Top Baseboard Heater Caps Reviews

Baseboarders 2' Length Premium Baseboard Heater Cover Panel Only

  • Baseboarders Premium Series Open End Caps are available in both left and right (sold separately) sides. They are designed for heaters with pipes that continue straight through an adjacent wall. Designed to snap onto the ends of Baseboarders Premium Series panels only.
  • Baseboarders Premium Series end caps, corners, and couplers are only compatible with our own branded Basic Series panels. They will not retrofit to existing baseboard heaters without a Basic Series Panel. This ensures the best fit, and safety design- both child proof and pet proof- for a modern, ultra clean look.
  • Easy DIY installation- no tools or hired help is needed. Snap the Baseboarders end caps on to the Baseboarders replacement cover panel and position the assembly onto the original backplate. With a firm push, the assembly slips into place over the original baseboard heater..
  • All Baseboarders products are galvanized steel with a powder coated semi-gloss white finish. Panels are fabricated in 24 gauge galvanized steel. Endcaps are fabricated in 22 gauge galvanized steel. The panel holes are 1/8” in diameter to allow proper airflow..
  • Intended for hydronic (hot water) baseboard heaters, but will work for electric baseboard heaters. Use basic precautions when using with electric b....
Check Stock

Baseboarders Stainless Steel Heat Cover Replacements for Tall Heaters - 5 ft Panel [Accessories Not Included]

  • ✔️✔️ 5 FT PANEL: Premium replacement baseboard heater cover panel - Must purchase a Baseboarders branded accessories to properly finish installing this product. Please review installation instructions.
  • ✔️✔️ EASY DIY INSTALLATION - Snap the Baseboarders end caps on to the Baseboarders replacement cover panel and position the assembly onto the original backplate. No tools or hired help is needed..
  • ✔️✔️ PREMIUM GALVANIZED STEEL: Compared to plastic galvanized steel replacement baseboard heater covers not only last longer but will hold their beauty longer than plastic or other basic materials.
  • ✔️✔️ EXCLUSIVELY FOR TALL HEATERS: Pairing a panel and standard height products will result in products not correctly, or not fitting at all..
  • ✔️✔️ ADDITIONAL 2 INCHES OF HEIGHT: The standard baseboard heater is 6.75 inches. These tall units are 8.75 inches x 3 inches..
Check Stock

NeatHeat Inside Corner 135 Baseboard Heater Cover

  • Baseboarders Basic Series Inside 90-degree Corner is used to connect two panels that intersect at an inside 90 degree relation to one another with heaters pointing away from you..
  • Baseboarders Basic Series end caps, corners, and couplers are only compatible with our own branded Basic Series panels. They will not retrofit to existing baseboard heaters without a Basic Series Panel. This ensures the best fit, and safety design- both child proof and pet proof- for a modern, ultra clean look.
  • Easy DIY installation- no tools or hired help is needed. Snap the Baseboarders end caps on to the Baseboarders replacement cover panel and position the assembly onto the original backplate. With a firm push, the assembly slips into place over the original baseboard heater..
  • All Baseboarders products are galvanized steel with a powder coated semi-gloss white finish. Panels are fabricated in 24 gauge galvanized steel. Endcaps are fabricated in 22 gauge galvanized steel. The panel holes are 1/8” in diameter to allow proper airflow..
  • Intended for hydronic (hot water) baseboard heaters, but will work for electric baseboard heaters. Use basic precautions when using with electric baseboard heaters, as they operate at higher surface temperatures. Baseboarders products will bec....
Check Stock

Baseboarders Premium Galvanized Steel Easy Slip-On Baseboard Heater Cover - White (Any Size, Coupler)

