4 X 1.5V aa battery holder can get a 9V aa battery holder.
  • Join one 4 X 1.5V aa battery holder and one 4 X 1.5V aa battery holder can get a 12V aa battery holder. so, 9Volt aa battery holder and 12Volt aa battery holder are also on your hands..
  • AA Battery Holder Wire Leads: all aa battery case holder with leads, they are tinned wire end.
  • Cable Diameter(count in the PVC isolation around the wire): 0.0393"/1mm.
  • Weight of One AA Battery Holder: (1)single aa battery holder: 0.141oz/4g (2) 2 aa battery holder: 0.247oz/7g (3)3 cell aa battery holder: 0.388oz/11g (4) 4 cell aa battery holder: 0.459oz/13g.
Check Stock

HTRC LiPo Charger Dual RC Charger 1-6S Balance Battery Discharger C240 AC150W DC240W 10A for Li-ion Life NiCd NiMH LiHV PB Smart Batteries

  • DUAL CHARGER: Our Dual LiPo Battery Charger is upgrade version of C150 charger, it can simultaneously charge two different batteries by two channels(please don't charge two different batteries on the same channel simultaneously). AC input max power 150W(CH1+CH2=150W), 100-240V.
  • DC input max power 240W(CH1+CH2=240W), 11-18V.
  • discharge current: 0.1-2A*2. Our charger's shell is made of fire-proof material..
  • Suitable: The RC Battery Charger can be used for: Li-ion/LiPo/LiFe/LiHV(1-6s).
  • Smart Battery(I,II,III 5-27V, 0.1-6A). (Only charge the rechargeable batteries which meet this specifications of this charger). When the battery is full charged, the battery charger will automatically stop charging. Tips: Please choose the right type of battery when charge. When you charge the battery, please don't use the AC power cable and DC cable at the same time..
  • MULTI-FUNCTION: Our lipo charger has many modes--Charge, Balance Charge, Discharge, Terminal Voltage Control, Lithium Battery Capacity & Voltage Checking, Battery Internal Resistance Checking, Lipo Storage Mode, Data Sto....
Check Stock

AWBLIN Battery Terminal Connectors, 2PCS Quick Release Disconnect Multiple Car Battery Terminal Replacement with Hex Wrench, Positive Negative for SAE/JIS Type A Posts

  • 4WAY BATTERY TERMINALS: This Car Battery Connector Multiple has 4 post for wire connection. Well Designed for multiple cable connections. Wiring is easy to modify. Really Convenient wiring and firm connection. This Heavy Duty Battery Terminals can fit on round post auto batteries SAE/JIS Type A posts..
  • POSTIVE & NEGATIVE: Positive (19mm/0.75in) Battery Terminal Clamps + Negative (17mm/0.67in) Battery Terminal Clamps. The Positive Negative Battery Terminal ends is Suitable for Most Battery models. This Car Battery Cable Ends work great for replacing worn out and corroded terminals..
  • DIMENSION: For wires diameters 0.20in – 0.29in (AWG gauges 1 – 4) or section 16 – 35mm². Max wire clamp: 8mm/0.31in. After the Quick Release Battery Terminals installing battery, connects to the battery posts by pressing down the lever, so no tools needed. The Battery Post Terminals do easy to operation..
  • HIGH QUALITy: The Battery Terminal Ends are made of tinned copper, with good electrical conductivity and corrosion resistance, which can reduce voltage distortion and transmission loss..
  • WIDE APPLICATION: These Automotive Battery Terminals can be used for Cars, Vans, Caravan, Motorhomes, Truck Batteries,RV etc. Just make sure that the Battery Clamps connect the correct....
Check Stock

Car Battery Terminals Connectors with 4 Ways Battery Clamps Quick Disconnect Battery Terminal with Hex Wrench Tinned Copper,Positive&Negative Applicated in Car Truck RV etc.

  • 【4WAY BATTERY TERMINALS】This Car Battery Connector Multiple has 4 post for wire connection. Well Designed for multiple cable connections. Wiring is easy to modify. Really Convenient wiring and firm connection. This Heavy Duty Battery Terminals can fit on round post auto batteries SAE/JIS Type A posts..
  • 【POSTIVE & NEGATIVE】 Positive (19mm/0.75in) Battery Terminal Clamps + Negative (17mm/0.67in) Battery Terminal Clamps. The Positive Negative Battery Terminal ends is Suitable for Most Battery models. This Car Battery Cable Ends work great for replacing worn out and corroded terminals..
  • 【DIMENSION】For wires diameters 0.20in – 0.29in (AWG gauges 1 – 4) or section 16 – 35mm². Max wire clamp: 8mm/0.31in. After the Quick Release Battery Terminals installing battery, connects to the battery posts by pressing down the lever, so no tools needed. The Battery Post Terminals do easy to operation..
  • 【HIGH QUALITY】The Battery Terminal Ends are made of tinned copper, with good electrical conductivity and corrosion resistance, which can reduce voltage distortion and transmission loss..
  • 【WIDE APPLICATION】These Automotive Battery Terminals can be used for Cars, Vans, Caravan, Motorhomes, Truck Batteries,RV etc. Just make sure that the Battery C....
Check Stock

