Eaton 912A585 Detroit Truetrac 27 Spline Differential for Dana 30
- Ring Gear Size: 7.2 IN, Ring Gear Ratio: 3.73 & up.
- Catalog Notes: Applies to non-disconnect only.
Top Axle German Type Reviews
OTC 6540 Rear Axle Bearing Puller Set - 8 Piece
- Set contains slide hammer and popular attachments needed for servicing flange type floating rear axle bearing and seals in most late model rear wheel drive cars and light trucks.
- Includes 3 sizes of rear axle bearing pullers.
- Slide hammer tee bar and Slide hammer 5 LB head weight.
- Pulling hook rear axle pulling plate and bearing cup remover.
Burley Design 12.2MM Steel Hitch , Black
- Works with disc brake and full suspension.
- Fits QR axles and solid axles up to 12mm.
- 12mm Thru-Axles will require Burley’s adapted Thru-Axle. This replacement axle has external threading to accommodate the installation of our axle mounted hitches..
- If you are upgrading from a Classic Hitch to a Steel Hitch, you will also need to purchase a Burley Flex Connector.
The ROP Shop | Shaft Kit for Drift Trike Bikes includes 36 Inch Tubular Aluminum Shaft Axle
- The ROP Shop replacement Shaft Kit for Drift Trike Bikes includes 36 Inch Tubular Aluminum Shaft, Axle.
- Specs - Shaft Size: 36". Chain Type: #420. Wheel Size: 11 x 6.00 x 5. Maximum Weight Limit: 330 lbs. Refer to images 2 & 3 for more information.
- Includes - (1) 36" Tubular Aluminum Shaft Axle, (2) Racing Slick Tires with Aluminum Wheels (11x6.00-5), (1) Sprocket (54T), (1) Sprocket Hub Adapter Plate, (1) Chain (#420), (2) Bearing Hangers, (4) Bearing Flangettes, (2) Aluminum Race Hubs with 1 1/4" Bore, (1) Clutch with 3/4" Bore (10T, #420), (2) Axle Bearings, (4) Lock Collars, (3) Key Stocks, (6) Axle Nuts, (6) Bolts, (6) Nuts & (2) Snap Rings.
- This kit is used for many Drift Trike Bikes.
- Please be sure to check your part or model number to ensure this is the correct shaft axle wheel kit for your unit. Also, please note this may replace multiple part numbers.
GREEN FABWOOD 75 Type Plastic Crown Gear Single Double Reduction Gear Worm Gear (Original Version)
- 75 Type Plastic Crown Gear Single Double Reduction Gear Worm Gear Description: Material: plastic Type: spindle gear, crown gear, single gear, double gear, worn gear, bevel gear, belt pulley, belt, connecting rack, axle sleeve, tee collar Quantity: 75 Feature: 75 type ideal for DIY science and small production, product design and mechanical model Package included: 19X Double Reduction Gear(each one) 12X Single Reduction Gear(each on) 11X Crow Gear(each one) 2x Worm Gear(each one) 9X Spindle Gear(each one) 7X Belt Pulley(each one) 6X Axle Sleeve(each one) 5X Belt(each one) 2X Connection Rack(each one) 1X Tee Collar.
Julymoda 600mm 24" Rear Axle Track Assembly Kits for Go Kart ATV Quad Rear Wheel Snow Sand Snowmobile DIY Use Metal Black
- Material: The rear axle is made of high quality alloy and metal material,which is durable.
- Type:Rear Axle Track Assemly with track parts and Placement on Vehicle Rear,Left and Right..
- Rear axle length 600mm/60cm/24inch,with two rear wheels Set..
- Wide Application : This set fits gasoline motor use,like Beach motorcycle,Snowmobile,Mountain motorcycle DIY etc..
Detroit Axle - 4WD Front Suspension and Wheel Bearing, Tie Rods, Sway Bars, Ball Joints Replacemrnt for Blazer S10 Sonoma Jimmy - 16pc Set
- 16-Pc Complete Front Suspension Rebuilt Replacement Kit.
- Fits: Specific Models - Check Fitment Chart and Product Description for Accurate Information.
- Drive Type: 4WD | Flange Type: 3-Bold Triangular | Lugs: 5 Bolt | ABS Type: Sensor.
- Detroit Axle is a leading supplier of ride control products to OE vehicle manufacturers Nationwide, that expertise translates to Detroit Axle's OE-quality Aftermarket.
Pinalloy Set of 2 Red Tandem Axle Wheel Kit Set for Skateboard Cruiser Longboard Truck
- Please be noted: Images shown Skateboard, Trucks and Wheels ARE NOT included! They are for illustration purposes only..
- Type: (Set of 2pcs) Tandem Axle Kit/ Double Wheeled Kit Set.
- Including: (Set of 2pcs) CNC Alloy Tandem Axle Wheel Kit set.
- (4pcs) 55MM Black oxide Hardened Cap Screws.
- Needed to Complete: Skateboard / Longboard Deck Trucks Wheels Bearings.
AlveyTech 11x7.10-5 PVC Plastic Tire Sleeve for Drift Trikes & Go-Karts
- The ROP Shop replacement 36 Inch Shaft Kit for Trike Drift Bikes includes (2) Go Kart Tires 11x6.00-5.
- Specs - Shaft Size: 36". Chain Type: #420. Wheel Size: 11 x 6.00 x 5. Maximum Weight Limit: 330 lbs. Refer to images 2 & 3 for more information.
