Top Ball Valves And Fittings Reviews

75mm IBC Tote Tank Adapter Ball Valve, IBC tote valve, 2.95' Coarse Thread Tote IBC Ball Valve Connector Replacement for IBC Tote Water Liquid Container

  • 【WIDE USAGE】— 75mm IBC Tote Adapter is suitable for plastic container outlet control to prevent liquid from splashing around. Widely used in chemical process and acid, liquid storage buckets, tanks, container outlet control valves..
  • 【IBC TOTE ADAPTER】— This IBC tote tank adapter ball valve is made of high-density polyethylene and plastics, which is acid resistance, alkali resistance, corrosion resistance, high mechanical strength, and durable to use..
  • 【NO LEAK】— IBC tote fittings with inner diameter input end diameter 75mm, pitch: 0.19″ (5mm).
  • 60mm/2.36″ diameter for suitcase drain cover, liquid storage buckets, and tanks outlet control valves to prevent liquid leakage..
  • 【EASY TO INSTALL】— 2.95″ coarse thread tote ball valve is easy to install, just need to connect to the water tank to use, equipped with silicone gasket and raw material tape to enhance sealing..
  • 【PACKAGE INCLUDED】 — Purchase IBC tank drain adapter from Catilon, you can get 2.95’’ IBC adapter ball valve, IBC A200-S60*6(mm) + IBC tote valve cover + spout cap + silicone gasket (NOTE: Please carefully check the size of the IBC Tote Ball Valve before purchasing). Please confirm the thread diameter of your IBC tank adapter is 60mm..
Check Stock

MAXLINE COMPRESSED AIR TUBING MASTER KIT, 1' BENDABLE TUBING (M6580V, 300FT WITH SHUT OFF)

  • of 1-Inch Tubing, (3) Air Outlet Kits WITH SAFETY SHUT OFF BALL VALVES, (2) Tee Fittings, 1-Inch Straight Fitting, (30) Pipe Clips, Debar and Cutter Tool..
  • HIGHER FLOW RATE: This M6580V 1" Maxline 300FT Master Kit flows at 82 CFM at 300FT, versus the M7580 3/4" equivalent that flows at 39 CFM at 300FT..
  • 175 PSI Maximum working pressure, 1-Inch inside diameter x 1.2-Inch outside diameter..
  • Compression style nickel plated brass fittings. Use only with Maxline 1-Inch system..
  • Recommended on Industrial sized air compressors 7.5HP through 15HP..
Check Stock

Lisle 22920 8 mm Low Profile Jiffy-Tite Disconnect Tool

  • Disconnects quick connect push-in connectors found on heavy-duty truck air systems and more.
  • Smallest size also works on automatic adjusting air suspension systems for automobiles.
  • Disconnects air systems on brakes, suspension, steering, engine, transmission and other auxiliary equipment.
  • Also disconnects other quick connect push-in fittings, including: flow control valves, check valves, shuttle valves, quick exhaust valves and other function control fittings in compressed air systems.
  • Each tool is double-ended to disconnect air lines even in hard-to-reach areas, angled end allows maximum leverage, smaller end fits in tight spots.
  • Set comes with five popular sizes: 1/8"-5/32.
Check Stock

EKWB EK-Quantum Torque Drain Valve Black

  • EK-Quantum Torque Drain Valve is a premium fitting acting as a perfect draining point in your system.
  • It features a secure cap, in form of a Torque fitting compression ring, and it can even fit an aesthetic color ring for HDC 16 Torque fittings.
  • Smaller footprint, secure locking, and an easy open/close mechanism compared to traditional ball valves.
  • Made of CNC machined brass with a Satin Black finish..
Check Stock

WELDLESS BULKHEAD KIT for BREW KETTLE or WHISKEY STILL - STAINLESS STEEL 1/2\ NPT HOMEBREW EQUIPMENT

  • Fittings kit to mount 1/2" NPT Ball Valves to brew kettles or whiskey stills.
  • Works on Brew Kettles, Whiskey Stills, and Sparge water pots.
  • Just add teflon pipe tape to where the nut will be..
Check Stock

SharkBite 1 Inch Ball Valve, Push to Connect Brass Fitting, Water Shut Off, PEX Pipe, Copper, CPVC, PE-RT, HDPE, 22223-0000LFA

  • INSTALLS IN SECONDS: Requires no special tools, no soldering, no crimping or glue.
  • COPPER, PEX, CPVC, PE-RT: Brass SharkBite Ball Valve plumbing fittings fit Copper, plastic PEX tubing, CPVC and PE-RT Pipe and connects them in any combination.
  • PERFORMANCE: SharkBite shutoff valves are are heavy duty and certified to sustain a pressure of 200 PSI and 200 degrees Fahrenheit.
  • QUALITY: Only SharkBite's quality and performance is field-proven.
  • PREFERRED BY THE PRO: All SharkBite fittings meet the same standards for commercial and residential plumbing applications.
Check Stock

SharkBite 3/4 x 3/4 Inch Ball Valve with FNPT Connector, Push to Connect Brass Plumbing Fitting, PEX Pipe, Copper, CPVC, PE-RT, HDPE, 22186-0000LF

  • INSTALLS IN SECONDS: Requires no special tools, no soldering, no crimping or glue.
  • COPPER, PEX, CPVC, PE-RT: Brass SharkBite Ball Valve plumbing fittings fit Copper, plastic PEX tubing, CPVC and PE-RT Pipe and connects them in any combination.
  • PERFORMANCE: SharkBite shutoff valves are are heavy duty and certified to sustain a pressure of 200 PSI and 200 degrees Fahrenheit.
  • QUALITY: Only SharkBite's quality and performance is field-proven.
  • PREFERRED BY THE PRO: All SharkBite fittings meet the same standards for commercial and residential plumbing applications.
Check Stock

