Top Automatic Rebar Bending Centre Reviews

VEVOR Hydraulic Rebar Bender, 1700W, Electric Rebar Bender and Cutter, 1''/25 mm Max Rebar Diameter, Rebar Steel Bender and Cutter Machine, Bending Machine For Bending Rebar, Steel Bar, Steel Rod

  • Ultra-Fast Working Speed: This rebar bender and cutter machine is designed with excellent performance. It helps save valuable person-hours by bending rebar 1/4'' #2 to 1" #8 Grade 60(6 to 25 mm) within 6 to 7 seconds. It can also cut rebar within 5-6 seconds. Bending Angle: 0-180°. Bending Radius: 1.57'' / 40 mm, Max. Rebar Hardness: HRC30, Hydraulic Oil Type: VG46..
  • 1700W Pure Copper Coil Motor: This rebar cutter and bender features a 1700W pure copper motor, which can run quietly with low noise and significantly improve your working efficiency, reducing unnecessary wear. Besides, a copper motor can extend this rebar bender cutter's operating life to a large extent. Voltage: 110V, Frequency: 60 Hz, Amps: 14A, Noise: 92 dB(A)..
  • Angle Adjustment Knobs: This rod bending machine has two slide-type angle selectors, which can help you accurately bend any angle from 0-180 degrees. Preset angle locks are designed for repeating the same angle bending. When bending processing, the angle of point 1 must be bigger than point 2. Otherwise, the machine can not operate normally..
  • Sturdy Machine Body: The bar bender machine adopts a sturdy iron machine body and durable Idler Wheel. Ø78 iron Gyre Idler Wheel and Ø94 Fixed Idler Wheel are stronger and not easy t....
Check Stock

VEVOR Hydraulic Rebar Bender 1700 Wattage Electric Rebar Bender and Cutter, 1''/25 mm Max Rebar Diameter, Rebar Steel Bender and Cutter Machine, Bending Machine For Bending Rebar, Steel Bar, Steel Rod

  • Ultra-Fast Working Speed: This rebar bender and cutter machine is designed with excellent performance. It helps save valuable person-hours by bending rebar 1/4'' #2 to 1" #8 Grade 60(6 to 25 mm) within 6 to 7 seconds. It can also cut rebar within 5-6 seconds. Bending Angle: 0-180°. Bending Radius: 1.57'' / 40 mm, Max. Rebar Hardness: HRC30, Hydraulic Oil Type: VG46..
  • 1700W Pure Copper Coil Motor: This rebar cutter and bender features a 1700W pure copper motor, which can run quietly with low noise and significantly improve your working efficiency, reducing unnecessary wear. Besides, a copper motor can extend this rebar bender cutter's operating life to a large extent. Voltage: 110V, Frequency: 60 Hz, Amps: 14A, Noise: 92 dB(A)..
  • Angle Adjustment Knobs: This rod bending machine has two slide-type angle selectors, which can help you accurately bend any angle from 0-180 degrees. Preset angle locks are designed for repeating the same angle bending. When bending processing, the angle of point 1 must be bigger than point 2. Otherwise, the machine can not operate normally..
  • Sturdy Machine Body: The bar bender machine adopts a sturdy iron machine body and durable Idler Wheel. Ø78 iron Gyre Idler Wheel and Ø94 Fixed Idler Wheel are stronger and not easy t....
Check Stock

VEVOR 1.5KW Electric Rebar Bender, 1''(25mm) Hydraulic Electric Hand Held Rebar Bender & Happybuy Electric Rebar Cutter, 1.7KW 110V Electric Hydraulic Rebar Cutter

