Top Awg Battery Cable Reviews

Senmit 10 Ton Hydraulic Cable Crimper Hand Tool for 1/8, 3/16 Stainless Steel Cable Railing Fittings, Heavy Duty Head, Come with 8 Pairs Dies and Cable Cutter

  • ... coating, strength and good toughness. The Oxide Crimp Head and Dies won't chip or flake. Dies are made of more hardened 40cr steel, this cable crimper is much better than classic chrome-plated models, for an enhanced performance..
  • 【WIDE APPLICATIONS】: Whether for battery and welding cable, building wiring, crimp heavy cast terminal lugs, this premium quality hydraulic cable crimper will do an outstanding job..
  • 【EASY TO USE】: 4 steps to perfect crimping: install the die set that matches your terminal size, rotate the release valve in order to close it, pump the handle until the resistance felt becomes significant and open the release valve by rotating to the left..
Check Stock

BougeRV 200W 9BB Solar Panels Kit with Solar Connectors Y Branch Parallel Adapter Cable and 20FT 10AWG solar cable

  • [ ✔180 Watts Solar Panel ] With high conversion efficiency modules, 180 watts monocrystalline solar panel can charge 12V battery or charge 24/48V battery by wiring several solar panels in series..
  • UPGRADE 2.0 SOLAR CABLE: Increase a free pair of separate solar connectors. One pair ( 1 piece black + 1 piece red ) 20 Feet 10AWG Solar Extension Cable. Made with copper. Extends and locks built-in cables. Two cables with connecters at one end connecting to solar panel and bare on the other end connecting to solar charge controller. The wiring is weatherproof and designed to withstand extreme heat and cold. Solar panel cable is typically sold in 14, 12 and 10 AWG sizes..
  • Y Branch parallel Connector (1 male to 2 female and 1 female to 2 male) Main Technical Specification: -Rated Current:20A -Rated Voltage: DC1000V The waterproof ring on connection is perfect to seal out water and dust to prevent corrosion. Suitable Single Core Cable Section: 14-10AWG (1.5mm² -- 6mm²).
  • [ ✔ User Friendly ] IP65 Rated Waterproof Junction Box can isolate environmental particles and low-pressure water jets. Diodes are pre-installed in junction box, with a pair of pre-attached 3ft Cable. Pre-drilled holes on the back of the panel allow you to quickly install solar panels witho....
Check Stock

Positive 36-inch 3/8” Positive Terminal Battery Replacement Cable, Heavy-Duty 2 AWG 100% Copper, 100mm Accessory Lead, 10mm Copper Lug End and 19mm Top Post Terminal, by Tech Team

  • When it comes to battery cables the LOWER the AWG number the HIGHER the current carrying capacity. Tech Team’s #2 AWG cables carry far more current than other #4 AWG, #5 AWG, or #6 AWG cables. This means less heat buildup and less voltage / amperage drop which prolongs the life of starters, inverters, motors, and other connected electrically powered devices..
  • Tech Team’s Positive Terminal Cable feature a 10mm – 3/8” diameter tinned double crimped 100% copper lug terminal end with a protective heat shrink polyolefin sleeves to prevent moisture incursion and eliminate corrosion and a military grade 19mm lead top post terminal with a 100mm accessory lead..
  • Tech Team’s battery cables are the best you will find anyplace and are the best possible option for Marine, Boat, Solar, Inverter, Motorcycle, Automobile, Tractor, Bulldozer, Excavator, Riding Mower, Golf Carts, and many other applications..
  • Includes one (1) red 36 inch #2 AWG 100% copper stranded wire top post positive terminal battery cable, a 100mm accessory lead, and a 100% copper 3/8” diameter tinned lug terminal end with heat a shrink protective sleeve..
Check Stock

Hammer Battery Lug Crimping Tool for 8, 6, 4, 2, 1/0, 2/0, 3/0, 4/0 American Wire Gauge (AWG) Wire and Cable

  • Hammer Battery Lug Crimper for use with 8 AWG, 6 AWG, 4 AWG, 2 AWG, 1/0 AWG, 2/0 AWG, and 3/0 (American Wire Guage) cable.
  • Perfect for crimping battery cables, welding cables and any other wire crimps for your auto or marine project.
  • Lug Crimper is spring loaded and only requires a standard hammer and solid surface to operate.
  • Lug Crimper is made of high quality hardened steel for years of maintenance free use.
  • Compact size! Only 3 1/2 inches tall, allowing easy storage in any size tool box.
Check Stock

36-inch 3/8” Battery Replacement Cable, 10mm Copper Lug Ends, Super Heavy-Duty 2 AWG 100% Copper, Automobile, Marine, Boat, Solar, Tractor, Mower, Golf Cart, Motorcycle, Heavy Equipment, by Tech Team

