Top Balanced Xlr Input Reviews

DISINO 1/4 Inch TRS to XLR Male Balanced Signal Interconnect Cable Quarter inch to XLR Patch Cable - 3.3 Feet

This Balanced XLR Cable is designed to convert a balanced 1/4" TRS output to a balanced XLR input. These cables are commonly used as speaker leads for active speakers, carrying the audio signal from the mixer to the speaker. They are also widely used as signal cables for stage and studio audio applications..
High strength aluminum alloy die-cast housing, Gold plated connections, 20 AWG Oxygen-free copper core to deliver pristine sound..
Constructed with multi-layers of shielding minimize signal interference and ensure the transmission stable,provides maximum cancellation of hum and noise..
The XLR connector is a high quality metal shielded type with positive locking into the microphone.
The heavy duty 6.35mm TRS connector has 360 degree easy-grip treads for frequent unplugging and durability..
XLR pin 1 is connected to the 1/4" plug sleeve, XLR pin 2 is connected to the 1/4" plug tip, XLR pin 3 is connected to the 1/4" plug ring, balanced audio cables utilize impedance balanced lines that reduce EM and RF noise and extend the effective range of the cable run..

Check Stock

Rockville RBG15FA 15 2400w Active Powered Pro Subwoofer Folded Horn PA/DJ Sub

Rockville RBG15FA 15" 2400W Pro Audio Folded Horn Active Powered Subwoofer..
600 Watts RMS / 1200 Watts Program / 2400 Watts Peak. 15" Woofer with 110oz Magnet and 4" Voice Coil..
Frequency Response: (+/-3dB) 30Hz - 120Hz. Maximum SPL @ 1w / 1m: 130dB Peak / 127dB Continuous..
Power-On and Signal Input LED Indicators. Signal Input LED Indicator. Clip Limiter Circuitry with LED Indicator..
Balanced XLR + TRS input jacks. Balanced XLR thru/output jacks for parallel connections..

Check Stock

Rockville REQ215 Dual 15 Band 1/3 Octave Graphic Equalizer with Sub-Output

The Rockville REQ215 is a Dual Channel 30 Band (15 bands per channel) rack mountable EQ. Dual channel (15 bands per channel). Switchable 12 Band or 6dB boost/cut range..
80Hz 24dB low cut filter. 2/3 octave filter sets. 25 Hz to 16 kHz effective equalization range. Constant Q filters. Output level LEDs (-12 to +17 dB). Low cut filter switch with status LED..
XLR inputs and outputs for balanced operation. Bypass switch with status LED. Balanced XLR input/output. Subwoofer out. Subwoofer X-Over Freq ( 30Hz - 200Hz ) selecting..
Connectors : XLR balanced inputs and outputs. Ground lift switch. Frequency Centers : 31.5 Hz, 40 Hz, 63 Hz, 100 Hz, 160 Hz, 250 Hz, 400 Hz, 500Hz, 630 Hz, 800 Hz, 1 kHz, 2 kHz, 4 kHz, 8 kHz, 16 kHz..
Input Impedance : 20k ohms. Output Impedance : 1.5k ohms. Maximum Output Level : 11 VAC. Level Control : +/- 12 dB. Signal to Noise : 90 dB. Distortion : 0.03%. Power : 120 Volt..

Check Stock

TISINO XLR Female to 1/4 Inch (6.35mm) TRS Jack Lead Balanced Signal Interconnect Cable XLR to Quarter inch Patch Cable - 15 Feet

This Balanced XLR Cable is designed to convert a balanced XLR output to a balanced 1/4" TRS input. These cables are commonly used as speaker leads for active speakers, carrying the audio signal from the mixer to the speaker. They are also widely used as signal cables for stage and studio audio applications..
High strength aluminum alloy die-cast housing, Gold plated connections, 20 AWG Oxygen-free copper core to deliver pristine sound..
Constructed with multi-layers of shielding minimize signal interference and ensure the transmission stable,provides maximum cancellation of hum and noise..
The XLR connector is a high quality metal shielded type with positive locking into the microphone.
The heavy duty 6.35mm TRS connector has 360 degree easy-grip treads for frequent unplugging and durability..
XLR pin 1 is connected to the 1/4" plug sleeve, XLR pin 2 is connected to the 1/4" plug tip, XLR pin 3 is connected to the 1/4" plug ring, balanced audio cables utilize impedance balanced lines that reduce EM and RF noise and extend the effective range of the cable run..

