Top Barbed Pipe Plugs Reviews

Mudder 100 Pieces 1/4 Inch Straight Barbed Connectors Fitting Drip Irrigation Barbed Coupling Single Barbed Connector for Irrigation Tubing System and Garden

Wide range of applications: drip irrigation single barbed connector works well in connecting 2 sections of 1/4 inch mm tubing to direct water to another location, which can be applied for drip irrigation tubing system, flower beds, vegetable gardens, herbs gardens.
How to install: just easily install the barbed coupling fitting by push the tubing firmly over the barbed part for a tight fit, not easy to fall off, which has strong holding power with barbed ends, making the connection more firm.
No need for glues or tools: after fully inserting straight barbed connectors at the ends of the water pipe, you don't have to use any glue, tools, or clamps to fix the drippers or nozzles, garden work can be much easier and more relaxing.
Long term to use: made of quality plastic, this drip irrigation barbed coupling is water and rust resistant, not easy to fade or deform, sturdy and durable to use, which can work as practical fitting for your drip irrigation tubing system for a long time.
Sufficient quantity: 1 package comes with 100 pieces of 1/4 inch single barbed connectors, sufficient quantity to use or take as backup, sharing some with close people in your life will also be nice, they are practical fittings for tubing.

Check Stock

Raindrip R280DT BLK 1/4-Inch by 50-Foot Black Drip-A-Long with Fittings

Slowly waters the soil around your plants for complete root zone hydration.
the dripline emits water along the entire line.
Ideal for short runs on flat surfaces, such as vegetable gardens, flower beds, planter boxes, and plant rows.
Dripline can be cut to size and sections connect together with the included ¼ in. barbed fittings.
Flow rate may vary along the length of dripline with higher flow closer to the water source.
Use with a ¾ in. FHT X ¼ in. adapter to connect to water source.
Connects with included ¾ in. FHT X ¼ in. Adapter.
layout dripline next to plants to be watered.
½ GPH non pressure-compensating emitters are spaced 12 in. apart.
turbulent flow design flushes out sediments which can potentially clog emitters.
Flexible tubing bends to accommodate curved irrigation areas as well as handle straight runs.
Kit includes: 50 ft. of ¼ in. Dripline preassembled with ½ GPH drippers.
5 barbed tees, 5 barbed elbows, 5 barbed couplings and 5 end plugs.

Check Stock

Brass 1/4 Barb X 1/4 NPT Male End Air Hose Pipe Fitting Threaded Connector Adapter Pack of 12

✅ Function -- Barb head for connecting hoses, NPT end used to connect NPT pipes. Air hose pipe can apply to water, gas, oil and fuel as well as air tools..
✅ Premium material -- Brass barbed hose fitting is made of high quality solid brass, firm and durable, providing high resistance to abrasion and corrosion. Solid brass hose barb can withstand up to 100 °C (212 °F)..
✅ Durable -- Air hose fittings is not a cast product and has a thick wall, providing a longer service life than iron and iron galvanized pipe fittings..
✅ Superior threads -- Deeper and smoother threads with barbed edges provide effective connection..
✅ CUSTOMER SERVICE -- Professional factories produce brass air line fittings. Every detail reflects a strong texture performance. Fast Delivery and 30 Days Free Refund..

Check Stock

PVC Barbed Tee Fitting - 3/4 PVC Tee Barb Fitting - 3/4 Inch Barbed Insert Tee - Hose Barb Fittings for Tubing Hose Water Line - SCH 40 Barbed Hose Tee Fitting – Barbed Tee PVC Fitting

TOP QUALITY: The water line barbed fitting tees are carefully manufactured under strict quality guidelines and in full compliance with ASTM. Only the highest-grade PVC materials are used offering you the best durability.
MEASUREMENTS: 3/4 Inch barbed Insert x 3/4 Inch barbed Insert x 3/4 Inch barbed Insert barbed tee. Pipe Fitting Class is Sch 40 with Max. Temp of 140 F. Max Pressure 200 psi @ 72 Degrees F. Tee Fitting Connection Type is Insert x Insert x Insert.
WIDE APPLICATION: PVC Barb Tee Fitting can be used for running water lines as flexible tube and hose fittings at home, RV or any commercial plumbing systems.
EASY TO INSTALL: PVC tee hose fittings are lightweight and require no professional knowledge. The fitting process is simple and effortless. PVC can be cut, shaped, welded and joined easily.
MADE IN USA: Our PVC hose connectors are produced in US and have clear environmental advantages over traditional materials - 100% recyclable with increased wear resistance.

