Top Barbed Roofing Nail Reviews

Roof Shingles Shingle Removal Tool Roofing Tools Pitch Hopper Shingle Nail Installer Roof Shingle Nail Puller Nail Remover Pry Bar For Safe Roof Shingles Replacement Roofing tools and Equipment

• 【Durable & Anti-rust Steel.】Our Roof Shingles Remover is made of hard steel material and the 2-in-1 design is more accurate, efficient and safer for quick installing or pulling nails on your roof shingles. With the rust proof and polished coating, our roofing tools will be your practical tool for shingle repairing and replacement..
• 【Nail-slot Design for Secure Grip.】With the unique nail groove design, you can inlay the nail and work in the narrow space smoothly. This Shingle Removal Tool will allow the roofing nails driven perpendicular to roof that bring longer lasting repairs without damaging the shingles with your hammer..
• 【Claw Tip for Nail Puller.】Our Shingle Nail Installer can easily pull out the nail from roofing shingles. Just drive the claw tip under the nail and twist, easily pull out the nail with less efforts that will definitely safe time and money..
• 【Easy to Use & Handy】This roof shingle nail installer is just handy to carry on with 1.1 inch in width and 11 inches in length, which make roofers work more accurate, efficient and safer. Our Roof Shingles are handy and fit for simple storage..
• 【A Must Have for All Roofers.】This shingles removal tool is a must-have for all roofers to remove or repair old or worn-....

Senco 8V0001N 1-3/4\ 15 Degree Angle Wire Coil Nailer, Red/Gray - 445Xp

• Drives 11 gauge (.120"), full round head roofing nails 3/4" 1-3/4" smooth shank..
• Tool-free adjustable depth of drive for consistent and controllable nail set.
• Adjustable nail canister accommodates entire range of true round-head roofing nails.

Roof Shingle Snake Tools, Shingle Removal Tool for Safe Roof Shingles Professional Roofing Tools and Equipment Shingle Nail Installer & Puller Pitch Hopper, Pry Bar Furnish Nail Puller Remover

• 【Directly and Fastly Replace】 The roof snake makes replacing composition shingles safer, easier, and more accurate than traditional methods..
• 【Nail Slot Design】 With the unique nail groove design, you can inlay the nail and work in the narrow space smoothly. Allow the roofing nails driven perpendicular to the roof which brings longer-lasting repairs without damaging the shingles with your hammer..
• 【Claw Tip Design】 Easily pull out the nail from the roofing shingles. Just drive the claw tip under the nail and twist, easily pulling out the nail with less effort..
• 【Caution on the Using】 When installing the new 3-tab shingles, do not bend or hit the surrounding shingles, and do not accidentally hit your fingers with the hammer during installation..
• 【Customer Service】 If you have any questions, please feel free to contact us. We will offer the most sincere and high-quality after-sales service for you..

1-3/4\ - Copper Roofing/Slating nails - 100% Pure Copper nails (100)

Roofing Stripper, Roofing Remover, Roofing Mutt

• *Heavy duty Roofing Remover *Removes all types of roofing & flooring materials *Notched sharpen teeth *Unique Notch with Nail Puller *Easy maintenance -resharpen by hand filing only.

PacTool RS501 Roof Snake Tool - Shingle Pry Bar - Heavy Duty Nail Remover Tool - Roof Shingle Remover - Professional Roofing Tools

• COMMERCIAL CROWBAR: Replace old and worn-out composition roofing shingles in no time with our practical pry tool. Our roof snake makes removing and applying new shingles more accurate, efficient, and safer than traditional replacement methods..
• ROOFING TOOLS AND EQUIPMENT: Never damage your roof again with this convenient pocket pry bar. Install new 3-tab shingles without bending or hitting surrounding shingles or accidentally striking your fingers with your hammer in the process..
• HAND TOOLS: A must-have for all roofers, this tool is forged from high-strength steel and has a patented offset nail slot feature allowing you to align nails with the correct one-inch offset from the bottom edge of your current course..
• NAIL PULLER TOOL: There is no need for a flat bar with this handy claw tip, Easily loosen and remove old, damaged shingles and nails by driving the claw end under the nail, rolling the nail out, and twisting the roof snake..
• PACTOOL: Trusted for decades, we are the leaders in specialized construction, renovation, and remodeling designs. Our cutting-edge product line inspires craftspeople and DIYers to work smarter, measure better, and repair more efficiently..

Dubbs Hardware - 1.5 Inch Copper Nails Roofing Finish - Solid Pure Copper Slate Spikes Flashing Furniture Boat - Package Includes 10 oz of The Highest Quality Nails

• PURE COPPER NAILS - Pure copper 1.5 inch roofing nails with a 3/8" head.
• ROOFING NAILS - Great for roofing, boat building, or any other decorative projects.
• INSTALLATION - To ensure no bending when hammering in, drill a 3/32" pilot hole for best results.
• PACKAGE INCLUDES - Approximately 100 nails per 10 ounce pack of premium copper nail.
• USA MADE - Proudly Made in the United States.