  • Product 1: 0 - 90 Degrees Excellent Performance: This electric rebar bender is designed with excellent performance. It helps save valuable person-hours by bending rebar 1/4'' to 1" (6 to 25 mm) within 5 seconds. 1/4'' / 6 mm #2 Rebar(0-55°), 1'' / 25 mm #8 Rebar(0-90°). It is able to satisfy your various bending demands..
  • Product 1: 1500W Pure Copper Coil Motor: This portable rebar bender features a 1500W pure copper coil motor, which can run quietly with low noise and significantly improve your working efficiency, reducing unnecessary wear. Besides, a copper motor can extend this rebar bending machine's operating life to a large extent..
  • Product 1: Sturdy Machine Body & Head: The electric bender machine adopts the sturdy machine body and high-intensity hook, which are stronger and not easy to break. It can stand super-hard rebar with strong clamping force, which can help to reduce steel rebar waste. Multiple screws fixed on the head enforce the stability and sealing..
  • Product 1: Precision Pressure Relief Valve: This hydraulic rebar bender features a precision pressure relief valve and a hydraulic-powered piston for strong thrust and less power consumption. After the steel bar is successfully bent, you can pull the pressure relief valve to move the st....
Check Stock

Huanyu Electric Rebar Bender 900W Hydraulic Rebar Bending Machine 5/8Inch #5 16mm Rebar within 5s Bending Angle 0°-130° with Positioning Bolt Fast Easy Bending Rebar Steel Bar Steel Rod 110V RB-16

  • 【Powerful 900W Pure Copper Motor】Huanyu Electric Rebar Bender adopts 900W pure copper motor with strong power. It can bend 5/8inch (#5 16mm) rebar 0-130° within 5s. Low noise and low failure rate when running. Longer service life..
  • 【Solid Machine Body】Huanyu Rebar Bending Machine adopts sturdy cast iron body and high-strength bend block, stronger clamping force for excellent bending of rebar. Multiple screws fixed on the head enhance the safety and stability of the rebar bender..
  • 【Easy to Operate】One button operation. Keep the switch pressed and the bending block starts to push forward. Huanyu Steel Bender is equipped with an adjustable positioning bolt. You can mark on it to control the rebar bending angle. After the rebar is bent, pull the relief valve and piston returns to its original position..
  • 【Humanized Design】Ergonomically designed rear handle and side handle (detachable) for comfortable grip and easy operation. Integral workbench base design. You can lay the bender on a flat surface to operate. Stable and effortless. Save your back!.
  • 【Excellent Service】NOTE: We support customized service of 220V voltage to meet your needs.1 year warranty on all products in our store. For damaged parts, we will resend a new one free of charge....
Check Stock

Metabo HPT Rebar Bender and Cutter | Electric | Up to #5 Grade 60 Rebar (3/8', 1/2', 5/8') | Variable Speed Trigger | Lightweight and Portable | 5-Year Warranty | VB16Y

  • MOTOR: 8-Amp motor with intense power (530W).
  • TRIGGER: Variable speed trigger with safety lock provides manual-like precision and control over the bending speed.
  • APPLICATIONS: Uniformly bends up to no. 5 (3/8", 1/2", 5/8") grade 60 rebar at a maximum angle of 180 degrees.
  • FAST BENDS: Precision angle bends are preset and completed in just seconds (cut: 3. 1 seconds, bend: 5. 1 seconds) for consistency.
  • PRESET DIAL: With the turn of a pre-set dial, bends can be made in a variety of angles.
  • COMPACT: Extremely low profile design (18. 4" L x 8. 5" H x 9. 1" W), yet extremely stable.
  • LIGHTWEIGHT: Only 42 Lb., makes it portable and maneuverability for ease of use on any jobsite.
  • EASY TO READ MARKINGS: Reference markings on bending plate provide for easy position adjustment.
  • METABO HPT: Same tools. New name. Hitachi power tools has renamed to Metabo HPT.
Check Stock

Mophorn Rebar Tie Wire Coil 10 Rolls, Rebar Tie Tool 0.8mm Diameter, Rebar Tying Wire 110m Length, Rebar Wire for Automatic Rebar Tying Machine Supplies

