Top Awesome Raspberry Pi Cases Reviews

Miuzei Raspberry Pi 4 Touchscreen with Case Fan, 4 inch IPS Touch Screen LCD Display, 800x480 HDMI Monitor for RPI 4b 8gb/4gb/2gb with Touch Pen (Support Raspbian/Kali/Octopi/Ubuntu)- No Raspberry Pi

  • Raspberry Pi 4 Touchscreen – Raspberry Pi 4 Inch IPS full-angle display monitor, 800 x 480 physical resolution support HDMI input, refresh rate up to 60fps..
  • Orange Pi Touchscreen – Miuzei raspberry pi 4 monitor support HDMI audio output, data entry (computer, DVD), HDMI audio input, stereo 3.5mm audio output..
  • Raspberry Pi 4 Screen Case – Pi 4 inch touch screen compatible with raspberry pi 4 b/4b/4 model b. Display ONLY Support System – Raspbian, Kali-linux, Ubuntu, Octopi..
  • Touchfunction Support System – only support Kali, Raspbian, Ubuntu, Octopie. The 4 inch display monitor with touch control function (need to install touch drive), we offer pre-install driver system image file. could be used as standard HDMI output device for computer display (no touch function)..
  • Packaging Content & After Sales – you will receive raspberry pi screen, raspberry pi heatsink, 30mm cooling fan, screwdrive, awesome looking, it can make your lcd display case looks cooler than others. if you encounter any problems, you can contact us at any time, and we will answer you..
Check Stock

UCTRONICS Fan Adapter Board for Raspberry Pi Upgraded Complete Enclosure and Raspberry Pi Cluster Case, Compatible with Raspberry Pi 3/3B+/4B, Output 5V Power

  • This fan adapter board is designed for Raspberry Pi desktop cluster cases and supports any Raspberry Pi motherboard with micro USB or USB C power..
  • With 4 pins on the adapter board, it can provide 5v power to two fans, which is the best way to power your fans when your Raspberry Pi GPIO is occupied by the PoE hat and keep your device cool at all times..
  • Plug and play: The fan adapter fits any 5V fans with an XH2.54 duplex connector. Simply plug the red wire of the fan connector into the positive and the black wire into the negative to run. Size:0.51*0.59 inch..
  • Compatible ASIN List: Raspberry Pi Complete Enclosure: B09JNHKL2N, B09S11Q684.
  • Raspberry Pi Cluster Case: B099RR1ZCT, B09K439BTY all are suitable for this fan adapter..
Check Stock

Raspberry Pi 4 Kits, CrowPi2 Raspberry Pi Laptop, Programming Kit for Professional, Kids, Adult - Deluxe Kit - Gray

  • This is the Crowpi2 deluxe kit, it contains Raspberry Pi 4B 8GB. Power bank not included..
  • Raspberry Pi Laptop --- CrowPi2 Deluxe Kit is a great kit for learning Raspberry Pi 4B. It can be used as a small personal computer to learn or advance one's programming skills with the lessons included and programming games..
  • All-in-one Board --- This electronic kit with 22 kinds of sensors and modules are all under one kit. Great for computer labs and classes that want to control a clean environment. It’s compact enough to put into a laptop case and take anywhere that you want to go..
  • Programming Kit --- Raspberry Pi learning kit will show kids how to start programming with Raspberry pi. 76 lessons and 20 creative projects are teach you how to start coding. Face recognition and speech recognition lessons will teach you how to build AI projects. Minecraft lessons and 18 small games for you to explore..
  • Excellent Build Quality --- Raspberry Pi kit is exceptionally well planned, designed and manufactured. Sleek body made out of environmentally-friendly material, 11.6 inch 1920*1080 resolution IPS screen, 2MP camera, stereo microphone, wireless keyboard and mouse, support 5v/12v dual working voltage..
  • STEM Education --- The Crowpi2 is an awesome educational pie....
Check Stock

Lanpu 30 PCS Raspberry Pi Heatsink Kit Copper Raspberry Pi Aluminum Heatsink for cooling cooler Raspberry Pi 3, Pi 2, Pi Model B+

  • Package includes 20 black anodized aluminum & 10 copper heatsink.
  • Suitable for Raspberry Pi models A, B, B+, 2, and 3 boards.
  • Can be applied with other devices for cooling VGA RAM, IC Chips, Mosfet SCR, Southbridge , Northbridge etc.
  • Adhesive thermal tape backing, Raspberry pi not included.
  • These heat sinks have profiles which are short enough to fit within standard Raspberry Pi cases..
Check Stock

