Top Barb Straight Connectors Reviews

JoyTube Brass Hose Barb Fitting Metals Splicer Mender 1/4 Barb Hose Union Fuel Gas Water Air Pack of 12

• Connections: 1/4” to 1/4”. Our hose barb fitting is long enough,which make sure it can insert hose but not easy to be apart. Our barb union will provide good seal when you use it to connect hose..
• Application of our barb splicer is very wide, such as Temperature control circuits, pneumatic circuits, vacuum and fluid systems test apparatus, lubricant, coolant lines.(Air/Water/Fuel/Boat/Gas) ..
• Connects to a hose on both ends. Union coupling for connecting two hoses with the same diameter in a straight run..
• Brass barb union for corrosion resistance, ductility at high temperatures, and low magnetic permeability..
• The barbed stems create better tight seal on flexible and semi-rigid hose when used with a hose clamp or crimp sleeve or ferrule (not include)..

Whitecap Industries S-3801C Stainless Steel/Nylon Thru-Hull with Barb - 3/4\ Hose Size, Straight

2 Pack Brass Hose Fitting Adapter 3/8 Barb x 1/4 NPT Male Pipe

• Standard 1/4 npt to 3/8 barb for connecting a hose to a male threaded connection of a different diameter..
• Brass material make it strongest construction for prolonged service life,Easy to use and reliable..
• Hose barb on one end and male NPT threads on the other, no leaking and durable, easy to connect and disconnect..
• Barbed fitting for a tight seal on hoses and NPT threads for a tighter seal than straight threads..
• Package include 2 Pack 3/8" Hose ID x 1/4" NPT Male Pipe brass fittings..

Minimprover 4PCS 1/4 ID Hose Barb Thru-Bulk Head Hex Union Brass Straight Fitting with Flat Washer Gasket Water/Fuel/Air

• ★ 【Material】: Solid Brass construction. Durable Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability..
• ★ 【SIZE】: 1/4" Hose Barb x 1/4" Hose Barb.Thru-Bulk Bulkhead Fittings is connect with 1/4" ID hose with the same size..
• ★ 【Introduction】: Smooth surface and inner wall, durable Light and Small. Exquisite craftsman makes it safe and reliable.Bulkhead union coupling for connecting two hoses with the same diameter in a straight run.Barbed fitting for a tight seal on hoses..
• ★ 【Applications】: The fittings are fixed with 2 Gaskets and 1 fixed six corner, 1 movable six corner nuts form bulkhead tank function.Wide range of use: suitable for applications in water,fuel,air and etc..
• ★ 【Package Include】: 4 Pack 1/4" to 1/4" hose barb.It comes with 1 year warranty..

USA SEALING ZUSA-TF-QD-A-15 Acetal Quick Disconnect Tube Fittings Straight: 1/8\ Plug, 1/4\ Hose Barb, Silver

Legines 1/4 NPT Male to 3/8 Barb Fitting Brass Barbed Adapter Straight Connector 2 pcs

• Barb adapter for connecting a 3/8" hose to a 1/4" npt male threaded connection of a different diameter.
• Hose barb on one end and male NPT threads on the other.
• Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability.
• Barbed fitting for a tight seal on hoses and NPT threads for a tighter seal than straight threads.
• These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories..

HIBLOW HP-200 Pond Aerator/ Septic Linear Air Pump

• Premium quality and longevity. Quiet, energy efficient, oil/ lubrication free, outdoor UL rated.
• Aeration for ponds up to 2 acres at 10' or less in depth. Helps keep water clean and clear. Promotes healthy oxygen levels for fish to thrive and grow. Circulates water - evenly distributing oxygen and water temperature..
• Can be rebuilt 2 times for the fraction of the cost of a new aerator. See HIBLOW's website - support page for a video tutorial.
• Hose connector included: 5/8" ID to 1" ID Straight Stepped Hose with clamp. Barb fitting size 1" OD (barb not included).
• Aeration tubing recommendations: Distances between 50-100' use 1/2" ID tubing. 100'+ use 3/4" ID tubing.
• Use a medium bubble diffuser (3mm-5mm) for best results and aerator life.

