Top Backwash Hose Rollers Reviews

D-WEIXIN 2' × 50' Pool Backwash Hose, Heavy Duty Reinforced Blue PVC Lay Flat Water Discharge Hoses for Drain Pools and Clean Filters

  • The pool backwash hose is made of PVC and reinforced with polyester yarn, can withstand 90 psi working pressure during water supply and drainage, heavy-duty, superior strength, economical, durable, leak-free and weather, chemical and burst resistant..
  • Backwash hose is standard 2 inch hose, flat 3.4’’ wide, fit 2’’ standard size filter outlet or cam lock / pin lug fittings, and fit 1.5’’ or less size schedule 40/80 PVC pipe. Be sure to measure your filter outlet to ensure proper fit before ordering..
  • The discharge hose is essential swimming pool supplies, works as pool drain hose, pool pump hose, filter waste hose, also works for agricultural water discharge, irrigation, landscaping, construction dewatering and submersible pumping..
  • The pool hose is made to fit standard connections to backwash pool filtration systems , and you can easily install it with clamp. After use, just roll it up and hardly take up any space, and then store it in a dry place for next use, away from direct sunlight..
  • Unlike traditional paper-thin single layer hose, it can be used multiple times and withstand rough handling. If you want a drain hose that will last, this is what you are looking for!.
Check Stock

2 Pack 1.5' x 50' Swimming Pool Backwash Hose- Weather Resistant Heavy Duty PVC Lay-Flat Water Discharge Hose General Purpose Reinforced Pool Drain Hose for While Back-Washing Filter and Draining Pool

  • High Quality Material: Our heavy duty swimming pool backwash hose is made of reinforced PVC material with delicate workmanship, which is resistant to chemical, high-pressure and abrasion. Excellent wear resistance and weather resistance make it durable to use..
  • Universal Size: The inside diameter is about 1.5 inches, the length is about 50 feet. The applicable temperature ranges from 23°F to 149°F (-5°C to 65°C). Our universal size pool drain hose is suitable for most ground and above ground swimming pool equipment. 0.25mm thickness swimming pool backwash hoses can withstand the maximum burst pressure of 0.1Mpa..
  • Wide Application: As essential pool backwash accessories, our pool discharge hose can be widely used in most ground pool equipment such as pool drain hose, pool pump hose, pool filter waste hose, pool clean-out filter and so on..
  • Easy to Use and Store: Our PVC pool hose can be easily connected to the pump, which makes the whole thing easy and convenient. When you are ready for storing it for next use, just flat rolled up and store in a dry place out of direct sunlight. It will help you clean your pool water for a long time..
  • Package Information: There are 2 reinforced PVC material swimming pool backwash hoses included in the package, which m....
Check Stock

Fits up 100' x 1-1/2' Hose Swimming Pool Backwash Hose Reel ONLY

  • Hold up to 100' ft of 1½" backwash hose.
  • Holds up to 100' of 1½" backwash hose or electric extension cord..
Check Stock

1-1/2' (Flat 2.6’’ width)x 50 FT Pool Backwash Hose, Blue Heavy Duty Reinforced PVC Lay Flat Water Discharge Hose for Swimming Pool Filter Pump,with 1 Clamp…

  • [SIZE]:1.5’’ Inside diameter, Flat 2.6’’ width.
  • Fits 1.5’’ hose adapters, fits 1’’ or less size schedule 40/80 PVC PIPE (Max outside diameter not to exceed 1.5 inch, otherwise you need a adapter)..
  • [EASILY USE]: Each item comes with a new metal clamp, you can easily connect the backwash hose to your pipes or filter outlets and directly fix it with clamp..
  • [WIDELY USED]: Ideal for draining above ground swimming pools, backwash pool filter, sewage pump, sump pump, trash pump, pool drain and sand filter pumps etc.
  • widely used in household, mine, factory, agriculture, and architectural engineering.
  • This pool discharge hose can adapt to most outdoor conditions and all seasons..
  • [NO LEAK]: Discharge hose doesn’t leak or burst within 90 psi W.P. due to reinforcement and uniform coating..
  • [GOOD SERVICE]: Our aim is to provide durable heavy duty backwash drain hose. Any questions, please feel free to contact us, I will provide solutions within 24 hour..
Check Stock

