Top Automation And Control Piston Hydraulic Cylinder Reviews

uxcell UN Radial Shaft Seal 20mm ID x 26mm OD x 5mm Width PU Oil Seal, Blue Pack of 2

[Size] - 20mmx26mmx5mm Y-shape 90A mechanical seal for piston and piston rod.
[Operation Range] - Working Speed: Less than 0.5m/s.
Working Temperature Range: -35°C to 100°C (-31°F to 212°F).
[PU Material] - Oil resistance, wear resistance, low-temperature resistance, aging resistance, high hardness, elasticity.
[Advantage] - Widely used in the hydraulic cylinder to prevent dust, dirt, sand, and metal debris from entering, and easy to install.
[Application] - Applied to industrial hydraulic cylinders and cylinders, hoists, moving rods of guide rods, and piston rods (pull rods), and pistons (one-way piston seals) in static pressure.

Check Stock

uxcell UN Radial Shaft Seal 20mm ID x 26mm OD x 5mm Width PU Oil Seal, Blue Pack of 10

[Size] - 20mmx26mmx5mm Y-shape 90A mechanical seal for piston and piston rod.
[Operation Range] - Working Speed: Less than 0.5m/s.
Working Temperature Range: -35°C to 100°C (-31°F to 212°F).
[PU Material] - Oil resistance, wear resistance, low-temperature resistance, aging resistance, high hardness, elasticity.
[Advantage] - Widely used in the hydraulic cylinder to prevent dust, dirt, sand, and metal debris from entering, and easy to install.
[Application] - Applied to industrial hydraulic cylinders and cylinders, hoists, moving rods of guide rods, and piston rods (pull rods), and pistons (one-way piston seals) in static pressure.

Check Stock

uxcell UHS Radial Shaft Seal 12mm ID x 20mm OD x 5mm Width PU Oil Seal, Blue Pack of 10

[Size] - 12mmx20mmx5mm Y-shape 90A mechanical seal for piston and piston rod.
[Operation Range] - Working Speed: Less than 0.5m/s.
Working Temperature Range: -35°C to 100°C (-31°F to 212°F).
[PU Material] - Oil resistance, wear resistance, low-temperature resistance, aging resistance, high hardness, elasticity.
[Advantage] - Widely used in the hydraulic cylinder to prevent dust, dirt, sand, and metal debris from entering, and easy to install.
[Application] - Applied to industrial hydraulic cylinders and cylinders, hoists, moving rods of guide rods, and piston rods (pull rods), and pistons (one-way piston seals) in static pressure.

Check Stock

uxcell UN Radial Shaft Seal 12mm ID x 22mm OD x 5mm Width PU Oil Seal, Blue Pack of 5

[Size] - 12mmx22mmx5mm Y-shape 90A mechanical seal for piston and piston rod.
[Operation Range] - Working Speed: Less than 0.5m/s.
Working Temperature Range: -35°C to 100°C (-31°F to 212°F).
[PU Material] - Oil resistance, wear resistance, low-temperature resistance, aging resistance, high hardness, elasticity.
[Advantage] - Widely used in the hydraulic cylinder to prevent dust, dirt, sand, and metal debris from entering, and easy to install.
[Application] - Applied to industrial hydraulic cylinders and cylinders, hoists, moving rods of guide rods, and piston rods (pull rods), and pistons (one-way piston seals) in static pressure.

Check Stock

uxcell UHS Radial Shaft Seal 20mm ID x 28mm OD x 5mm Width PU Oil Seal, Blue Pack of 2

[Size] - 20mmx28mmx5mm Y-shape 90A mechanical seal for piston and piston rod.
[Operation Range] - Working Speed: Less than 0.5m/s.
Working Temperature Range: -35°C to 100°C (-31°F to 212°F).
[PU Material] - Oil resistance, wear resistance, low-temperature resistance, aging resistance, high hardness, elasticity.
[Advantage] - Widely used in the hydraulic cylinder to prevent dust, dirt, sand, and metal debris from entering, and easy to install.
[Application] - Applied to industrial hydraulic cylinders and cylinders, hoists, moving rods of guide rods, and piston rods (pull rods), and pistons (one-way piston seals) in static pressure.