  • ...Lifecycle: The reusable wire spool is thickened and reinforced, which is not easy to crack the coil, and avoids the problem of getting rebar wire entangled.
  • the high-strength axle is uneasy to be damaged and has a longer service life..
  • Easy to Use: With good toughness and elasticity, it does not crack after repeated bending, which is easy to be shaped.
  • the wire coil is firmly bound, light in weight, convenient for transportation, and does not occupy space.
  • the rebar wire is finely polished with advanced technology, and the burr-free surface does not hurt hands..
  • Wide Application: Whenever you're thinking of tying wire, you will find it set a must-have for your work with various features. It is best for woven wire mesh, handicrafts, gardening, product packaging, and other fields..
Check Stock

FVIEXE 4PCS Rebar Tie Tool, Automatic Rebar Tie Wire Twister with Rubber Handle, Rebar Wire Twister Pull Tie Wire Twister Concrete Metal Wire Twisting Fence Tool (Curved and Straight Hook)

  • High Quality: Premium Steel Material, can withstand large forces.
  • Ergonomic Rubber Handle, ensure a secure comfortable grip.
  • Threaded and Rebounded Structure, automatically bounce back after tension, eliminate the winding process.
  • Semi-Automatic Design: Rebar tie tool can be fastened and automatically returned to the position (automatically recoil and reload), lessens repetitive actions and relieves strain on your hands and wrist. A good tool for saving efforts and improving work efficiency.
  • Easy to Use: Rebar twisters can safely and easily hold the rebars together. Just pull the steel wire through the hook to make the coil rotate to achieve the binding.
  • Wide Application: Rebar tie tools are designed for holding the bars and other wires together, widely used for rebar lashing on construction sites, home garden fence binding, sandbag closing, etc..
  • 2 Different Styles Rebar Tools: You will receive 4PCS wire twister tools including 2PCS curved hook and 2PCS straight hook. Straight hooks are suitable for most functions, and curved hooks are more suitable for grid fence fixing.
Check Stock

BN Products MBC-16B 1 Manual Bender/Cutter Orange

  • Longer handle and cam mechanism provides greater leverage when cutting and bending grade 60 rebar.
  • Adjustable 2-1/2" diameter bending roller.
  • Replaceable cutting jaws have two open slots with innovative shaped blades to prevent chipping of the jaws.
  • Other features include a 12" long no-slip handle grip and a lifting chain to make it easier to carry.
Check Stock

BEAMNOVA Universal Metal Bender Set High Precision Benchtop Manual Rebar Scroll Wire Bending Machine for Copper Tube Iron Aluminum Steel Brass

  • MULTIPLE PURPOSE - BEAMNOVA universal metal bender is a multiple functional metal bending machine, which can be used to produce grids, doors, gates, balcony railing, patio furniture as well as wrought iron lamps..
  • BENDING DIFFERENT KINDS OF MATERIALS. - BEAMNOVA manual scroll bender is designed to cut different kinds of metal material, such as steel, brass, copper, aluminum, etc..
  • IDEAL FOR METALWORKING & REPAIR SHOPS - BEAMNOVA rebar bender is heavy-duty, but at the same time portable and easy to use, which makes it an ideal tool for repairs shop and metalworking shops..
  • GREAT BENDING CAPACITY - In terms of flat steel, BEAMNOVA metal bending machine can perform at 1.18” x 0.394” (30x10 mm).
  • as to round steel and square steel, it can bend 0.394”..
  • DURABLE DESIGN WITH EASY OPERATION - BEAMNOVA universal metal bender is assembled with heavy materials that can last for many year’s use. You can mount it onto a workbench or floor, increasing the flexibility of metal bending process..
Check Stock

Anbull 1500W Electric Rebar Bender,Hydraulic Rebar Bending Machine Bending up to 1 Inch #8 25mm Rebar with an Extra Set of 10-18mm #3 - #6 Rebar Bending Head, Rebar Bending Angle 90 Degrees or Greater

  • Dual use head allows bending for both 3/8 Inch and 1/2 Inch rebar (No3 and No4).
  • Pushbutton extends bender to 35 Inch for maximum leverage.
  • collapses to just 21 Inch for convenient storage and portability.
  • 14 position indexing head adjusts with center pushbutton to allow total access for maximum leverage.
  • Extra sturdy steel handles for the toughest conditions.
  • Super strong indexing head grips rebar securely for accurate bends.
Check Stock