Metabo HPT 1-3/4 Inch Full Round Head Wire Collated Roofing Nails | 7,200 Count | 12113HPT

• TYPE: Full Round Head Electro Galvanized Smooth Shank High Wire Collated Roofing Nails.
• APPLICATION: Nail provides excellent holding power for installation of asphalt roofing shingles and insulation boards.
• TREATMENT: Electro Galvanized, coats the nails with a layer of zinc, for greater rust resistance.
• COMPATIBILITY: Compatible with the Metabo HPT NV45AB2.

Carpenter Air Tools CCN45 7/8\ To 1 3/4\ 15° Pneumatic Coil Roofing Nailer

• The CCN45 drives 15° wire Collated roofing nails from 7/8 to 1-3/4 in length..
• Contact firing mode for convenience and speed enabling smooth uninterrupted operation..
• Ergonomic molded rubber grip ensures the tool fits comfortably in your hand reducing fatigue..
• Durable and lightweight heat-treated aluminum housing for years of solid performance..
• Holds a full coil of 120 roofing nails limiting the need for constant reloading and the tool free depth adjustment will help to make sure every nail is set perfectly..

IVY Classic 15456 Solid Steel Shingler’s Hatchet Hammer with Vibration Cushioned Rubber Handle

• VERSATILE ROOFING HAMMER: Hammer features a 3 hole gauge for measuring 4-1/2", 5", and 14.3 cm (U.S. standard and metric shingle measurements), a blade for trimming roofing felt and asphalt shingles, and a nail slot.
• ONE PIECE, SOLID STEEL CONSTRUCTION: For strength and durability.
• DROp FORGED: Drop-forged steel with polished, milled face and cutting edge.
• VIBRATION CUSHIONED: Vibration from the hammer is absorbed through the shaft into co-molded contoured rubber handle.
• SPECIFICATIONS: Cutting Edge: 1-7/8", Length: 13".

BHTOP CN45N Roofing Nailer, 15 Degree Roofing Nail Gun, 3/4-Inch to 1-3/4-Inch Coil Nails, 120-pcs Load Capacity Coil Nailer in Orange

• 【Professional Nailer】Professional grade roofing nail gun designed with moving cylinder engine for low recoil. Compatible with 15 degree wire collated roofing nails from 3/4" to 1-3/4".
• 【Widely Use】Ideal for a range of materials and applications and satisfies your different need in nailing. Perfect for applications such as asphalt and cedar shingles, roof and wall sheathing, wood crate assembly, flooring underlayment, siding installation, and fences..
• 【Humanized Design】Steel contact safety with dual carbide inserts for less wear. Soft grip for comfort and control. Delivers the power to consistently drive nails in the toughest applications..
• 【Big loading capacity】Big loading capacity (120PCS) magazine will fasten a full bundle of shingles without reloading. Nails load from the side fast and easy.
• 【Special Improvement】Magnetic nail holder aligns the nails when loading and ensures jam-free firing. Tool-less depth of drive adjustment for precision nailing/flush driving.

BHTOP CN45N Roofing Nailer, 15 Degree Roofing Nail Gun, 3/4-Inch to 1-3/4-Inch Coil Nails, 120-pcs Load Capacity Coil Nailer in Blue

• 【Professional Nailer】Professional grade roofing nail gun designed with moving cylinder engine for low recoil. Compatible with 15 degree wire collated roofing nails from 3/4" to 1-3/4".
• 【Widely Use】Ideal for a range of materials and applications and satisfies your different need in nailing. Perfect for applications such as asphalt and cedar shingles, roof and wall sheathing, wood crate assembly, flooring underlayment, siding installation, and fences..
• 【Humanized Design】Steel contact safety with dual carbide inserts for less wear. Soft grip for comfort and control. Delivers the power to consistently drive nails in the toughest applications..
• 【Big loading capacity】Big loading capacity (120PCS) magazine will fasten a full bundle of shingles without reloading. Nails load from the side fast and easy.
• 【Special Improvement】Magnetic nail holder aligns the nails when loading and ensures jam-free firing. Tool-less depth of drive adjustment for precision nailing/flush driving.

Pneu-Tools CN45H 1-3/4in. Classic Coil Roofing Nailer

• This classic roofing nailer is everything you expect, with a few extra surprises.
• While other companies are cutting corners to make a fast dollar, we've gone the extra mile to make sure this tool will last for generations.
• Of course, if a tool is going to last a long time, then it should have some great features too, right? That is why this tool is upgraded.
• Premium one-step, quick-open magazine to reduce reload times. Smooth-as-butter drive depth adjustment for precision control.
• This shoots a 15° wire collated coil roofing nail. Fast single mode trigger and optimized recoil balance.