Wostore Flaring Swage Tool Kit for Copper Plastic Aluminum Pipe With Tubing Cutter & Ratchet Wrench

  • 【ALL IN ONE KIT】:The kit includes 1 flaring cone, 2 flaring bars, 5 swage fittings, 1 tubing cutter, 1 ratchet wrench and 1 storage case..
  • 【EXTENSIVE RANGE OF FLARE ADAPTERS】:Flaring tool apply to 1/8", 3/16", 1/4", 5/16", 3/8", 7/16", 1/2", 5/8", 3/4" O.D. tubing..
  • 【COMMON SWAGE FITTINGS】:Swage fittings are used to 3/16”, 1/4”, 5/16”, 3/8”, 1/2”, 5/8”,3/4" O.D. tubing, a rugged and durable flaring....
  • 【PRACTICAL TOOLS】:Tube cutter:1/8"-1-1/8" (3-28MM) Pipe, Ratchet wrench:3/16",1/4",5/16",3/8" for square valves, such as valves on hose bibs and....
  • 【DURABILITY AND ACCURACY】:This flaring kit swivel-type swaging adapters and flaring cone are made of the sturdiest steel and chromed for easy....
Check Stock

Ultimate Washer 18717 Pressure Washers Stainless Male Nipple, 3/8-Inch, 2-Pack, Replaces Legacy 89222220

  • 2 x STAINLESS STEEL 3/8″ Male Pipe Thread x 3/8″ Male Quick Connect Plug CHEMICAL RESISTANT for Long Life.
  • Withstands MAXIMUM PRESSURE up to 6000 PSI.
  • UNIVERSAL Fitting for most Gas Power Washers.
  • Fittings can be used to attach a pressure washer accessories to the water pumps, hose reels, ball valves, telescoping wands, surface cleaner or regular spray guns.
Check Stock

labwork Coolant Filtration Filter Kit Replacement for 2003-2007 Ford V8 6.0L Powerstroke Diesel

  • Replacement for 2004-2007 Ford E350 E450 Van V8 6.0l Powerstroke Diesel.
  • Replacement for 2003-2005 Ford Excursion V8 6.0l Powerstroke Diesel.
  • Replacement for 2003-2007 Ford F250 F350 F450 F550 Pickup V8 6.0l Powerstroke Diesel.
  • Warranty: 1 year warranty. If there is any problem after receiving, please contact us, and we must helps to solve it.
Check Stock

Lifynste Garden Hose Elbow Connector, 90 Degree Brass Garden Hose Elbow Adapter with Shut Off Valves

  • HIGH QUALITY MATERIAL: The brass hose elbow is made of 100% solid brass, durable, corrosion proof and has a long service time. Includeds 2 extra rubber washers included to prevent leaking..
  • ELIMINATE STRAIN: 90 degree garden hose elbow connector eliminates strain on hoses and water intake fittings, will extend the life of your garden hose by preventing twisting and straining..
  • CONVENIENCE: Standard 3/4 In. Our garden brass hose connector is designed to easily accommodate all standard hoses, equipped with high quality ball valves for easy and hassle free water flow..
  • THOUGHTFUL DESIGN: If your garden spigot is too close to the ground or wall, then our hose elbow connector is a must-have wonder. Perfect to change angle of conection, helps reduce unnecessary stress and strain on water intake hose fittings, easy to hook up water sprinkler timer, outdoor water faucet, great for garden, RV, lawn, etc..
  • PACKAGE INCLUDES: The 2 pack garden hose connectors comes with 2 pcs free rubber gaskets for replacement. TIPS: For outdoor use with cold water only. If for any reason you're not 100% SATISFIED, please let us know and our customer team will help you RETURN OR REFUND..
Check Stock

2 PCS Stainless Steel Ball Valves TWOZOZO Ball Valve Standard 60 Degree Female NPT Ball Valve with Raw Material Belts 1 Ball Valves

  • High Quality: TWOZOZO Stainless Steel Ball Valves Are Made Of High Quality Materials And Have Good Ductility To Effectively Avoid Cracking..
  • US Standard Threads: This Ball Valve Uses NPT 60 Degree Us Standard Threads, Please Fit Your Thread Diameter When Purchasing..
  • Wide Applications - Ball valves are widely used in mechanical equipment, industrial equipment, water supply and drainage equipment, for example in....
  • Easy To Use: Our Ball Valves Come With A Roll Of Raw Material, So You Don't Have To Re-purchase Them And You Can Install Our Ball Valves As Soon As....
  • High Performance - The internal passage of the drain tap is straight for optimum and complete passage and therefore has a low flow resistance. The....
Check Stock

Firestone W217602445 Ride-Rite Kit for Toyota Tundra

  • Levels vehicle front-to-rear and side-to-side , Fits 2007 to 2013 models.
  • Stabilizes vehicle while loaded and maximizes vehicles load carrying capacity.
  • Used on pick-ups, class A,B,C motorhomes, vans, commercial vehicles and SUV's.
  • Kit includes air springs, air line, fasteners, upper and lower brackets, inflation valves, push-to-connect air fittings and detailed instructions.
  • Levels vehicle front-to-rear and side-to-side , Fits 2007 to 2013 models..
  • Adjustability is between 5-100 Pascal per square inch.
Check Stock