Top Axle U Bolts Reviews

New Trailer U Bolt kit for 5200-7000lbs 3" Round Axle 7" Long 1/2" Dia -20080

(4) 5 Leaf Slipper Spring for 7000 lb Axles.
(4) U-bolt Tie Plates for 1-3/4" or 2" Spring.
(8) 3-1/2" long x 9/16" diameter shackle bolts.
(2) 4-11/16" long x 7/8" diameter equalizer bolts.
This supsension and hanger kit is for a 7k tandem axle setup (14K total capacity).

Compatibility: Trailer U Bolt kit is for 5200-7000lbs round axle which axle beam diameter 3" ..
Package Include: 4 x 7'' long U bolts(dia. at 1/2"), 2 x tie plates for 1-3/4" leaf springs, 8 x 1/2"-20 hex nuts.
Structure Stability: All parts are made of high quality steel, not easy to break, deformation, rust, very durable for your need..
Tips: In order to prevent wear, we recommended to use lubricant during installation..
If you have any question about the product, please ask us via message seller and we will response in 24 hours..

Perfect fit:For Chevy Silverado C1500 1988-1998, For GMC C1500 Half-Ton Trucks 1988-1998..
Features - The kit can be used to lower your truck by placing the rear axle on top of the leaf spring..
Package including: 2*Spring axle plates,2*Perches,4*U-bolts,2*Bump stops and hardware..
Material - Heavy duty stainless steel lift kit, for rusting resistance and long service time.Durable and anti-rust..
SATISFACTION SERVICE - If you are not satisfied with our products.You can request a full refund within 30 days to support a 12 month warranty.Professional and sincere service allows you to purchase without risk!.

COMPATIBLE WITH 1995 - 2022 Toyota Tacoma (2WD 4WD). *Does NOT fit 5-Lug models..
CONTENTS: (2x) High-Strength Steel Rear Lift Blocks - 9/16 Pin, (4x) Square Bend 9/16th U-Bolts, Installation Hardware, Installation Instructions,....
TECHNICAL NOTES: 1 inch rear suspension lift. | *Please note that our lift block kits are designed to be installed directly to your truck's factory....
INSTALLATION: Designed to be installed simply and easily by placing our lift blocks between your axle and OE leaf pack, and then securing everything....
BENEFITS: Improves the look of your vehicle and increases rear-end ground clearance, allowing you to fit larger custom rims and tires. Due to their....

COMPATIBLE WITH 1987 - 2004 Dodge Dakota. *Only fits AWD models with 8.25" rear axle..
CONTENTS: (2x) Front Lift Torsion Keys, (2x) Rear Tapered Lift Blocks, (4x) Square Bend U-Bolts, (2x) Axle Alignment Shims, Installation Hardware,....
TECHNICAL NOTES: Adjustable 1 to 3 inch front and 2 inch rear suspension lift..
INSTALLATION: Easy bolt-on installation takes 2 to 4 hours. A torsion bar puller, or 5 ton gear puller is required for install. An alignment is always....
BENEFITS: Improves the look of your vehicle and increases ground clearance, allowing you to fit larger custom rims and tires. Our front MAX-Torsion....

Model: KHE MVP V2 / 22mm / 48 teeth / 175mm / RHD and LHD compatible.
Material: 100% high quality 4130 CrMo / Heat Treated / Color: OIL SLICK.
Arms: crank axle: 19mm 48 spline (48T) / axle length: 140mm / chainring and axle bolts included.
Weight of arms and axle: only 1.79lbs / with KHEbikes MVP laser logo / For 9/16 inch pedals.

Please note£ºexcluding bolts, size of Bolts to mag wheel:M5x23mm, if your sprocket is thicker than standard sprocket, we suggest bolts M5x25mm. Designed mainly for motorized bicycles.
do not need adapter, sprocket only needed.
put grease/lubricating oil on thread of wheel to prevent damage of thread from Riding£»inner diameter of rim:17.5mm/0.689inch.
Aluminum Wheels Excluding chain drive Sprocket£»Thread size: 1.375 inch X24T.
the hole spacing for front and rear wheel both 44mm, please see the last picture£»NOTE: It's inevitable that there will be SCRATCHES or PAINT PEELING during transportation, buy carefully if you are concerned..
Size for Wheel Axle: LxT(front axle): 160mm x 10mm.
light and very durable. 29"/700c Size Wheel.
the hole spacing for front disc brakes of mag wheel to be added is 44mm.
PLEASE NOTE 1: the best safe speed if racing: 35km/h£»Attention: Standard 9 hole sprockets 24T to 60T in Kit do not work on this alum wheel, buyer need drill 6 holes in middle to make sprocket fit on the alum wheel or buyer buy CDH multifunctional sprocket which fits well on CDH alum wheel.

Rims: WTB ST i25, Tubeless Compatible System, NOT Includes Tubeless Tape and Valves. Wheel Size: 27.5", ETRTO 25-584. Inner Width: 25 mm. Spokes: 32 Stainless Steel.
Break System: 6 bolt Disc. Material: Alloy. Axle size convertible to fit on your different bikes.
Front Hub: Novatec XD641SB, Quick release, 15x100mm or 20x100mm Thru Axle(Axle not included),2 Sealed bearing, 32H, Gauge 14, Disc 6 bolts. Rear Hub: Novatec D462SB-SL , Quick release or 12x142mm(Axle not included), 2 Sealed bearing, 5 Pawls, 32H, Gauge 14, Disc 6 bolts, 9 10 11 Speed compatible.
Tyre: Continental X-King MTB Tyre 27.5" x 2.2. Tyre Max PSI: 65. Inner Tube: CST FV48.
Weight: 4153g/set=9.15lbs. Package: Front and Rear Wheels with Tyres, Tubes, Hubs, Hub Spacer, Quick Release, Axle Size Conversion Kit. Warranty: 2 Year..

Drill two 3/16" holes on each end of mounting strap at marks corresponding to bolt circle diameter of rear wheel axle.
Open single hole in support angles if necessary to fit axle studs or Bolts.
Cut and trim strap 3/8" beyond rivet holes on both ends.
To clean hubodometer face, use a Damp cloth to prevent scratches. Do not use solvents, paints or thinners.

FITS: Many applications. Please message us with your make/model and current U bolt size if you have any questions about fitment..
CONTENTS: 4x Square U-Bolts (measurements are from inside the bend 8.5" long and 2.5" wide).
INSTALLATION: Bolt on kit. U bolts are 8.5" from the inside bend and just over 9" in overall length..
Ships Same/Next Business Day. 2-4 Day Delivery. Lifetime Warranty. Dedicated Customer Service. Call or message us with any questions!.
NOTES: Please measure your existing U bolts before purchasing to ensure these U bolts are correct for your application. Please message us if you have any questions..