Check Stock

Maxim WSB Swivel Ball Welded Cylinder - Double Acting Hydraulic Cylinder 1.5” Bore x 12” Stroke, 0.75” Pin & 1” Rod Diameter, 19.25” Retracted, 3000 PSI, 5300 lb Column Load, SAE 6 Port Size, 10 lb

SPECIFICATIONS: This universal hydraulic cylinder is double-acting with a 1.5” bore, 12” stroke length, 0.75” pin and 1” rod diameter. 19.25” Retracted, 31.25” Extended. It offers a maximum working pressure of 3000 PSI, has 5300 lb column load capacity, and SAE 6 port size..
PRECISE PERFORMANCE: Our hydraulic cylinder delivers error-free performance in compact and mobile equipment. The heavy-duty piston seals rule out leaks for consistent performance in heavy load applications..
HIGHLY RELIABLE: This heavy-duty double-acting hydraulic cylinder with swivel ball mounts is superior in design compared to other hydraulic cylinders. It provides reliable performance in complex applications requiring up to 3000 PSI..
BUILT TO LAST: Our welded cylinder withstands high-temperature differences and is corrosion resistant. It has a compact and lightweight design and its welded barrels provide strength and stability to its form and functioning..
CUSTOMIZABLE: Our swivel ball hydraulic cylinder can be customized per OEM requirements. It offers 1-inch to 3 inches bore sizes and stroke lengths that can go up from 4 inches to 36 inches for greater convenience and faster action..

Check Stock

uxcell UHS Radial Shaft Seal 11.2mm ID x 19.2mm OD x 5mm Width PU Oil Seal, Blue Pack of 5

[Size] - 11.2mmx19.2mmx5mm Y-shape 90A mechanical seal for piston and piston rod.
[Operation Range] - Working Speed: Less than 0.5m/s.
Working Temperature Range: -35°C to 100°C (-31°F to 212°F).
[PU Material] - Oil resistance, wear resistance, low-temperature resistance, aging resistance, high hardness, elasticity.
[Advantage] - Widely used in the hydraulic cylinder to prevent dust, dirt, sand, and metal debris from entering, and easy to install.
[Application] - Applied to industrial hydraulic cylinders and cylinders, hoists, moving rods of guide rods, and piston rods (pull rods), and pistons (one-way piston seals) in static pressure.

Check Stock

Office Chair Gas Lift Cylinder-Office Chair Replacement Parts, Heavy-Duty Gas Lift Cylinder Fits Most Chairs,Highest End Class 4 Hydraulic Pneumatic Piston,Universal Size

STANDARD SIZE OFFICE CHAIR CYLINDERS REPLACeMENT: This chair cylinder replacement will fit all office chair bases with 50mm(2 inches) standard centre hole. Ideal to replace hydraulic piston on 99% standard office chairs, task chairs, executive chairs, salon chairs and rolling stools on the market. SAVE MONEY - to fix your sinking office chair by replacing the chair gas cylinder instead of spending hundred bucks for a brand new computer chair. ( Please measure dimensions before purchasing ).
HEAVY DUTY CLASS 4 PISTON - STRONGEST ON THE MARKET: Our gas lift cylinder passed the top-level test of BIFMA and TUV certification, the highest End Class 4 chair piston on market, which are known as the most durable, longest lasting, and highest quality gas lift cylinders, they can lift up and down 120,000 times without fail and can be support up to 1000lbs..
4.7’’ PISTON STROKE FOR ADJUSTING CHAIR HEIGHT: This chair piston extends from 264mm to 385mm ( 10.39 - 15.15"), minimum length: 10.39 inches.
maximum length when fully extended: 15.15 inches, travel from the highest to the lowest point, replace your office chair gas cylinder and stop worrying about disturbing anyone, 360 degree rotation to all directions, freely lift and rotate your office chair....

Check Stock

VEVOR Double Acting Hydraulic Cylinder 2'' Bore, Top Link Hydraulic Cylinder 10'' Stroke, Retracted 18\ Extended 26 Hydraulic Side Link Swivel Eye Bearing w/Check Valve for Tractors, Category 1, 2

High Tensile Steel Structure: This hydraulic lifting cylinder is a welded double acting cylinder. It has a high tensile honed cold drawn hydraulic tube, a polished piston rod, and sturdy threaded glands. With bearing design on base ends. Carbon steel construction ensures its longevity and features a max 6700 lbs pushing force and 4500 lbs pulling force..
2"-2.5" Bore 10" Stroke Top Link: The top link cylinder is built under specific dimensions. Bore: 2"-2.5". Stroke Length: 10". Rod Size: 1". Pin Size: 0.8". With retracted min length 20" and extended max length 28". Double Pilot Check Valve Port Size: G3/8. Max Pressure: 5076PSI. Max Flow Rate: 20 L/ min. Opening Pressure: 50.76 PSI..
Swivel Eye Bearing Design: There is a spherical swivel eye bearing design on both ends. Due to the sturdy and flexible bearings, you can quickly fix and install the cylinder on your tractors or min excavators. Joint Bearing Width: 2". Thickness 0.8". Durable enough to hold a lot of force..
With Check Valve & Fully Tested: The well-assembled and thoroughly tested tractor top link hydraulic cylinders also come with a double pilot operated check valve to help hold the cylinder and prevent drift. The assembled inside sealing rings guard the high performance of sealing, accessi....

