Top Bakelite Injection Mould Reviews

1 1/2 Dia, 1/4-20 thds Tapped, Black Phenolic Plastic Ball Knob - Inch (1 Each)

【Feature】-The Ball knob Injection molding,Bakelite material, feels good.
Tightly molded-in insert insures optimal durability and functionality.
The round smooth surface gives a dressed-up finished appearance. Ideal lever knob for machine handles.
【Hight Quality】-The handle is made with premium quality and has excellent electrical insulation,oil resistance,weak acid resistance,alkali resistance and general solvent resistance,and has excellent mechanical properties such as toughness,rigidity,good rigidity and balance.
【Easy operation】-This Bakelite hand Knob is easy to install and remove and does not require any tools.
【Application】-Ultra-solid ball knob with a Shiny finish, suitable for general application,such as control levers and push-pull rods,lawn mowers,exercise equipment,machinery,valves,spigots,etc.

Check Stock

0.38 Pens Fine Point Smooth Writing Pens Ultra Fine Retractable Pens,Black Permanent Ink,0.38mm Tip Ultra Fine Gel pen

Grip - A:Doubled Injection Mould Process,The Two Parts of the Pen Grip and Pen Barrel are Injection Molded at the Same Time. B:The New Silica Gel....
Barrel - Octagonal Pen Barrel :Improved the Force-Bearing Surface in Contact with the Finger & Pressure and Drop Resistance of the Pen Barrel....
Ink – High-Quality Black Permanent Inks From "Mikuni "are Waterproof and Sun-proof, and can be archived permanently..
Tip - 0.38mm Ultra Fine Point, High-Precision Pen Tip, Production by Swiss MIKRON Machine Tool, Craftsmanship Comparable to a Swiss Watch, Tungsten....

Check Stock

2xhome Set of 2 Clear Louis Ghost Dining Armchairs Polycarbonate Designer Acrylic Transparent Crystal Chair with Arms Glass Modern Mid Century Victorian See Through for Desk Kitchen

Due to the glossy finish the clear chair, you will notice some swirls. Single injection molding will have molding line and injection point at some spots. They are not defected. Also blue/purple hue appears on the chair but will fade out over time..
Made from one single mould from crystal clear polycarbonate (stronger than acrylic).
Stackable, Scratch Resistant, and UV Protected.
Suitable for commercial and residential indoor & outdoor use.

Check Stock

Yinpecly 30mm OD 15mm ID 40mm Long Spiral Stamping Light Load Compression Mould Die Spring, for Mechanical Equipment 3D Printer Accessories Yellow Tone 2pcs

【SIZE】- Hole Diameter (Outer Diameter): 30mm/1.18".
Inner Diameter (Tolerance +1mm/-0.5mm): 15mm/0.59".
【MATERIAL】- The Compression mould die spring is made of spring steel, and the surface is painted, so there is more durable and can be reused many times.
【FEATURE】- Mold springs adopt closed design, rectangular cross-section, and harder than ordinary springs.
They have the characteristics of small size and high precision.
【APPLICATION】- Mold springs are mainly used in the mold machinery of injection molding machines, such as 3D printer heated bed, which are very suitable for high-stress applications, as well as various springs and other applications.
【PACKAGE CONTENT】- Package Content: 2pcs x Compression Mould Die Spring.

Check Stock

Yinpecly 12mm OD 6mm ID 30mm Long Spiral Stamping Middle Load Compression Mould Die Spring, for Mechanical Equipment 3D Printer Accessories Red Tone 10pcs

【SIZE】- Hole Diameter (Outer Diameter): 12mm/0.47".
Inner Diameter (Tolerance +1mm/-0.5mm): 6mm/0.24".
【MATERIAL】- The Compression mould die spring is made of spring steel, and the surface is painted, so there is more durable and can be reused many times.
【FEATURE】- Mold springs adopt closed design, rectangular cross-section, and harder than ordinary springs.
They have the characteristics of small size and high precision.
【APPLICATION】- Mold springs are mainly used in the mold machinery of injection molding machines, such as 3D printer heated bed, which are very suitable for high-stress applications, as well as various springs and other applications.
【PACKAGE CONTENT】- Package Content: 10pcs x Compression Mould Die Spring.

Check Stock

Yinpecly 20mm OD 10mm ID 30mm Long Spiral Stamping Light Load Compression Mould Die Spring, for Mechanical Equipment 3D Printer Accessories Blue Tone 10pcs

【SIZE】- Hole Diameter (Outer Diameter): 20mm/0.79".
Inner Diameter (Tolerance +1mm/-0.5mm): 10mm/0.39".
【MATERIAL】- The Compression mould die spring is made of spring steel, and the surface is painted, so there is more durable and can be reused many times.
【FEATURE】- Mold springs adopt closed design, rectangular cross-section, and harder than ordinary springs.
They have the characteristics of small size and high precision.
【APPLICATION】- Mold springs are mainly used in the mold machinery of injection molding machines, such as 3D printer heated bed, which are very suitable for high-stress applications, as well as various springs and other applications.
【PACKAGE CONTENT】- Package Content: 10pcs x Compression Mould Die Spring.

