Top Barb Adapter Reviews

ECO-FLO PRODUCTS INCORPORATED 125 1-1/4' x 24' Sump Pump Discharge Hose Kit

Fits on any sump pumpwith1-1/4" or 1-1/2" adapters (included).
Can also be used with a utility pump with a 1-1/4 inch insert adapter.
Connecting two or more hoses together you will need a 1-1/4 inch insert (barb) x 1-1/4 inch insert (barb).

Adapter for connecting pipes or fittings of different types.
Barbed fitting for a tight seal on hoses when used with a hose clamp (not included).
For use with rubber hoses: Barb: 1" Barb For Rubber, Plastic, TPU, or other hose.
Fits: 1.5" Tri Clamp / Clover / Sanitary Fitting.

...ng use. DO NOT make a sealed connection with a garden hose directly to tank, this is a pressurized connection and will cause tank to explode causing damage. For filling tank it is recommended to use a fill dish or other gravity process..
BASIC PLUMBING KIT INCLUDES - (TWO) 0.5” Hose Barb to 0.5” Male Pipe Thread Adapter (FOUR) 0.5” Hose Clamp (ONE) 1.25” Hose Barb to 1.5” Male Pipe Thread Adapter (TWO) 1.5” Hose Clamps (ONE) 1.5” Male Pipe Thread PVC Male Adapter (ONE) 5ft. Section of 0.5” ID Vent/Draw Hose (ONE) 5ft. Section of 1.25” ID (1.375” OD) Fill Hose.

Material: Brass. Connections: 1/2" x 3/8".
Adapter for connecting a hose to a hose threaded connection of a different diameter.
Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability.

Adapter for connecting a hose to a hose threaded connection of a different diameter..
Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability..

Adapter for connecting pipes or fittings of different types.
Barbed fitting for a tight seal on hoses when used with a hose clamp (not included).
For use with rubber hoses: Barb: 1/2" Barb For Rubber, Plastic, TPU, or other hose.
Fits: 1.5" Tri Clamp / Clover / Sanitary Fitting.

Package: Garden spigot kit includes PVC ball valve x 1 and PVC bulkhead fitting adapter x 1 and PVC threaded connector x 1 and garden hose adapter barb(12.7mm(1/2") OD) x 1 with stainless steel pipe clamp x 2 and thread seal tape x 1.
High Quality: PVC, durable, non-toxic, unleaded,resists cracking and peeling, good for all seasons.Full port, fast and easy to empty your rain barrel water into a watering..
Specifications: 1/2 inch ball valve, 1/2"(12.7mm) OD Barb Hose Adapter(for 12mm ID Hose), Perfect connect your Rain Barrel and Hose.
Easy to Install: Drill a hole to install bulkhead fitting adapter, Thick durable silicone seal gasket seal the water tight and long-lasting..
Widely Application: Suitable for water bucket, aquariums, reef tank, irrigation, swimming pools, water parks.they are good tool that can be used in many places..

Adapter for connecting pipes or fittings of different types.
Barbed fitting for a tight seal on hoses when used with a hose clamp (not included).
For use with rubber hoses: Barb: 1" Barb For Rubber, Plastic, TPU, or other hose.
Fits: 1.5" Tri Clamp / Clover / Sanitary Fitting.

Barb adapter for connecting a 3/8" hose to a 1/4" npt male threaded connection of a different diameter.
Hose barb on one end and male NPT threads on the other.
Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability.
Barbed fitting for a tight seal on hoses and NPT threads for a tighter seal than straight threads.
These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories..

APPLICATION.The adapter’s barbed fitting creates a tight seal on flexible PE pipe when used with a hose clamp (sold separately)..
ADVANTAGE.An O-ring is delivered to the end of each joint thread, eliminating the need for a sealant or raw tape.
HIGH QUALITY MATERIAL. made of PVC ,have Alkali resistance, high temperature resistance, corrosion resistance, strong anti-aging, high strength, no break..
-30 degree to 100 degree F temperature range..
BARB HOSE FITTING.has a male National Pipe Thread (G) thread on one end and a barbed insert on the other.
Size: 16mm or 5/8″ Barb x 3/4″ G Male.

【3/4 Inch US Standard Faucet Adapter】These faucet adapters are made of eco-friendly plastic and are sturdy and durable. With Washers, it is tight and watertight..
【Barb Design and Lock Cap】The hose adapter connects the 1/4" tubing through the barb part, and locks the tubing through the lock cap part of the adapter, so there are two protections against falling off and leakage..
【Filter Accessories Prevent Clogging】The product is equipped with filter parts, which can intercept large particles of impurities in the water, effectively protect the nozzle and prevent clogging..
【American Standard 3/4" Thread】Female threaded fittings are American Standard 3/4" threads, suitable for 3/4" standard threads (3/4"GHT, 3/4"NH, 3/4"NPT), a wide range of Suitable for garden connectors such as outdoor faucets, hose diverters, garden filters, garden timers..
【Suitable for Many Kinds of 1/4 Inch Hose/Pipe】Suitable for many kinds of 1/4 inch pipe, suitable for 1/4 inch PE pipe, 1/4 inch (outer diameter: 7mm, inner diameter: 4mm) PVC dropper Irrigation Tube, 1/4" (OD: 6mm, ID: 4mm) PU tube..

Splicer : 3/16"(5) 1/4"(5) 5/16"(5) 3/8"(5) 1/2"(5).
90 Degree Male Elbow: 1/4" barb to 1/8" MNPT (2) 1/4" barb to 1/4" MNPT (2) 5/16" barb to 1/4" MNPT(4) 3/8" barb to 1/4" MNPT(4) 3/8" barb to 3/8" MNP(2) 1/2" barb to 3/8" MNPT(2).
Male Coupler: 3/16" barb to 1/8" MNPT(2) 1/4" barb to 1/8" MNPT (2) 1/4" barb to 1/4" MNPT (2) 5/16" barb to 1/4" MNPT (4) 5/16" barb to 3/8" MNPT (4) 3/8" barb to 1/4" MNPT(4) 3/8" barb to 3/8" MNPT(2) 1/2" barb to 3/8" MNPT(2) 1/2" barb to 1/2" MNPT(2).

Allows individual hot and cold lines to be connected directly to each fixture.
Creates a single point shutoff for all home fixtures.
Each manifold has an equal number of hot and cold outlets - Outlets are 1/2" PEX barb shut-off valves.
Inlet sizes are 1" MPT - Each manifold comes with a reducing adapter to 3/4" PEX barb.