  • When it comes to battery cables the LOWER the AWG number the HIGHER the current carrying capacity. Tech Team’s #2 AWG cables carry far more current than other #4 AWG, #5 AWG, or #6 cables. This means less heat buildup and less voltage / amperage drop which prolongs the life of starters, inverters, motors, and other connected electrically powered devices..
  • Tech Team’s cables feature 10mm – 3/8” diameter tinned double crimped 100% copper lug terminal ends with a protective heat shrink polyolefin sleeves to prevent moisture incursion and eliminate corrosion. There is no need to buy battery cables with 5/16” diameter lug ends because the 3/8” (6/16”) will fit both size terminal studs..
  • Tech Team’s battery cables are the best you will find anyplace and are the best possible option for Marine, Boat, Solar, Inverter, Motorcycle, Automobile, Tractor, Bulldozer, Excavator, Riding Mower, Golf Carts, and many other applications. We price our #2 AWG cables to be competitive with thinner, lower capacity #4 AWG, #6 AWG, and #8 AWG cables..
  • Includes one (1) red 36 inch #2 AWG 100% copper stranded wire battery cable with 100% copper 3/8” diameter tinned lug terminal ends with hear shrink protective sleeves..
Check Stock

Copper Wire Terminal Connectors lugs,AWG6/4/2,1/0 Battery Cable Crimp Ring Ends with Heat Shrink Tubing Assortment Kit-80PCS,8 Types

  • The battery terminal Kit includes: total 80 pcs in one box, package includes AWG 6*5/16(5pcs),AWG 6*3/8(5pcs).AWG 4*5/16(5pcs),AWG 4*3/8(5pcs),AWG 2*5/16(5pcs),AWG 2*3/8 (5pcs),AWG 1/0*5/16(5pcs),AWG 1/0*3/8(5pcs),2:1 Heat Shrink Tubing(40PCS)..
  • Premium Quality: Our copper wire lugs are UL certified, offer reliable performance. The wire Crimp Ring terminal is made from fully annealed electrolytic copper construction provides excellent conductivity. 100% annealed copper resists corrosion from salt and moisture..
  • Excellent Design : Wire gauge identification marked on lug barrels.UL Tested & Approved,Can be Crimped or Soldered.Closed end design seals out moisture so cables stay dry and corrosion free. Also heavy duty construction for enhanced high temperature durability..
  • Widely Application: Best choice for making terminal connections. The battery cable ends are widely used in solar system, household appliances, automobiles, electrical industry, mechanical equipment, distribution box, battery , inverters etc.
  • Hardness: HV: 120 - 70, Surface: Salt spray test 48H environmental protection fog tin, Material:T2 low resistivity copper..
Check Stock

Mofeez Hammer Lug Crimper Tool for 8 AWG - 0000 AWG Battery and Welding Cables

  • WIRE GAUGE ----Crimps 8 gauge to 4/0 gauge connectors.8 AWG, 6 AWG, 4 AWG, 2 AWG, 1 AWG, 0 AWG, 00 AWG, 000 AWG, 0000 AWG..
  • PROFESSIONAL CRIMP----Ideal for battery and welding cables..
  • HIGH-STRENGTH IRON----Durable enough.No problems after thousands of beatings.Compact design and easy to carry..
  • EASY USE TIP---- Loading connector & cable then crimps with the aid of hammer.Recommend 2 to 4 lb sledgehammer,with a bigger hammer you don't have to hit it as many times.Also works well in a shop vise..
  • Full refund for any manufacture defective..
Check Stock

UTZIKO Hammer Lug Crimper Tool for 8 AWG - 0000 AWG Battery and Welding Cables

  • WIRE GAUGE ----Crimps 8 gauge to 4/0 gauge connectors.8 AWG, 6 AWG, 4 AWG, 2 AWG, 1 AWG, 0 AWG, 00 AWG, 000 AWG, 0000 AWG..
  • PROFESSIONAL CRIMP----Ideal for battery and welding cables..
  • HIGH-STRENGTH IRON----Durable enough.No problems after thousands of beatings.Compact design and easy to carry..
  • EASY USE TIP---- Loading connector & cable then crimps with the aid of hammer.Recommend 2 to 4 lb sledgehammer,with a bigger hammer you don't have to hit it as many times.Also works well in a shop vise..
  • Full refund for any manufacture defective..
Check Stock

Teansic 320 PCS Non-Insulated Ring Terminal & Fork Connector Kit, 22-12 AWG Wire Lugs Battery Cable Terminals Electric Pure Copper Crimp Connector