  • Baseboarders Premium Series Open End Caps are available in both left and right (sold separately) sides. They are designed for heaters with pipes that continue straight through an adjacent wall. Designed to snap onto the ends of Baseboarders Premium Series panels only..
  • Baseboarders Premium Series end caps, corners, and couplers are only compatible with our own branded Basic Series panels. They will not retrofit to existing baseboard heaters without a Basic Series Panel. This ensures the best fit, and safety design- both child proof and pet proof- for a modern, ultra clean look.
  • Easy DIY installation- no tools or hired help is needed. Snap the Baseboarders end caps on to the Baseboarders replacement cover panel and position the assembly onto the original backplate. With a firm push, the assembly slips into place over the original baseboard heater..
  • All Baseboarders products are galvanized steel with a powder coated semi-gloss white finish. Panels are fabricated in 24 gauge galvanized steel. Endcaps are fabricated in 22 gauge galvanized steel. The panel holes are 1/8” in diameter to allow proper airflow..
  • Intended for hydronic (hot water) baseboard heaters, but will work for electric baseboard heaters. Use basic precautions when using with electric ....
Check Stock

Baseboarders Premium Galvanized Steel Easy Slip-On Baseboard Heater Cover - White (Any Size, Zero Clearance End Cap)

  • Baseboarders Premium Series Zero Clearance caps are symmetrical, there are no left or right sides. Used when the original back plate terminates within ½” of adjacent wall. Designed to snap onto the ends of Premium Baseboarders.
  • Baseboarders Premium Series end caps, corners, and couplers are only compatible with our own branded Basic Series panels. They will not retrofit to existing baseboard heaters without a Basic Series Panel. This ensures the best fit, and safety design- both child proof and pet proof- for a modern, ultra clean look.
  • Easy DIY installation- no tools or hired help is needed. Snap the Baseboarders end caps on to the Baseboarders replacement cover panel and position the assembly onto the original backplate. With a firm push, the assembly slips into place over the original baseboard heater..
  • All Baseboarders products are galvanized steel with a powder coated semi-gloss white finish. Panels are fabricated in 24 gauge galvanized steel. Endcaps are fabricated in 22 gauge galvanized steel. The panel holes are 1/8” in diameter to allow proper airflow..
  • Intended for hydronic (hot water) baseboard heaters, but will work for electric baseboard heaters. Use basic precautions when using with electric baseboard heaters, as they operate at higher....
Check Stock

Baseboarders Premium Galvanized Steel Inside 90 Degree Corner Connector - White (Any Size)

  • Baseboarders Premium Series Inside 90-degree Corner is used to connect two panels that intersect at an inside 90 degree relation to one another with heaters pointing away from you.
  • Baseboarders Premium Series end caps, corners, and couplers are only compatible with our own branded Basic Series panels. They will not retrofit to existing baseboard heaters without a Basic Series Panel. This ensures the best fit, and safety design- both child proof and pet proof- for a modern, ultra clean look.
  • Easy DIY installation- no tools or hired help is needed. Snap the Baseboarders end caps on to the Baseboarders replacement cover panel and position the assembly onto the original backplate. With a firm push, the assembly slips into place over the original baseboard heater..
  • All Baseboarders products are galvanized steel with a powder coated semi-gloss white finish. Panels are fabricated in 24 gauge galvanized steel. Endcaps are fabricated in 22 gauge galvanized steel. The panel holes are 1/8” in diameter to allow proper airflow..
  • Intended for hydronic (hot water) baseboard heaters, but will work for electric baseboard heaters. Use basic precautions when using with electric baseboard heaters, as they operate at higher surface temperatures. Baseboarders products will ....
Check Stock

Baseboarders Premium Galvanized Steel Easy Slip-On Baseboard Heater Cover - White (Any Size, Closed End Cap - Right)

  • Baseboarders Premium Series Closed End Caps are available in both left and right (sold separately) sides. They are designed for heaters with pipes that bend down into the floor or back into the wall. They do not continue into an adjacent wall. Designed to snap onto the ends of Baseboarders Premium Series panels only.
  • Baseboarders Premium Series end caps, corners, and couplers are only compatible with our own branded Premium Series panels. They will not retrofit to existing baseboard heaters without a Premium Series Panel. This ensures the best fit, and safety design- both child proof and pet proof- for a modern, ultra clean look.
  • Easy DIY installation- no tools or hired help is needed. Snap the Baseboarders end caps on to the Baseboarders replacement cover panel and position the assembly onto the original backplate. With a firm push, the assembly slips into place over the original baseboard heater..
  • All Baseboarders products are galvanized steel with a powder coated semi-gloss white finish. Panels are fabricated in 24 gauge galvanized steel. Endcaps are fabricated in 22 gauge galvanized steel. The panel holes are 1/8” in diameter to allow proper airflow..
  • Intended for hydronic (hot water) baseboard heaters, but will work for electric baseboard hea....
Check Stock