MaticBox Case for Raspberry Pi 3 / Pi 2 / Tinker Board – Low Profile, Stackable, Universally Mountable DIN Rail, Automation Friendly, Fan Support (Black)

  • Featured here is a single case that can be configured for different applications. It is compatible with Raspberry Pi 2 Model B, Pi 3 Model B, Pi 3 Model B+, Asus Tinker Board (NOT compatible with Raspberry Pi 4). This is just a case, Raspberry Pi / Tinkers Board is NOT INCLUDED.
  • Can be mounted to flat surfaces, DIN rails, or to any object via zip ties.
  • Cases can be stacked to form clusters of single board computers.
  • Supports 25*25mm fans from 5mm to 10mm tall. Fans can be attached directly into the case body, or using the provided fan adapter (FAN NOT INCLUDED).
  • Comes with two covers – Low Profile cover when hosting just the single board computer and Automation cover for extra space when hosting extension boards with larger relays, terminals and connectors.
Check Stock

104 Pcs Raspberry Pi 4 Heatsink, MazerPi Raspberry Pi Heatsink Set Aluminum Heatsink with 3M 8810 Thermal Pad Copper Heatsink for Raspberry Pi 4 Model B/ 3B+/ 3B/ 2B

  • High Perfromance Raspberry Pi heatsink with Thermal Conductive Adhesive Tape..
  • Fits for Most of Raspberry Pi models, compatible with most Raspberry Pi cases..
  • 8810 Thermal conductive adhesive tape backing, good performance on heat dissipation and long lasting..
  • Also could be used with other devices such as the Beaglebone..
Check Stock

Servo Driver HAT 16-Channel 12-bit I2C Interface PWM Outputs for Jetson Nano Raspberry Pi Zero/Zero W/Zero WH/2B/3B/3B+/4B Supports SG90 MG90S MG996R etc @XYGStudy

  • Servo Driver HAT for Raspberry Pi, 16-Channel, 12-bit, I2C Interface.
  • Needless to say, the Raspberry Pi is powerful enough in most cases, yet it's not that good at providing precise PWM output. You may have tried to....
  • Standard Raspberry Pi 40PIN GPIO extension header, compatible with Raspberry Pi Zero/Zero W/Zero WH/2B/3B/3B+/4B and later version, Jetson Nano.
  • I2C controlled, using only 2 pins Standard servo interface, supports common used servo such as SG90, MG90S, MG996R, etc..
  • Up to 16-Channel servo/PWM outputs, 12-bit resolution for each channel (4096 scales).
Check Stock

Pastall 100 PCS (8 Different Sizes) Heatsink Kit with Conductive Adhesive Tape, Aluminum Heat Sink Cooler and Copper Heatsink for Raspberry Pi A B B+ 2/3/4

  • ❤ The 100 PCS (8 Different Sizes) heatsink kit with conductive adhesive tape, Easy to use and could effectively provide good heat dissipation..
  • ❤ As a Raspberry Pi heat sink (using as raspberry pi 4 heatsink/raspberry pi 3B+ heatsink), it has good heat dissipation performance and compatible with most Raspberry Pi cases..
  • ❤ The heat sink is equipped with high-performance thermal conductive adhesive, high viscosity, durable and long lasting..
  • ❤ This small heatsink kit included : 80 pcs aluminum heatsink + 20 pcs copper heatsink( It Contains 8 different sizes of heat sink,Please check the specific size on the picture)..
  • ❤ the heatsinks also could be used for Cooling Development Board Laptop CPU GPU VGA RAM VRAM VRM IC Chips LED MOSFET Transistor SCR Southbridge Northbridge Voltage Regulator.It is an excellent heat sink for heat dissipation in electronic DIY,You will love it!.
Check Stock

Sony PSP-2000LP PlayStation Portable Slim and Lite - Purple

  • ✅ Fully Loaded Game System Raspberry Pi 4 Retro Game Console. We have further developed the Raspberry Pi 4 and it is now very complete. We reduced its size and added the appearance of a PS1 retro game console. In addition, the controller has been further improved, a very awesome controller, everyone likes it. In the UK, it has won everyone's approval, and it is currently the most well-developed Raspberry Pi..
  • ✅ All your favorite consoles and arcades! From SNES, GENESIS, N64, PS1, Dreamcast and many more!.
  • ✅ 32GB Micro SD Card - Retropie Installed and Loaded with your favorite games and consoles.
  • ✅ Fully Plug and Play - HDMI Cable, Power Cable and 2 Wired Controllers Included.
  • ✅ PS1 Retro Game Console Appearance - Includes 2 Classic USB PS1 Style Gamepads and PS1 Case with ease of access to all Ports..
Check Stock