Audio Recorder X

  • SHAMPOO BACKWASH UNIT: This professional shampoo chair and bowl is a complete hair washing station, ideal for hair salons and barber shops..
  • SLEEK DESIGN: The backwash station features smooth lines with gently rounded arms and back in classic grey vinyl, finished with a clean white bowl to complement any modern salon..
  • EXTRA WIDE SEAT: The comfortable seat features high density foam padding giving the extra wide chair a cushioned finish, while a kick-out leg rest allows clients to find their perfect position..
  • TILTING BOWL: The tilting porcelain backwash bowl is finished with a custom fitting neck rest, and is supplied with all hardware including a single handed faucet, black shampoo hose and vacuum breaker..
  • 1 YEAR WARRANTY: We understand the needs of the busy professional salon.
  • your Buy-Rite Lexus salon backwash unit comes with a 1-year warranty for complete peace of mind..
Check Stock

2' x 50ft PVC Lay Flat Discharge Hose With Aluminum Camlock C & E Fittings, Cam Lock Fitting Type A included, Heavy Duty Reinforced Pump Backwash Hose Assembly

  • ...is made of PVC material reinforced with high tensile strength polyester yarn, 2" Female Type C Coupler x 2" Male Type E Connector is installed on both ends of hose by stainless steel clamps, high pressure, sturdy and durable, abrasion resistance, anti-aging, chemical resistance, you can use for a long time..
  • [SIZE]: Backwash pump hose, standard 2 inch diameter, Flat width 3.4 inch.
  • 2 in Aluminum cam lock fittings type C, type E and extra TYPE A adapter. Length: 50 feet.
  • Temperature Range: 23°F to 149°F (-5°C to 65°C).
  • [TYPE A FITTINGS]: The item include a type A (male adapter x female NPT threaded ) cam and groove hose fitting, you can directly screw onto pump male threaded outlet, then realize quick connect or disconnect between discharge hose assembly with pump..
  • [NO LEAK]: Pool Backwash hose doesn’t leak or burst within 90 psi working pressure. Because the delivery hose body adopts fine double-sided coating and fiber reinforcement. The camlock coupling shank is special multi-section structure and added black rubber ring and sealant at the connection..
  • [WIDELY USED]: Ideal for draining swimming pools, backwash pool filter, sewage pump, sump pump, trash pump, pool drain and sand filter pumps etc.
Check Stock

2' x 50ft PVC Lay Flat Discharge Hose With Aluminum Camlock C & E Fittings, Cam Lock Fitting Type F included, Heavy Duty Reinforced Pump Backwash Hose Assembly

  • ...is made of PVC material reinforced with high tensile strength polyester yarn, 2" Female Type C Coupler x 2" Male Type E Connector is installed on both ends of hose by stainless steel clamps, high pressure, sturdy and durable, abrasion resistance, anti-aging, chemical resistance, you can use for a long time..
  • [SIZE]: Backwash pump hose, standard 2 inch diameter, Flat width 3.4 inch.
  • 2 in Aluminum cam lock fittings type C, type E and extra TYPE F adapter. Length: 50 feet.
  • Temperature Range: 23°F to 149°F (-5°C to 65°C).
  • [TYPE F FITTINGS]: The item include a type F (male adapter x male NPT threaded ) cam and groove hose fitting, you can directly screw onto pump female threaded outlet, then realize quick connect or disconnect between discharge hose assembly with pump..
  • [NO LEAK]: Pool Backwash hose doesn’t leak or burst within 90 psi working pressure. Because the delivery hose body adopts fine double-sided coating and fiber reinforcement. The camlock coupling shank is special multi-section structure and added black rubber ring and sealant at the connection..
  • [WIDELY USED]: Ideal for draining swimming pools, backwash pool filter, sewage pump, sump pump, trash pump, pool drain and sand filter pumps etc.
Check Stock

PneumaticPlus RED EPDM synthetic Rubber Air & Water Hose 1/4\ ID x 0.53\ OD with 1/4\ NPT Male Fitting Connections (6 FT)

  • ...ial reinforced with high tensile strength polyester yarn, 3" Female Type C Coupler x 3" Male Type E Connector is installed on both ends of hose by stainless steel clamps, high pressure, sturdy and durable, abrasion resistance, anti-aging, chemical resistance, you can use for a long time..
  • 003c/b003e[SIZE]:003c/b003e Backwash pump hose, standard 3 inch diameter, Flat width 4.85 inch.
  • 3 in Aluminum cam lock fittings type C, type E and extra TYPE A adapter. Length: 50 feet.
  • Temperature Range: 23°F to 149°F (-5°C to 65°C).
  • 003c/b003e[NO LEAK]:003c/b003e Pool Backwash hose doesn’t leak or burst within 90 psi working pressure. Because the delivery hose body adopts fine double-sided coating and fiber reinforcement. The camlock coupling shank is special multi-section structure and added black rubber ring and sealant at the connection..
  • 003c/b003e[WIDELY USED]:003c/b003e Ideal for draining swimming pools, backwash pool filter, sewage pump, sump pump, trash pump, pool drain and sand filter pumps etc.
  • widely used in household, mine, factory, agriculture, and architectural engineering.
  • This drain hose can adapt to most outdoor conditions and all seasons..
  • 003c/b003e[EASILY USE]:003c/b003e It can be easily connected, after Type A is....
Check Stock