  • ...NDUCTIVITY-All SC ring terminal lugs (AWG 4 6 8 12-10)are made of tinned copper.The surface of the sc cable lugs is protected by tin plating for corrosion protection and fully annealed to ensure optimum ductility ,while providing a high degree of conductivity for maximum current flow..
  • ✔DURABILITY & RELIABLE-These battery cable lugs with heavy duty construction improves high temperature durability and 3:1 dual wall adhesive heat shrink tube well made of high quality material, thick and durable, which ensures its safe and reliable..
  • ✔CRIMPED and SOLDERED-These marine grade battery lugs can be crimped or soldered to the wire ends,each copper lugs with wire size identification on the lugs, so that you quickly find the right terminal, help you to finish the work faster and better..
  • ✔✔MULTI-WIRE GAUGE -Total 72pcs SC wire lugs (SC25-10 SC25-8 SC25-6 SC16-10 SC16-8 SC16-6 SC10-10 SC10-8 SC10-6 SC6-8 SC6-6 SC6-5 ) apply to AWG4 AWG6 AWG8 AWG12-10 wire gauge ,included 1/4" 3/8"and 5/16"#10 stud ,72pcs 3:1 dual wall adhesive heat shrink tube ,meet your different needs..
  • ✔WIDELY APPLICATION-Tinned Copper Eyelets Tubular Battery Lugs with Spy Hole are ideal for distribution boxes, marine, automotive, solar panels, home applications and outdoor application....
Check Stock

HerMia 20 Pack UL Heavy Duty Wire Lugs 1/0 AWG-1/2 1/0 AWG-3/8 Tubular Ring Terminals Connectors Battery Cable Ends Bare Copper Eyelets with 3 1 Dual Wall Adhesive Heat Shrink

  • Battery cable ends kits: 10pcs 1/0 AWG-1/2" copper Wire Lugs and 10pcs 1/0 AWG-3/8" copper Wire Lugs, 20pcs 3:1 heat shrink tubes (10 black and 10....
  • High Quality -- These battery lugs are made from 99.9% heavy duty T2 purple copper, which has excellent electrical conductivity and corrosion....
  • Closed-end Designed -- These copper ring terminals with UL standards are designed with closed ends to keep the cables dry and corrosion-free..
  • Wide Applications -- These 0 gauge wire connector are great for inverters, battery and automotive applications. Widely used in household appliances,....
  • Easy to Use -- These copper cable ends can be connected to an electrical cable such as a battery cable by crimping and soldering. The heat shrink tube....
Check Stock

XS Power BIG3-RD Upgrade Kit (XP FLEX, 1/0 AWG, 250A)

  • Replaces your vehicle's battery ground-to-chassis wire, the chassis-to-engine block wire, and the alternator charge output wire.
  • Ring terminals are already crimped to the wires.
  • Kit Contents: 1qty - 6ft 0AWG XP FLEX RD Cable, 2qty - 4ft 0AWG XP FLEX BK Ground Cable, 8qty - XS Power Brand Heat Shrink.
  • Kit contents: 8qty - 0AWG Crimp Terminals, 10qty - Wire Clamps, 10qty - Zip Ties, 10qty - Screws.
Check Stock

HobbyFly XT60 XT30 RC Lipo Battery Parallel Charging Board 2 in 1 Parallel Charging Plate XT30 XT60 Plug Supports 5 Packs for 2S-6S Lipo Battery

  • lipo battery parallel charging board supports XT60 connector and XT30 conector lipo battery.High quality with a-mass XT60 connector..
  • Supports up to 5 packs of the same type, same cells 2-6S battery pack（not include 5S）..
  • XT30 XT60 parallel charging board used for simultaneously charging multiple lithium batteries(including LiPo, LiFe, and Li-ion types).
  • Charge 5 lipo batteries at the same time when used with a balance charger,saving charging time.
  • With 2 types connector charge cable used for almost kinds of lipo balance charger，22AWG balance cable，14AWG main charge cable.
Check Stock

AMERICAN MUTT TOOLS 10 Inch Cable Cutters Heavy Duty Shears | Heavy Duty Wire Cutters for Copper and Audio Wire | Battery Cable Cutter Tool, Cable Cutters Electrical | Big Wire Cutters Heavy Duty

  • ...Built To Last: The 10 inch wire cutters heavy duty cutting heads undergo a specialty heat treatment process which allows these heavy gauge wire cutters to cut just as cleanly the 100th time as they did the 1st time..
  • Heavy Duty: Made from precision forged alloy steel, this battery cable cutters heavy duty tool works just as hard as you do. Our cable cutters electrical battery use compound leverage to allow you to slice through 2/0 AWG copper with just one hand..
  • Limited Lifetime Manufacturer Warranty: This battery cable cutter tool is backed by the American Mutt Tools Limited Lifetime Warranty for your complete peace of mind. Our heavy gauge wire cutter is professionally made in China..
Check Stock