128gb Micro SD Card for The Raspberry Pi with 117,000 Retro Retropie Games Ready to Play

  • Over 110k titles! Overclock: CPU 1950mhz / GPU 700mhz (Best stable overclock).
  • For Raspberry Pi 4 and Pi 400. Message me if you have a Pi 3/3B+ and I will ship you the Pi 3 version..
  • Just plug it into your Raspberry Pi and you are ready to go! This is a new SD card build, so any questions/answers below that are prior to 7/24/22 do....
  • The very best mid-sized build with awesome retro splash screen videos, Screen Shots/Cover Art, Bezels on Arcade & NeoGeo, Sinden Drivers....
  • We have years of experience with Retropie, Batocera, and PC retro-gaming platforms and we are dedicated to providing the very best retro-gaming....
Check Stock

UCTRONICS PoE HAT for Raspberry Pi 4B, IEEE 802.3af-Compliant, 5V 2.5A Mini Power Over Ethernet Expansion Board for Raspberry Pi 4 B 3 B+

  • Improvement: Based on the original U6109, we have improved the device compatibility to be compatible with more brands of switches.
  • also compatible with non-standard 48v power supply (only through 45+, 78-).
  • PoE input 40-57V with multiple protection circuits..
  • Designed For RPi 4 and 3 B+: This PoE HAT can be used to deliver clean and reliable power to the raspberry pi 3 model B+ and raspberry pi 4 model B (not included)..
  • Mini-Size: Nearly half the official size, does not occupy the GPIO pins of Raspberry Pi, saving more space for your other hardware, while still being able to be housed in most Raspberry Pi cases..
  • Well-ventilated Environment Recommended: It’s normal to become hot when the HAT operates. Please make sure the adequate air circulation to help it dissipate heat to ensure stable operation..
Check Stock

HiFiBerry HighPi Raspberry Pi Case - Raspberry Pi4

  • Rapid, Tool-Free Assembly - The HighPi case sets the standard for ease of use and versatility in Raspberry Pi cases. Installing or removing the Raspberry Pi PI4 board is astonishingly quick, simple, and secure.
  • all without tools or assembly. One snap action locks the Pi board into the case.
  • the second secures the lid, rattle free. Remove the Pi board and the lid with one-finger-releases for each. Genius!.
  • Fits All Kinds of Hats - Whether you’re running a plain Pi4 board or modding it to the max, the HighPi case has your Pi covered. Generous internal room allows HATs, break-out boards, or heat sinks. Vents on three sides double as fly-through cable ports for the GPIO and whatever else you need to connect to. Supports PI POE Hat, HiFiBerry Hats, Serial Hat, UPS HAT and more!.
  • The HighPi case can be wall mounted horizontally with two screws for easy removal, or mounted in any orientation including upside-down with four screws from inside the case (Screws not included). When wall mounted horizontally, the A/V and audio cables hang downward from the Pi, improving visual tidiness and reducing the need for support of heavy cables..
  • High quality ABS plastic case, designed and made in Canada, Large internal volume for HATs, break-out boards, or heat sinks, Ven....
Check Stock

Seeed Studio ReSpeaker 4-Mic Array for Raspberry Pi, Raspberry Pi Microphone

  • ReSpeaker 4-Mic Array for Raspberry Pi（Pi 3/Pi 4 B +) is a 4 microphone expansion board for Raspberry Pi designed for AI and voice applications. This means that you can build a more powerful and flexible voice product that integrates Amazon Alexa Voice Service, Google Assistant, and so on..
  • Different from ReSpeaker 2-Mics Pi HAT, this board is developed based on AC108, a highly integrated quad-channel ADC with I2S/TDM output transition for high definition voice capture..
  • Besides, this 4-Mics version provides a super cool LED ring, which contains 12 APA102 programmable LEDs.With that 4 microphones and the LED ring, Raspberry Pi would have ability to do VAD(Voice Activity Detection), estimate DOA(Direction of Arrival) and show the direction via LED ring, just like Amazon Echo or Google Home..
  • This Raspberry Pi microphone support all Raspberry Pi models, including Raspberry Pi Zero, Raspberry Pi 1 B+, Pi 2 B, Pi 3 B, Pi 3 B+，Pi 4 B..
  • ReSpeaker 4-Mic array does not have audio output. If this is a requirement please consider the ReSpeaker 6-Mic Circular Array Kit For Raspberry Pi, the ReSpeaker 4-Mic Linear Array Kit for Raspberry Pi , or the ReSpeaker Mic Array v2.0..
Check Stock