Check Stock

Mechanical Test, Seal & Cleanout Pipe Plug, 3 9/16" to 4 1/8" Winterizing Pool Plug, Anti-Return Pipeline Plugging, Expandable Rubber Stainless Steel Marine Boat Drain Plug T-Handle

【Convenient, Practical & Leakproof Plugs】The BOPOREAE T-Handle Drain Plug is a twist/turn pipe plug for a leak proof seal. The Premium Stainless Steel and Nitrile Butadiene Rubber (NBR) construction makes this rubber hole plugs resists heat, anti-freeze, oil and rust inhibitors, wear-resistant, wet-dry versatile and airtight.
【What Is This Plug Used For?】This Universal Rubber Expansion Plug is an Adjustable Stainless Steel Scupper Plugs which can replace any standard 1" to 4 1/8""(25-105mm) test and seal plug for various Drainage Hole&Pipe Opening.
Round rubber pipe plugs can be used for Low Pressure & Leakage Test, Drain Pipe Sealing & Clean-Outs for Kitchen, Bathroom, Garden, Automotive, Construction Industry, Kayak and Marine Boats, etc..
【How To Use?】The BOPOREAE pipe hole plug seal installs easily, no tool required. Turn the handle clockwise the rubber will be squeezed and expanded until the hole is clamped forming a leak-proof seal.
Turn the handle counterclockwise the rubber plugs returns for easy removal and next installation.
You will love this premium practical and convenie....

Check Stock

Spears 1429 Series PVC Tube Fitting Coupling Schedule 40 Gray 1-1/2 x 1 Barbed

Fitting connects to schedule 40 PE pipe on both ends.
PVC for strength and resistance to reactions with acids, gasoline, alcohol, and hydrocarbons.
Barbed fitting creates a tight seal on flexible pipe when used with a hose clamp (sold separately).
Meets ASTM D 2609 standards for plastic insert fittings and certified by NSF for use with potable water.

Check Stock

Spears 1429 Series PVC Tube Fitting Coupling Schedule 40 Gray 3/4 x 1/2 Barbed

Fitting connects to schedule 40 PE pipe on both ends.
PVC for strength and resistance to reactions with acids, gasoline, alcohol, and hydrocarbons.
Barbed fitting creates a tight seal on flexible pipe when used with a hose clamp (sold separately).
Meets ASTM D 2609 standards for plastic insert fittings and certified by NSF for use with potable water.

Check Stock

Oatey 33402 Mechanical Test Plug, 3 in, 5 Psi Back, Plastic, 110 Deg F, 3-Inch, Red

End of Pipe Gripper plugs are made with ABS glass-reinforced plates for added strength.
Extra large zinc wing nut for ease of tightening, no wrench required, and will not rust.
Natural rubber O-ring for excellent expansion and memory.
Plug is rated for 17 PSI or 40-ft of head pressure.
End-of-pipe seals only at the end of a pipe, preventing plug from falling into stack.
Galvanized carriage bolt to prevent corrosion.
Galvanized mechanical plugs have a wide usage range making them effective on most piping material.
Maximum allowed air is 5 PSIG on plastic and 2 PSIG on galvanized.
Plastic mechanical plugs are premium plugs designed to hold higher pressures.

Check Stock

MILL MAX 310-43-120-41-001000 SIP SOCKET, 20POS, THROUGH HOLE (50 pieces)

WALL PLUGS FOR SCREWS: Talon's range of wall plugs is suitable for domestic and trade customers, featuring the essential DIY tools for your tool bag for easy fittings without causing damage. Talon's Wall Plugs, available in three distinct colours and sizes, are a must for your tool chest - they are designed to enable smooth fitting screws in new home improvement and trade work..
STRONG PLASTIC WALL PLUGS: Manufactured using strong and secure polypropylene - a virgin grade polymer - Talon's Wall Plugs are designed to last. Screws alone are unlikely to stay in place when used in plasterboard, but are shown to be much strong and longer lasting when coupled with quality wall plugs. Keeping wall plugs to hand during your DIY jobs is sure to keep it simple and easy!.
ESSENTIAL DIY FITTINGS: Talon's Wall Plugs feature protruding fins to restrict rotation when inserted into drilled holes, which provides security to your fittings. Perfect to keep in tools sets and electricians tools kit, for when those multi jobs arise, our Wall Plugs are designed to expand two ways in order to reduce pull-out and ultimate damage to your walls. Includes 5x 20 wall plug strips..
EXPLORE THE FULL RANGE: The Talon Wall Plugs are also available in a range of different sizes for diff....

