Top Automatic Sump Pumps Reviews

Sump Pump Alarm & Protector – Monitors Your Pump Energy (HP) and Cuts Off When Dry Run, Overload or Stuck On Float Switch Detected – Works w/Out Water Level Sensors as in/Outdoor IP64 WiFi Plug

  • LESS WORRY & MORE FUN – Monitor your pump from anywhere via Wi-Fi smartphone app – no need to rush to the basement to check on it.
  • SAVE ON ELECTRIC BILL – Why Is Your Sump Pump Endlessly Running? – Get the WiFi sump pump alarm and prevent the pump burnout when the float switch is stuck in “On” position or pump is obstructed.
  • KEEP YOUR BASEMENT DRY – Get push notification alerts if there is a power outage or pump failure.
  • DETECT & PREVENT COSTLY PUMP DAMAGE – The pump protector extends your sump pump life by sensing unusual load on the pump motor and stopping the pump before an expensive breakdown happens.
  • WIDE RANGE OF APPLICATIONS – It works great with any 1/6HP to 1HP 125VAC sump pumps, submersible pumps, sewage/effluent pumps, utility pumps, water well pumps etc.
Check Stock

Red Lion 599304 Sump Pump Discharge Hose Kit, 24-Feet

  • Compatible with sump pumps with 1-1/4 inch FNPT or 1-1/2 FNPT discharge. Not compatible with garden hose fittings..
  • Includes 24-foot corrugated polyethylene hose, ABS thread x barbed adapter and galvanized steel clamp.
  • Ideal for discharging water out of basement sump to a safe location outside of the home.
  • Can be attached to pump for emergency applications.
Check Stock

Wayne WSSM40V 1/2 hp Combination Primary and Backup Sump Pump System

  • 120 volt primary pump - 1/2 hp pumps up to 4200 gph at 0'.
  • Tested to 1 million cycles* (Primary only). Integrated vertical float switch with solid, leak free polypropylene float for automatic operation, 9 inch ON level and 4 inch OFF level.
  • Primary pump's top suction design filters debris and minimizes clogging.
  • Alarm system, with status indicator lights, lets homeowner know when back-up system is active.
  • Designed for 15" diameter or larger sump basins.
  • 12 volt back-up pump pumps up to 3300 gph at 0'.
Check Stock

PumpSpy Threaded Quiet Sump Pump Check Valve with 100% Stainless Steel Clamps Included - Threads Directly into the Pump's 1-1/2" NPT Discharge to Connect it to a 1-1/2" Pipe - Model CV-150T

  • ...hat'll last for a long time. The use of stainless steel hose clamps prevents rust and corrosion for a secure, leak-proof connection..
  • PRE-DRILLED WEEP HOLE: The pre-drilled weep hole of our pump sump check valve eliminates the air lock that may occur in bottom suction pumps. Our “full-flow” check valves prevent the water that remains in the sump discharge pipe from falling back into the sump pit. This avoids pumping of the same water twice, extending the life of your pump..
  • WHY PUMPSPY: The United States is home to PumpSpy's assembly facility. Our pumps are designed to be highly durable and provide dependable usage over many years. Our products are shielded from rust, corrosion, and leakage as we've designed our sump pumps to get the most out of your pump's performance..
Check Stock

Float Switch for Sump Pump - 6-Foot Water Level Sensor with Honeywell Microswitch and Adjustable Tether Length for Ground Water Bilge Pump and Water Tank – Non-Corrosive PP Casing, Rated to 13 Amps

  • CONTROL WATER FLOW into and out of tanks and valves with a sump pump float switch by Water Boss. This float level switch helps reduce overflow potential of light to medium amounts of suspended solids..
  • HONEYWELL MICRO SWITCH ensures a high-precision sump pump switch with accurate repeatability and extended life. This water sensing switch is rated up to 13 amps or 1/2 HP and has CE and IEC approvals..
  • NON-CORROSIVE CASING of the Water Boss Float for water tanks and bilge pumps is IP68 rated. Rugged polypropylene construction also makes this water level switch temperature-resistant from 32°F to 140°F..
  • ADJUSTABLE TETHER of its 6-foot PVC jacketed cable makes our automatic bilge switch suitable for an array of applications. Eliminate complex automation with this sump pump replacement float switch..
  • 5-YEAR WARRANTY against manufacturer defects lets you select the Water Boss Sump Pump Float Switch Replacement with confidence. This reliable float switch yields big savings in flood repair costs..
Check Stock

Float Switch for Sump Pump - 10-Foot Water Level Sensor with Honeywell Microswitch and Adjustable Tether Length for Ground Water Bilge Pump and Water Tank – Non-Corrosive PP Casing, Rated to 13 Amps