- Includes - (1) 36" Tubular Aluminum Shaft Axle, (2) Racing Slick Tires with Aluminum Wheels (11x6.00-5), (1) Sprocket (54T), (1) Sprocket Hub Adapter Plate, (1) Chain (#420), (2) Bearing Hangers, (4) Bearing Flangettes, (2) Aluminum Race Hubs with 1 1/4" Bore, (1) Clutch with 3/4" Bore (10T, #420), (2) Axle Bearings, (4) Lock Collars, (3) Key Stocks, (6) Axle Nuts, (6) Bolts, (6) Nuts & (2) Snap Rings.
- This kit is used for many Drift Trike Bikes.
- Please be sure to check your part or model number to ensure this is the correct shaft axle wheel kit for your unit. Also, please note this may replace multiple part numbers.
Detroit Axle - Front Wheel Bearing & Hub Assembly Replacement for 2006-2010 Ford Explorer Mercury Mountaineer
- Replacement for 2006-2010 Ford Explorer - [2007-2010 Explorer Sport-trac] - 2006-2010 Mercury Mountaineer.
- Kit Includes: 1x Front Wheel Hub and Bearing Assembly.
- Hub Specification: Position: Front Left or Right | Lugs: 5 | Flange Type: 3-Bolt Triangular | ABS Type: Sensor Wire.
- Detroit Axle Suspension Components are Ready to Meet the Rigorous Demands of Today's Foreign and Domestic Passenger Cars, Trucks and SUVs.
- 10-Year Warranty. Detroit Axle Is a Leading Global Retailer and Distributor of OE Re-manufactured and New Aftermarket Auto Parts.
The ROP Shop | 40 Inch Shaft Kit for Drift Trike Bikes includes (4) Bearing Flangettes PFT-206
- The ROP Shop replacement 40 Inch Shaft Kit for Drift Trike Bikes includes (4) Bearing Flangettes PFT-206.
- Specs - Shaft Size: 40". Chain Type: #420. Wheel Size: 11 x 6.00 x 5. Maximum Weight Limit: 330 lbs. Refer to images 2 & 3 for more information.
- Includes - (1) 40" Tubular Aluminum Shaft Axle, (2) Racing Slick Tires with Aluminum Wheels (11x6.00-5), (1) Sprocket (54T), (1) Sprocket Hub Adapter Plate, (1) Chain (#420), (2) Bearing Hangers, (4) Bearing Flangettes, (2) Aluminum Race Hubs with 1 1/4" Bore, (1) Clutch with 3/4" Bore (10T, #420), (2) Axle Bearings, (4) Lock Collars, (3) Key Stocks, (6) Axle Nuts, (6) Bolts, (6) Nuts & (2) Snap Rings.
- This kit is used for many Drift Trike Bikes.
- Please be sure to check your part or model number to ensure this is the correct shaft axle wheel kit for your unit. Also, please note this may replace multiple part numbers.
The ROP Shop | 40 Inch Shaft Kit for Drift Trike Bikes with (3) Key Stocks 6x80, Chain #420
- The ROP Shop replacement 40 Inch Shaft Kit for Drift Trike Bikes with (3) Key Stocks 6x80, & Chain #420.
- Specs - Shaft Size: 40". Chain Type: #420. Wheel Size: 11 x 6.00 x 5. Maximum Weight Limit: 330 lbs. Refer to images 2 & 3 for more information.
- Includes - (1) 40" Tubular Aluminum Shaft Axle, (2) Racing Slick Tires with Aluminum Wheels (11x6.00-5), (1) Sprocket (54T), (1) Sprocket Hub Adapter Plate, (1) Chain (#420), (2) Bearing Hangers, (4) Bearing Flangettes, (2) Aluminum Race Hubs with 1 1/4" Bore, (1) Clutch with 3/4" Bore (10T, #420), (2) Axle Bearings, (4) Lock Collars, (3) Key Stocks, (6) Axle Nuts, (6) Bolts, (6) Nuts & (2) Snap Rings.
- This kit is used for many Drift Trike Bikes.
- Please be sure to check your part or model number to ensure this is the correct shaft axle wheel kit for your unit. Also, please note this may replace multiple part numbers.
DDCSV3.1 3 Axis Offline CNC Motion Controller Handwheel G Code PLC Control System Electronic Handwheel with Emergency Stop Function
- Upgrade algorithm,support soft interpolation,fixed arc interpolation bug of the old version. ARM9 main control chip,FPGA core algorithm chip. 16 opto isolated digital inputs,3 opto isolated digital outputs..
- 3 axle motor Control.Differential Pulse and direction output signal,maximum.500Khz per axle. Analog spindle control 0-10V spindle control (can be modified as PWM output). Jog function for each axle (continuous, step, defined distance). 24VDC power input, minimum Current is 0.5A..
- 5 inches TFT screen, resolution ratio: 480x272,17 operation keys. USB flash disk support for G code file input,no size limited of the G-code file. 1GB internal memory and support standard MPG..
- Support the operation of quickly specify the running position and ''Power Cut'' recovery. Data is automatically saved. Support the origin and Limit share the same Input ports.The controller only support NPN type limited switch..
- Drive output type, strong anti-interference ability, long-distance transmission. Applications: CNC machine tools, printing machinery and other zero correction and signal segmentation..