Check Stock

DAJAVE 2 Pack 5.5 Inch Office Chair Cylinder Replacement, Office Chair Gas Lift Cylinder, Hydraulic Pneumatic Shock Piston Heavy Duty(1000lbs) Universal Size Fits Most Executive Chairs

[2Pcs Gas Lift Cylinders] You will get 2 office chair cylinder replacement to fix your sinking office chair by replacing the cylinder instead of spending hundred bucks for a new computer chair.
This hydraulic piston is suitable for almost all office chairs (salon chairs, work chairs, executive chairs, rolling stools)..
[1000lbs Office Chair Cylinder] The office chair piston maximum weight it supports is 1000Lbs, which is much heavier than an ordinary gas cylinder for office chair..
[11.8" to 17.4" Long Adjustable Gas Lift Cylinder] Minimum length: 11.8 inches.
maximum length when fully extended: 17.4 inches.
adjustable range: 5.5 inches, Load capacity: 1000lbs.
Office Chair Cylinder Replacement: Full 360 degree rotation, smooth and noiseless movements to all directions. You can use this chair cylinder replacement for your office chair, gaming chair, desk chair and swivel chair etc..
Easy To install: This office chair cylinder is relatively simple to install,and can be installed easily with no additional screws required..

Check Stock

CGELE Pneumatic Air Cylinder SC 32 x 200mm PT 1/8, Bore: 1 1/4 inch（32mm）,Stroke:8 inch(200mm) Screwed Piston Rod Dual Action

♥Material:Made of high precision aluminum alloy..
♥Each package includes 1 pcs pneumatic air cylinder(SC32×200)，1 pcs Y-joint ,2 pcs PC4-01,pneumatic tubing 5 meter(4×2.5),1 pcs teflon tape..
♥Product parameters:Port size: PT 1/8,piston rod size:M10X1.25,Bore: 1 1/4 inch(32mm), Stroke: 8 inch(200mm)..
♥Feature:New aluminum alloy material, thickened cylinder, surface electroplating treatment, high strength, not deformed, not easy to corrosion, with fine double seal ring, good sealing, long time smooth not jamming not leak, wear-resistant dust..
♥Widly application:Widely used in printing , semiconductor, automation control, robotics, etc..

Check Stock

Enerpac - RC102 RC-102 Single-Acting Alloy Steel Hydraulic Cylinder with 10 Ton Capacity, Single Port, 2.13\ Stroke

Single-acting hydraulic cylinder with one port and pretensioned spring return of piston rod after 2.13" stroke.
Round body with single piston rod for use in general purpose applications in any position.
High-strength alloy steel with baked enamel finish for corrosion resistance.
10-ton cylinder capacity for lifting or pushing.
Quick-connect CR-400 female coupler for connection to a CH-604 male coupler (sold separately).

Check Stock

Bonvoisin 10T Hydraulic Cylinder Jack Porta Power Mini Hydraulic Ram Multi-Acting Low Profile Lifting Cylinders for Machinery Shipbuilding (Cannot Retract Automatically)

[Ultra-thin & Portable] - This hydraulic cylinder is portable, small in size, but strong in load-bearing capacity, which is especially suitable for lifting and supporting work in narrow spaces..
[Note] - After the pressure is relieved, the piston of the jack ram CANNOT retract by itself! You must use gravity to press the jack to retract, which is not a quality problem..
[Used with Pumps] - The porta power should be used with hydraulic pumps. The 10T/20T can be used with CP-180 hydraulic pump (ASIN: B08QTXY2D2)..
[Wide Applications] - This hydraulic jack can be widely used in power, chemical, steel, bridges, shipbuilding, machinery and other industries! However, it does NOT apply to cars..
[One-year Warranty] - Within one year of purchase, if something goes wrong with the cylinder jack, you can replace it for free..

Check Stock