Legines Brass Hose Barb Fittings Assortment Kits Splicer + Male Coupler + 90 degree Male Elbow 65 Pcs

• Splicer : 3/16"(5) 1/4"(5) 5/16"(5) 3/8"(5) 1/2"(5).
• 90 Degree Male Elbow: 1/4" barb to 1/8" MNPT (2) 1/4" barb to 1/4" MNPT (2) 5/16" barb to 1/4" MNPT(4) 3/8" barb to 1/4" MNPT(4) 3/8" barb to 3/8" MNP(2) 1/2" barb to 3/8" MNPT(2).
• Male Coupler: 3/16" barb to 1/8" MNPT(2) 1/4" barb to 1/8" MNPT (2) 1/4" barb to 1/4" MNPT (2) 5/16" barb to 1/4" MNPT (4) 5/16" barb to 3/8" MNPT (4) 3/8" barb to 1/4" MNPT(4) 3/8" barb to 3/8" MNPT(2) 1/2" barb to 3/8" MNPT(2) 1/2" barb to 1/2" MNPT(2).

Straight Push Connectors, 80 Pieces 6/8/10/12mm Quick Release Pneumatic Connectors Air Line Fittings for 1/4 5/16 3/8 1/2 Tube (20pcs Each Size)

• 【Package Includes】- This straight push connectors set includes 80pcs straight push connectors, there are four sizes and they are 6mm, 8mm, 10mm, 12mm, they are suitable for 1/4", 5/16", 3/8", 1/2" tube and pipe..
• 【High-quality Material】- Connectors' body are made of Plastic/PE, and there are stainless steel locking claws and NBR O-rings. Once applied, no worries or danger of tubing coming loose..
• 【360° Rotation】- Straight push connectors the plastic tube can rotate 360 degrees even after installation, they are simple and flexible, and they can meet various requirements of piping..
• 【Easy Installation】- The release ring adopts an elliptical design, which makes mounting and disconnection easier and more convenient..
• 【Wide Application】- Quick release pneumatic connectors are widely used in industries automatic production equipment like machinery, electronics, automobile, packaging and medical..

Five Oceans FO4281 Reinforced EPA/CARB Fuel Line with Primer Bulb for OMC, Johnson & Evinrude, 6 Feet x 3/8 inches Hose, Compatible with Ethanol Blended Fuels

• Compatible with OMC, Johnson, and Evinrude engines and tank connectors.
• 3/8 inches hose with a 6 feet long line. Includes (2) OMC, Johnson, and Evinrude female barb connectors.
• Premium primer bulb with a 3/8 inches OMC, Johnson and Evinrude Hose Connector.
• Compatible with ethanol blended fuels & pre-assembled using low permeation fuel line and bulb.
• Exceeds fuel flow requirements for OMC outboards. Meets current Environmental Protection Agency (EPA) & CARB regulations . FIVE OCEANS, 40 YEARS developing High-Quality Marine & Outdoor Products.

Hardkits 69 pcs Brass Hose Barb Fittings Assortment Kits 1/8 3/16 1/4 5/16 3/8 1/2 Barb Splicer & Barb To Male Coupler & Tee