Check Stock

Rain Bird MANIFRE6S Drip Irrigation 6-Port Manifold, Unregulated Free Flow

Connects up to six 1/4″ Drip irrigation tubes to a 1/2″ riser.
Non-Regulated free flow for use with pressure regulated water source.
Barbed outlets accepts all brands of 1/4″ Drip irrigation tubing.
1/2″ female pipe thread bottom attaches to 1/2″ male pipe threaded risers.

Check Stock

Furnigear Plastic Plugs Tubing End Caps Chair End Caps 3/4” Inner Size Tubing Caps Round Furniture Sliders Glides Black(40pack)

❤Furnigear 3/4” Black Plastic Plugs End Caps (40pcs), perfect fit for 3/4” (0.68-0.75”) inner size of pipe tubing. Outside diameter is 0.78”. Warm tips: Please measure your chair leg (inner size) and choose correct size..
❤Plastic Plugs for Use in Plugging Holes: Plastic hole plugs fit for stainless steel pipe, aluminum, metal and other tubular poles. Chair end caps keep sharp parts from being exposed, scratch the floor or accidentally injure your family..
❤Chair Leg Caps Fit for Homemade and Outdoor Projects. Best chair glide for your kitchen stool legs, barstool chairs, fence post caps. Replacement for patio furniture leg protectors, stainless steel railing pipe, other tubular or any round opening..
❤Easy to Install: Plastic plugs insert snapped right into tube or hammer plugs in. Installs easily and securely. Lasting protection and prevents scratching of your floor surface and protects your expensive furniture when furniture is moved..
❤40 Pack 3/4″ Round Plastic Tubing end caps made by high quality plastic material and no odor smells，4.5mm thicken bottom, durable chair glide. Best furniture slider for carpet, moving easily. Chair leg inserts for metal legs, keeping securely..

Check Stock

300Pcs Barbed Connectors Irrigation Fittings Kit HOINCO Drip Irrigation Barbed Connectors for 1/4 Inch Tube for Flower Pot Garden Lawn Elbows End Plug Straight Barbs Tees 4-Way Coupling

【Barbed Connectors Irrigation Fittings Kit】：300Pcs irrigation kits total, including 100Pcs straight barbs, 80Pcs tees, 40Pcs oblique barbed elbows fittings, 40Pcs end plug, 40Pcs 4-way coupling. Drip irrigation connectors can save the water needed for irrigation in an efficient way and easily pass water to anywhere, bringing more convenience for your life..
【Drip Irrigation Barbed Connectors 】：Drip irrigation barbed connectors are made of high-strength plastic, which has a long service life and is not easy to fold and deform. The sufficient quantity is enough for your daily use and replacement..
【Suitable Size】：These irrigation kits are designed with barbs and can be used to connect 1/4 inch drip irrigation pipes. (Suitable for 4mm ID 7mm OD tube). Our drip irrigation accessories help to build a practical and useful irrigation system. Please check the size carefully before purchasing..
【Easy to Install】：Directly insert the irrigation fittings kit at the end of the pipe, without tools or glue, making gardening more convenient and efficiently. If convenient, you can also use a heat gun or hair dryer to soften the end of the tubing before inserting..
【Wide Applications】：Suitable for gardens, patio, lawn, flower beds, terra....

Check Stock

Spears 1435 Series PVC Tube Fitting, Adapter, Schedule 40, Gray, 2" Barbed x NPT Female

Adapter for connecting pipes or fittings of different types.
Fitting connects to schedule 40 PE pipe on one end and has an NPT female connector on the other.
PVC for strength and resistance to reactions with acids, gasoline, alcohol, and hydrocarbons.
Barbed fitting creates a tight seal on flexible pipe when used with a hose clamp (sold separately).
Meets ASTM D 2609 standards for plastic insert fittings and certified by NSF for use with potable water.

Check Stock