  • CONTROL WATER FLOW into and out of tanks and valves with a sump pump float switch by Water Boss. This float level switch helps reduce overflow potential of light to medium amounts of suspended solids..
  • HONEYWELL MICRO SWITCH ensures a high-precision sump pump switch with accurate repeatability and extended life. This water sensing switch is rated up to 13 amps or 1/2 HP and has CE and IEC approvals..
  • NON-CORROSIVE CASING of the Water Boss Float for water tanks and bilge pumps is IP68 rated. Rugged polypropylene construction also makes this water level switch temperature-resistant from 32°F to 140°F..
  • ADJUSTABLE TETHER of its 10-foot PVC jacketed cable makes our automatic bilge switch suitable for an array of applications. Eliminate complex automation with this sump pump replacement float switch..
  • 5-YEAR WARRANTY against manufacturer defects lets you select the Water Boss Sump Pump Float Switch Replacement with confidence. This reliable float switch yields big savings in flood repair costs..
Check Stock

Little Giant 14942771 Cast Iron Sump Pump System with 10-Foot Power Cord

  • Pre-assembled piping and check valves included.
  • 1-1/2 inch FNPT discharges, piggyback float switches.
  • Clog-resistant design (1/2" semi-solids handling), PSC motors, not suitable for pond use.
Check Stock

Diesel Fuel Systems (Mechanics and Hydraulics): Construction Equipment, Multiple Pump, Unit Injector, Roosa Master Distributor, Pressure-Timed, System Components, Repair, Replacement, Pumps, Filters

  • Includes by-pass float switch for automatic or manual operation.
  • Powerful motor with automatic thermal overload protection.
  • Easy installation - replaces pedestal or submersible sump pumps.
Check Stock

1\ Commercial Grade Heavy Duty Garden Hose - THE HOSE by Aeromixer (100)

  • 1" Hose with Heavy duty 1" brass end couplings.
  • Constructed from 1/4" double-walled braided nylon.
  • Attaches directly to your Aeromixer, and most sump pumps.
  • Comes with an adapter for 1.5" NPT (Most sump pumps are 1.5" NPT).
Check Stock

THE BASEMENT WATCHDOG Model BWU033PAS 1/3 HP 2,200 GPH at 0 ft and 1,440 GPH at 10 ft Submersible Utility Pump with Automatic Switch

  • Pumps 1,842 GPH at 5-ft lift to quickly drain window wells or other low areas that can collect water.
  • Automatic - turns on when water is 1-3/4 inches deep and pumps down to 1/4 inch.
  • Multi-purpose 45 degree angle adapter fitting connects to garden hose or 1-1/4 in. flexible sump pump discharge hose.
  • Removable intake screen for easy cleaning of debris.
Check Stock

Superior Pump 92551 1/2 HP Cast Iron Pedestal Pump

  • 1/2 HP Sump pump moves up to 3600-gallons per hour.
  • Will handle liquids up to 180-degrees Fahrenheit.
  • Rugged stainless steel and cast iron construction.
  • Non-corrosive, solid steel drive shaft, float ball, and impeller.
  • Features: Fully adjustable automatic switch, Metal switch arm for strength and durability, 10-foot power cord, cULus Listed, CSA Certified.
  • Superior Pumps are Built to Last, engineered with quality components and are 100% factory tested.
Check Stock

PumpSpy Dual Pump Install Kit - Double Sump Pump Connection, Basement Water Pump Backup Y-Connector - Sump Pump Submersible Backup Connector To Single Discharge Line - Dual Pump System To 1-1/2' Line

  • EASY INSTALLATION: Installing a backup sump pump can be tedious but not with the PumpSpy Dual Pump Install kit! This kit comes with everything you need to connect 2 sump pumps together to a single discharge line. All you’ll need for the process is a standard screwdriver. Install your pumps in a fraction of the time..
  • IDEAL SAFEGUARD SYSTEM: A flooded basement can cost thousands of dollars in damages. The best way to protect yourself from this kind of disaster is with a backup sump pump. This dual water pump installation kit makes it easier for you to install a backup system to avoid what could potentially be a major inconvenience..
  • HASSLE-FREE SET UP: There’s no cutting or gluing required during installation with this dual pump backup installer kit. Everything you need to connect a back up sump pump is in the box. There’s no need to purchase a PVC pipe, elbows, couplings and cement. Say goodbye to messy, laborious installations!.
  • WHAT’S IN THE BOX: This kit contains a Y-Connector, Two (2) 1-1/2″ Threaded Silent Check Valves, Stainless Steel Clamps and Buna-N Rubber Couplings. The only thing you’ll need to put everything together is a standard screwdriver. This kit is compatible with all pumps that have a standard 1-1/2″ NPT pump discharge/....
Check Stock

Eshopps ES89134 Reef Sumps RS-100 75-100 Gallon

  • Convenient sump for enhanced reef aquarium filtration..
  • Reef sump increases aquarium water volume for stable parameters..
  • Install protein skimmers and other aquarium filtration devicesEshoppsVersatile sumps designed for today's.
  • Eshopps Reef Sumps feature ample, usable sump area to accommodate protein skimmers, pumps,.
  • Open-top design allows easy access for convenient equipment maintenance..
Check Stock