Premium Series Galvanized Steel Easy Slip-On Baseboard Heater Cover in White (6 ft, Cover, No Accessory)

  • Panel only. End caps and other accessories sold separately..
  • Use only Baseboarders brand accessories..
  • Slips over the original baseboard heater – just remove the existing front panel and end caps..
  • Galvanized steel with a powder coated semi-gloss white finish..
  • DIY installation, no tools, no hired help..
Check Stock

Fahrenheat PLF504 Baseboard Heater, Navajo White

  • This convection heater starts up and stops without the disruptive popping or pinging sounds given off by traditional baseboard models..
  • Keep dust and other particles from circulating, thanks to this hydronic baseboard heater's fanless operation. With no blower or exhaust fan, allergens and dander won't be blowing around the room..
  • For worry-free warmth, the unit's overheat protection feature prevents the heater from running when its air intake is blocked..
  • Wire up and connect this baseboard quickly and easily with its large wiring compartment, dual knockouts and built-in cable clamp. You can connect it to power from either side or even chain multiple units together..
  • Hard-wired unit. 28-in. length. 240 volts, 500 watts, 4.2 amps. Field-installed thermostat..
Check Stock

Cadet F Series 30\ Electric Baseboard Heater (Model: 2F500-1W Part: 05530), 1710 BTU, 120 Volt, 500 Watt, White

  • Powerful: At 500 Watts and 120 Volts, this baseboard heater provides powerful heat to small rooms..
  • Simple: Universal wiring and pre-punched knockouts at 1-inch intervals make floor or wall mount installation easy and low cost..
  • Safe: The electric baseboard heater includes a high-temperature safety shutoff feature to keep your home and family out of harm's way..
  • Contents: Includes one Cadet F Series 30" Electric Baseboard Heater without a thermostat in white..
  • Durable: Enjoy lasting service with a limited lifetime warranty..
Check Stock

Cadet F Series 48 Electric Baseboard Heater Model 4F1000W Part 09954 3415/2560 BTU 240/208 Volt 1000/750 Watt White

  • Powerful: At 1000/750 Watts and 240/208 Volts, this baseboard heater provides powerful heat to small to medium-sized rooms..
  • Simple: Universal wiring and pre-punched knockouts at 1-inch intervals make floor or wall mount installation easy and low cost..
  • Safe: The electric baseboard heater includes a high-temperature safety shutoff feature to keep your home and family out of harm's way..
  • Contents: Includes one Cadet F Series 48" Electric Baseboard Heater without a thermostat in white..
  • Durable: Enjoy lasting service with a limited lifetime warranty..
Check Stock

Dimplex 50' Linear Convector Electric Baseboard Heater Model: LC5020W31), 240V/208V, 2000/1500W White

  • 2000W, 240V, 50", White, Baseboard Heater, 42% Shorter Than Traditional Baseboard, 40% Faster Heat Flow, Responds Quickly To Changes In Temperature.
  • Manufactured In China. Heater Type: Conventional Baseboard Heaters.
Check Stock

EZ Snap Covers 9 Foot Long Standard Height 7 1/2″ Baseboard Heater Cover Kit with 2 Closed End Caps

  • EZ Snap Covers are 20 gauge galvanized steel with white epoxy powder coating. They are guaranteed never to rust and are 18% thicker steel than all comparable baseboard heater covers. End caps are 18 gauge thickness..
  • Our covers fit 95% of all existing hot water baseboard radiator heaters. Installation takes five minutes, requires no power tools, and saves you on pricey contractor bills..
  • Lengths over 8’ include a coupler to join the panels together. 8’ will be 2 4’ covers and a coupler, 9’ is 1 4’ and 1 5’ cover and a coupler.
  • 10’ is 2 5’ covers and a coupler, 11’ is 1 5’ and 1 6’ and a coupler.
  • 13’ is 1 6’ and 1 7’ and a coupler.
  • EZ Snap Covers have a lifetime warranty against rust. If they rust, send them back and we will replace them..
Check Stock