• 【PACKAGE INCLUDES】 -----This Barb Fittings Assortment contains Splicer 3/16"(5) 1/4"(5) 5/16"(5) 3/8"(5) 1/2"(5) ，Barb Tee:1/8"(2) 3/16"(2) 1/4"(2) 5/16"(2) 3/8"(2) 1/2"(2).
• 【PACKAGE INCLUDES】 ----- This npt barb kits contains Male Coupler: 3/16" barb to 1/8" MNPT(2) 1/4" barb to 1/8" MNPT (2) 1/4" barb to 1/4" MNPT (2) 5/16" barb to 1/4" MNPT (4) 5/16" barb to 3/8" MNPT (4) 3/8" barb to 1/4" MNPT(4) 3/8" barb to 3/8" MNPT(2) 1/2" barb to 3/8" MNPT(2) 1/2" barb to 1/2" MNPT(2) &304 stainless steel clamp rings 8 pcs.
• 【CREATE A GOOD SEALING】 ----- NPT barb assortmentUse these hose barb fittings and clamp rings to efficiently connect the flexible tubing or hose. This assorted brass barbed fittings set would allow you to maintain a tight seal..
• 【WIDE APPLICATIONS】 ----- This brass crimp fitting are essential component to prevent leakage of oil, gas, fluid and fuel. Great for industrial use, automotive, aquarium, marine and much more..
• 【HIGH QUALITY】Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability，Temperatures range from -40 to 260 F..

Plastic Hose Barb Fitting Hose Fitting Adapter for Air Water Fuel 3/16 x 3/16 1/4 x 1/4 3/8 x 3/8 1/2 x 1/2 5/8 x 5/8 8Pcs

• 【Package Included】 8 pieces Plastic barb connector in total, including 2pcs 3/16" x 3/16", 2pcs 1/2" x 1/2", 2pcs 5/8" x 5/8", 1pcs 1/4" x 1/4", 1pcs 3/8" x 3/8".
• 【Material】 Barbed hose fittings made of 100% PP polypropylene plastic that is durable, strong, water resistant, chemical-resistant materials to assure long life.
• 【Working Temperature & Pressure】 The plastic hose fittings temperature range from -9 °F to 175 °F, but hose splicer is not resistant to oil.
• 【Easy Installation】 Barb hose easy to install without glue, or other tools required. Barbed ends grab 5/8" tubing tightly that won't leak.
• If necessary, you can use a heat gun or blower to soften the end of the tube before inserting it, after cooling, the tube will remain tight.
• 【Wide Application】 Pipe connectors Suitable for applications in pharmaceutical, food and beverage, laboratory, chemical processing and others.

Hose Barb Fitting Plastic Barb Joint Splicer Mender Adapter Union for Pipe Air Line,5/32 x5/32 ,3/16 x3/16 ,7/32 x7/32 ,1/4 x1/4 ,5/16 x5/16 ,3/8 x3/8 ,7/16 x7/16 ,1/2 x1/2 ,5/8 x5/8 ,3/4 x3/4 ,50Pcs

• 【Package Included】 50 pieces Plastic barb connectors in total, including 5pcs 5/32"x5/32", 5pcs 3/16"x3/16", 5pcs 7/32"x7/32", 5pcs 1/4"x1/4", 5pcs 5/16"x5/16", 5pcs 3/8"x3/8", 5pcs 7/16"x7/16", 5pcs 1/2"x1/2", 5pcs 5/8"x5/8", 5pcs 3/4"x3/4".Almost all sizes are included to meet different diameter pipes..
• 【Material】The 3/4"x3/4" barbed hose fittings are made of milky white PE (polyethylene) plastic, and the others are made of PP polypropylene plastic, they are durable, strong, water resistant, chemical-resistant materials to assure long life..
• 【Working Temperature & Pressure】 1. Translucent PP (polypropylene) temperature range: -22 °F to 284 °F. It is resistant to corrosion by acid, alkali, salt solution and various organic solvents below 176 °F, and can be decomposed under high temperature and oxidation. The melting point is 329 °F, and it softens at about 311 °F. 2. Milky white PE (polyethylene) temperature range: -76 °F to 197.6 °F. Melting point is 233.6°F..
• 【Easy Installation】 Barb hose is easy to install without glue, or other tools required. Barbed ends grab the tubing tightly that won't leak.
• If necessary, you can use a heat gun or blower to soften the end of the tube before inserting it, after cooling, the tube will ....