Check Stock

TISINO XLR Female to 1/4 Inch (6.35mm) TRS Jack Lead Balanced Signal Interconnect Cable XLR to Quarter inch Patch Cable - 3.3 Feet

This Balanced XLR Cable is designed to convert a balanced XLR output to a balanced 1/4" TRS input. These cables are commonly used as speaker leads for active speakers, carrying the audio signal from the mixer to the speaker. They are also widely used as signal cables for stage and studio audio applications..
High strength aluminum alloy die-cast housing, Gold plated connections, 20 AWG Oxygen-free copper core to deliver pristine sound..
Constructed with multi-layers of shielding minimize signal interference and ensure the transmission stable,provides maximum cancellation of hum and noise..
The XLR connector is a high quality metal shielded type with positive locking into the microphone.
The heavy duty 6.35mm TRS connector has 360 degree easy-grip treads for frequent unplugging and durability..
XLR pin 1 is connected to the 1/4" plug sleeve, XLR pin 2 is connected to the 1/4" plug tip, XLR pin 3 is connected to the 1/4" plug ring, balanced audio cables utilize impedance balanced lines that reduce EM and RF noise and extend the effective range of the cable run..

Check Stock

Crown XLi1500 Two-channel, 450-Watt at 4Ω Power Amplifier

User selectable input sensitivity - 0. 775V and 1. 4V.
Electronically balanced RCA & XLR inputs.
Efficient forced-air cooling prevents excessive thermal buildup.
Two level controls, power switch, power LED, and six LEDs which indicate signal presence, clip and fault for each channel.
Input: balanced XLR (x2), unbalanced RCA (x2).
Output: Speak on (x2), Binding Post (x2 pair).

Check Stock

ART Tube MP Professional Mic Preamp/Processor

12AX7 tube-based mic preamp for quality sound.
70dB of gain while maintaining a low noise floor suitable for digital.
1/4" TRS and XLR balanced outputs, input and output level controls.

Check Stock

Cable Matters 2-Pack XLR to XLR Gender Changer Adapter - Female to Female

Balanced female XLR to female XLR adapter changes an XLR output into an XLR input.
Pro-grade performance delivers pristine sound with this female to female XLR adapter.
Female XLR gender change adapter features robust construction in a rugged metal housing.
XLR female to female adapter is compatible with standard microphone cable.
Convenient and cost effective 2-pack female to female XLR coupler.

Check Stock

Cable Matters 2-Pack XLR to XLR Gender Changer Adapter - Male to Male

Balanced male XLR to male XLR adapter changes an XLR input into an XLR output.
Pro-grade performance delivers pristine sound with this male to male XLR adapter.
Male XLR gender change adapter features robust construction in a rugged metal housing.
XLR male to male adapter is compatible with standard microphone cable.
Convenient and cost effective 2-pack male to male XLR coupler.

Check Stock

CUNBANZ 5.9FT XLR Female to 1/4\(6.35mm) TRS Nylon Braided Balanced Microphone Cable,TRS to XLR Female Cable Mic Cord

【22AWG OFC】XLR Female to 1/4" TRS Cable,This Cable is designed to convert a balanced 1/4" TRS output to a balanced XLR input. 22Awg 100% oxygen free copper ensures interference free audio transmission, providing excellent cable performance and reliable connection..
【Professional Quality】24k Gold-Plated Connectors for resist corrosion and provide durability and improve the signal transmission.
【Wide Compatibility】Balanced XLR to 1/4 Cable Compatible with Microphones, Audio Sound Consoles, Power Amplifier, Stereo System, Wireless Microphone Receiver.It's especially great for ecording studios, live performance, schools, churches, public speeches, parties and any other professional audio equipments, etc..
【Durability】Using Heavy Nylon Braid Jacket to provide a strong tensile ability. This xlr microphone cable can withstand bend test of 10,000+ times and ensure the best performance possible.6.35mm TRS connector has 360 degree easy-grip treads for frequent unplugging. Meet your need to carry frequently.
【Warranty】If there exists quality issues,please contact our service team directly for help,Balanced 1/4 to XLR Male Cable with 1-years of warranty.