Check Stock

Othmro 5Pcs Threaded Ball Knobs, 1.97Inch Dia 0.47Inch Thread M12 Female Thread Black Bakelite Handle Thermoset Ball Knob for Lawn Mowers Exercise Equipment Machinery Valves Spigots (M12x50)

【Feature】-The Ball knob Injection molding,Bakelite material, feels good.
Tightly molded-in insert insures optimal durability and functionality.
The round smooth surface gives a dressed-up finished appearance. Ideal lever knob for machine handles.
【Hight Quality】-The handle is made with premium quality and has excellent electrical insulation,oil resistance,weak acid resistance,alkali resistance and general solvent resistance,and has excellent mechanical properties such as toughness,rigidity,good rigidity and balance.
【Easy operation】-This Bakelite hand Knob is easy to install and remove and does not require any tools.
【Application】-Ultra-solid ball knob with a Shiny finish, suitable for general application,such as control levers and push-pull rods,lawn mowers,exercise equipment,machinery,valves,spigots,etc.

Check Stock

XIZE SH Black Ink Pens Waterproof No Smudge Pen for Writing Cool Pens,Fine Tip 0.5mm,12-Count 3345

Grip - A:Doubled Injection Mould Process,The Two Parts of the Pen Grip and Pen Barrel are Injection Molded at the Same Time. B:The New Silica Gel Material is Softer and Feels Better.After a Long Period of Storage and Use, It Can Always Refuse Hollowing and Slipping..
Ink – Dynamic Gel Ink Formula that's Mikuni(R) High Quality Ink for Quick-Drying and Colorfast Writing..
Tip - 0.5mm Extra Fine Point, High-Precision Pen Tip, Production by Swiss MIKRON Machine Tool, Craftsmanship Comparable to a Swiss Watch, Tungsten Carbide Pen Ball, Wear-Resistant, Corrosion-Resistant, and More Suitable for Long-Term Writing..
Barrel - Octagonal Pen Barrel :Improved the Force-Bearing Surface in Contact with the Finger & Pressure and Drop Resistance of the Pen Barrel Itself,Thereby Improving the Actual Sense of Use..
Pack - Includes 5 black gel ink pens. Box Size:5.82*2.28*0.75 Inch(148*58*19mm).

Check Stock

BeswinVR Halo Strap for Oculus Quest 2 and Original Quest- Virtual Reality Accessories- White Color

【Latest Adapter】Design for Quest 2, Quick install without D.I.Y spacer. The new adapter tighten fit with Quest 2 well..
【Latest Version】2020 ergonomic Designed head strap for Oculus Quest, No squeeze on face and nose, 50: 50 Balance weight between Oculus quest....
【Comfort and Convenience】Easy-to-use size adjustment dial and hard-sided construction, 99% comfortable like HTC Vive Audio strap..
【Packing List】1x Halo Strap, 2x PU leather pad, 1x head top belt..
【Duability】100% injection mould made, No any 3D print, duable and long-life use at home, VR arcade and VR parks..

Check Stock

Geekpure 10 Inch Reverse Osmosis RO Filter Housing -1/4 Port-Fit for 2.5 x10 Filters

Replacement housing for Geekpure RO system,Widely used in RO system or pre-filtration.
Fit with most RO systems using standard 10" filters.But different brand,the injection mould is totally different,NOTE:PLEASE REPLACE HEAD AND HOUSING BODY TOGETHER.
INLET-OUTLET-1/4" female threaded in and out fittings.matched quick fitting ASIN:B078VQN6TZ.
SIMPLE INSTALLATION-Easy to replace.Food grade polypropylene will not cause pollution to water.
Pack of 7. 1 x Filter housing , 2 x O rings ,1 x wrench,2 x fittings,1 set screws.

Check Stock

IMUSA USA Heavy Duty 13-Piece Cast Aluminum Cajun Cookware Set, Silver

10" Frypan W/Bakelite handle, 1. 0Qt sauce pan W/lid & Bakelite handle, 2. 0Qt sauce pan W/lid & Bakelite handle, 3. 0Qt stock pot W/lid & tray, 5. 0Qt stock pot W/lid & tray, 15" Cajun classic oval alum. Roaster W/lid & tray.
Included Components: Set Includes: 1 And 2Qt Sauce Pan, 3 And 5Qt Sauce Pan, 10 And 15" Fry Pan And 2 Steamer Inserts.

Check Stock

WantJoin Pressure Cooker 8 Quart Stainless Steel Pressure Canner Induction Compatible Cookware with Spring Valve Safeguard Devices,Compatible with Gas & Induction Cooker

✔[HIGH INTENSITY STAINLESS STEEL MATERAL]----The main part is made of excellent quality stainless steel, it features fine corrosion resistance, high....
✔[8 LITER LARGE CAPACITY]----8.45 qt large capacity pressure cooker, you can cook a large amount of food at one time, professional pressure cooker....
✔[MULTIPLE SAFEGUARD DEVICES]----Special indicative springvalve is designed when there is enough steam pressure inside the cooker, the niddle lever....
✔[ANTI-RUST & HIGH TEMPERATURE RESISTING]----The connecting piece for the float rod and the sliding piece are both made of quality stainless steel.....
✔[REINFORED HANDLE]----The handle is made of quality bakelite by means of injection. It features go at resistance and high intensity. The upper....

Check Stock

IMUSA USA Heavy Duty 8-Piece Cast Aluminum Cajun Cookware Set Silver

Set includes: 10" Fry pan W/Bakelite handle, 1. 0Qt sauce pan W/lid & Bakelite handle, 2. 0Qt sauce pan W/lid & Bakelite handle, 5. 0Qt stock pot....

Check Stock