Blomiky 2 Pack 11.1V USB Charger Cable for RC Car Boat Airplane Drone Airsoft 11.1V 3S 3 Cell Lipo Battery 11.1V USB New 2

  • XH-4P white 4 pin connector plug. XH-4P plug cross-section size:10*5.9mm/ 0.4*0.23inch. USB to 11.1V 3S Lipo Battery Charger Cable, fit for 11.1V....
  • Do not charge your battery if battery looks like damage. XH-4P 4 Pin white port, DC 5V 2A,Output 11.1V 1500mA, When charging, green light is blink and....
  • 11.1V Charger Cable fit for RC Car Airplane Airsoft and Truck Drone 11.1V 3 Cell Li-po Battery.
  • 11.1V 3S Lipo Battery USB Charger Cable fit for 11.1V 3S 500mah 850mah 1300mah 1500mah 2200mah 3000mah li-ion or Li-po rechargeable battery ,which....
  • Package include: 2 Pack 11.1V 3S Lipo USB charger Cable.
Check Stock

LAMPVPATH (Pack of 3) 2 AAA Battery Holder with Switch, 2 x 1.5V AAA Battery Holder Case with Wire Leads and ON/Off Switch

  • AAA Battery Type: 2 AAA batteries, 2x 1.5V AAA batteries.
  • Voltage Output of One 2 AAA Battery Holder: 3V, 2x 1.5v aaa battery= 3 volt aaa battery holder.
  • Battery Holder Switch Function: AAA battery holder with ON/OFF switch.
  • Wire Leads: aaa battery holder with wire leads, tinned wire end.
  • Cable Diameter(count in the PVC isolation around the wire): 0.0393"/1mm.
  • AAA Battery Case Dimensions: 2.48" x 1.189" x 0.598"/6.3cm x 3.02cm x 1.52m(L*W*H).
  • One Battery Holder with One Screw Weight: 0.458oz/13g.
  • Package Contents: 3Pcs battery holder with 3Pcs screws.
Check Stock

Electronic Load Battery Capacity Tester, EBC-A40L 5V High Current Lithium Battery Capacity Tester 40A Manual 200W CC/CP

  • EBC-A40L Electronic Load Battery Capacity Tester Charge / Discharge 40A 200W.
  • Voltage Range：0-5V,Voltage Accuracy：0.2%+-0.003V, Current Range：0.1- 40A ( Max charging current is 40A ) , Current Accuracy：0.2%+0.01A.
  • Discharging Mode：CC/CP, Discharging Termination：Time/Cut-off Voltage/Manual, Discharging Power：200W Max.
  • Charging Mode：CV, Charging Termination：Cut-off Current/Manual, Heat Dissipation：Fan, Power Supply：AC110V.
  • Package Included: 1 x Battery Tester,1 x Online cable, 1 x Testing cable, 1 x Power supply cable.
Check Stock

LAMPVPATH (Pack of 3) 2 AAA Battery Holder with Switch, 2 x 1.5V AAA Battery Holder Case with Wire Leads and ON/Off Switch and Cover

  • AAA Battery Type: 2 AAA batteries, 2x 1.5V AAA batteries.
  • Voltage Output of One 2 AAA Battery Holder: 3V, 2x 1.5v aaa battery= 3 volt aaa battery holder.
  • Battery Holder Switch Function: AAA battery holder with ON/OFF switch.
  • Wire Leads: aaa battery holder with wire leads, tinned wire end.
  • Cable Diameter(count in the PVC isolation around the wire): 0.0393"/1mm.
  • Battery Case Dimensions: 2.48" x 1.00" x 0.64"/6.3cm x 2.55cm x 1.62m(L*W*H).
  • Package Contents: 3Pcs battery holder with Cover Switch.
Check Stock

LAMPVPATH (Pack of 2) 2 AA Battery Holder with Switch, 2X 1.5V AA Battery Holder Case with Wire Leads and ON/Off Switch

  • Battery Type: 2 AA batteries, 2x 1.5V AA batteries. There are 2 pcs 2aa battery holder in the package..
  • Battery Holder Switch Function: AA battery holder with ON/OFF switch.
  • Wire Leads: 2 aa battery holder with wire leads, tinned wire end.
  • Cable Diameter(count in the PVC isolation around the wire): 0.0393"/1mm.
  • AA Battery Case Dimensions: 2.71" x 1.34" x 0.75"/6.88cm x 3.4cm x 1.9cm(L*W*H).
  • One Battery Holder with One Screw Weight: 0.67oz/19g.
  • Package Contents: 2 Pcs battery holder with 2Pcs screws.
Check Stock