POOLWHALE Heavy Duty 1-1/2" x 100' Thick 1.2mm Black Backwash Pool Hose with Clamp - Flat Water Discharge Hose - Chemical and Weather Resistant - Drain Clean Swimming Pools & Filters

  • 1.2mm thick discharge hose 1-1/2 inch (38mm) diameter by 100 foot (30.4m) long swimming pool backwash hose with metal hose clamp.
  • Heavy-duty tough hose that's the weather, chemical, and burst resistant reinforced commercial grade PVC hose that is custom made for swimming pools.
  • Built with high tensile strength braided polyester fiber that's circularly woven to provide extra reinforcement from bursting.
  • Pool backwash hose can easily connect to the pump, Rolls up for easy storage when not in use, and stored in a dry place out of direct sunlight for next time,Holds up to extreme weather conditions..
  • Ideal for In-ground and above-ground pool equipment. It not only can be used as a household drain hose but also sump pump discharge hose, trash pump discharge hose for mine, factory, agriculture, and architectural engineering.
Check Stock

2 IN x 50 FT Pool Backwash Hose, Heavy Duty Flat Discharge Hose, Weather and Burst Resistant, Best Pool Hoses for Inground Pools, Pool Filter Hose & Pool Drain Hose

  • Black Rhino 2 Inch (51mm) Diameter By 100 Foot (30.4M) Long Swimming Pool Backwash Hose with Metal Hose Clamp..
  • Extra heavy-duty superior strength hose with very thick 1.2 mm (47 mils) walls. Rhino tough hose that's the weather, chemical, and burst resistant..
  • Built with High Tensile Strength Braided Polyester Fiber That's Circularly Woven To Provide Extra Reinforcement From Bursting..
  • Made To Fit Standard Connections To Backwash Pool Filtration Systems For Use To Drain Pools and Clean-Out Filters. Commercial Grade Hose That Also Works As An Agricultural Water Discharge..
Check Stock

Milliard 50 ft Heavy Duty Backwash Hose, Great for Water Disposal - Weather and Chemical Resistant - 2 inch Diameter

  • Don’t let your pool pump create a marsh in your yard, use a backwash hose to drain water out to the street or sewer..
  • 2in. diameter for standard filter coupling..
  • Weather and chemical resistant to prevent leaks and tears from regular use..
  • 50’ backwash hose folds flat for easier storage when rolled up..
  • Made from heavy duty vinyl to be flexible, durable, and long-lasting..
Check Stock

U.S. Pool Supply Black Rhino 2" x 100' Pool Backwash Hose with Hose Clamp - Extra Heavy Duty Superior Strength, Thick 1.2mm (47 mils) - Weather Burst Resistant - Drain Clean Swimming Pools and Filters

  • Black Rhino 2 Inch (51mm) Diameter By 100 Foot (30.4M) Long Swimming Pool Backwash Hose with Metal Hose Clamp..
  • Extra heavy-duty superior strength hose with very thick 1.2 mm (47 mils) walls. Rhino tough hose that's the weather, chemical, and burst resistant..
  • Built with High Tensile Strength Braided Polyester Fiber That's Circularly Woven To Provide Extra Reinforcement From Bursting..
  • Made To Fit Standard Connections To Backwash Pool Filtration Systems For Use To Drain Pools and Clean-Out Filters. Commercial Grade Hose That Also Works As An Agricultural Water Discharge..
Check Stock

U.S. Pool Supply Black Rhino 1-1/2" x 100' Pool Backwash Hose with Hose Clamp - Extra Heavy Duty Superior Strength, Thick 1.2mm (47mils) - Weather Burst Resistant - Drain Clean Swimming Pools, Filters

  • Black Rhino 1-1/2 Inch (38mm) Diameter By 100 Foot (30.4M) Long Swimming Pool Backwash Hose with Metal Hose Clamp..
  • Extra heavy-duty superior strength hose with very thick 1.2 mm (47 mils) walls. Rhino tough hose that's the weather, chemical, and burst resistant..
  • Built with High Tensile Strength Braided Polyester Fiber That's Circularly Woven To Provide Extra Reinforcement From Bursting..
  • Made To Fit Standard Connections To Backwash Pool Filtration Systems For Use To Drain Pools and Clean-Out Filters. Commercial Grade Hose That Also Works As An Agricultural Water Discharge..
Check Stock