Check Stock

GLS Audio 25 Foot Mic Cable Balanced XLR Patch Cords - XLR Male to XLR Female 25 FT Microphone Cables Brown Yellow Tweed Cloth Jacket - 25 Feet Mike P

【22AWG OFC】XLR Female to 1/4" TRS Cable,This Cable is designed to convert a balanced 1/4" TRS output to a balanced XLR input. 22Awg 100% oxygen free copper ensures interference free audio transmission, providing excellent cable performance and reliable connection..
【Professional Quality】24k Gold-Plated Connectors for resist corrosion and provide durability and improve the signal transmission.
【Wide Compatibility】Balanced XLR to 1/4 Cable Compatible with Microphones, Audio Sound Consoles, Power Amplifier, Stereo System, Wireless Microphone Receiver.It's especially great for ecording studios, live performance, schools, churches, public speeches, parties and any other professional audio equipments, etc..
【Durability】Using Heavy Nylon Braid Jacket to provide a strong tensile ability. This xlr microphone cable can withstand bend test of 10,000+ times and ensure the best performance possible.6.35mm TRS connector has 360 degree easy-grip treads for frequent unplugging. Meet your need to carry frequently.
【Warranty】If there exists quality issues,please contact our service team directly for help,Balanced 1/4 to XLR Male Cable with 1-years of warranty.

Check Stock

DBX 231S Dual 31 Band Graphic Equalizer Audio Rack Mount EQ+Compressor+Cables

Package Includes: (1) DBX 231S Dual 31 Band Graphic Equalizer Pro Audio Rack Mount EQ + Low Cut Filter, (1) DBX 266XS 2-Channel Compressor/Gate Rack....
Features of 231S: Dual 31-band, 1/3-octave Constant Q frequency bands, Switchable boost/cut ranges of ±6 or ±12 dB, Front panel bypass switch, ±12....
Specifications of 231S: Input Connectors: 1/4" TRS, female XLR (pin 2 hot), Input Type: Electronically balanced/unbalanced, RF filtered, Input....
Features: Error proof operation to smooth uneven levels, add sustain to guitars, fatten drums or tighten up mixes, New gate timing algorithms ensure....
Features of RCXFM20E-B: RockvilIe RCXFM20E-B 20 Foot Nickel Plated Female to Male XLR Microphone Cable, XLR Connectors with Internal Strain Relief for....

Check Stock

6 Beyerdynamic DT-880-PRO-250 Studio Recording Headphones+Presonus Headphone Amp

...ecification Sheet (Link Opens In A New Tab). Click Here To View The User Manual (Link Opens In A New Tab)..
PreSonus HP60 6-Channel Amplifier Headphone Amp with Talkback and A/B Input Mix. Six independent ultra low noise, high output headphone amplifiers (150 mW per channel). Two sets of stereo inputs (A and B) with balanced TRS connectors. Stereo external input point on each channel for more me with trim control. Mix control between inputs A and B. Talkback with external XLR microphone with control. Direct stereo line output on each channel. Input A: (2) TRS balanced 10k Ohms.
Input B: (2) TRS balanced 10k Ohms. External Input: TRS stereo unbalanced 10k Ohms. Headphone Amplifier Output Power: 150 mW RMS (60 Ohms) per channel. Audio Outputs: TRS stereo unbalanced per channel. Master Controls: Talk button, Talkback volume, Input A, Input B. Channel Controls: Headphone level, Mix A/B control, External input level, Mono, Mute. External Talkback: XLR with TS external control jack. Power: IEC - factory configured for 115V or 230V. Rack Space: 1U.

Check Stock