MAHIONG 40 Pack Mushroom Rebar Caps, Fit for 3/8-1 Inch Rebar Stake, Versatile Plastic Rebar Safety Caps Covers, Orange

  • PREMIUM MATERIAL - Made of high-quality thickened pp materials, our rebar caps are sturdy, not easy to crack, come off or deform, wear-resistant and can be used for a long time without fading. The tabs on the inside flexible enough to fit different-sized rebar rods..
  • BRIGHT ORANGE - The rebar safety caps are in orange color that can easy to find and identify rebar sticking up that might not be seen against dark (dirt) background, and probably prevent people from tripping over protruding rebar, with deadly consequences..
  • EASY TO INSTALL - Our mushroom rebar caps are designed to fit atop the rebar, flexible enough a versatile cap for multiple sizes of rebar. Just screw them on the rebar simply by hand, and they will stick fairly well in place..
  • RICH PACK - The package comes with 40 pcs plastic rebar safety caps, fit for 3/8 -1 inch (10 - 25 mm) rebar stake, it is just what you needed to safely cover rebar sticking up out of the concrete. Great for construction sites and marking the end of the stakes in the garden..
  • SATISFACTORY REFUND POLICY - For this order, you can enjoy a worry-free refund within 30 days and 24/7 after-sales service. If you are still dissatisfied with rebar mushroom cap or have other questions, please feel free to contact us..
Check Stock

FAATCOI 60Pcs Rebar Caps, Plastic Mushroom Rebar Safety Cap Fits Rebar Stake Size #3-#7, 3/8 inch to 1inch,10M - 25M Surveying Markers, Concrete Stakes, Grading Marker, Surveyor Pins, and Spikes

  • ♥FITS MULTI REBAR SIZE: Come with 60pcs plastic mushroom rebar caps, and they are made to multi sizes of rebar, such as #3-#7, 10M - 25M steel bars, larger rebar may require hammer fit. It will meet your requirements well.
  • ♥HIGH-QUALITY MATERIAL: These rebar safety caps made of a solid piece of hard plastic, well made and friction, well-constructed and flexible enough underneath to fit different sized rebar rods, which makes them hard to be deformed or broken.
  • ♥ATTRACTIVE AND FUNCTIONAL: These mushroom-style safety caps treated with a brilliant orange finish for higher visibility, and mark the ends of exposed rebar, and blunt the rebar to help prevent injury or a falling worker from being impaled on the exposed rebar.
  • ♥WIDE RANGE OF APPLICATIONS: These plastic caps work great for your project to cover metal stakes and protect from protruding rebar at the construction site, it is also perfect for use as landscape and survey stake markers, concrete stakes, grading marker and more.
  • ♥BUY WITHOUT WORRIES: Every FAATCOI rebar caps offer 30 days money back and 100% satisfaction guaranteed. If you have any question with the products, please feel free to contact us by Amazon message..
Check Stock

Happybuy 900W Electric Rebar Bender 5/8Inch 16mm Hydraulic Electric Hand Held Rebar Bender Machine for Bending Steel Rope

  • Integral Hydraulic Cutter 7/8": It is a manual integral hydraulic rebar cutter, through the pump to generate pressure, to cut rebar, easy to operate. Max. Cutting Diameter: 7/8". This tool is suitable only for Rebar..
  • Durable Construction: The cutting head of this rebar cutting tool is made of high strength forged steel with high hardness. The rebar cutter blades have been through special heat treatment, having a good expansion ability..
  • Thickened Cylinder 13 Ton: It is a manual integral hydraulic cutter tool, through a 13 tons cylinder to generate pressure, with good tightness and no oil leakage, to generate pressure, to produce large force for rebar cutting. The one-person operation, save your time and energy..
  • Convenient Operation:Thickened, anti-slip, and insulated handles give you comfortable and safe using experience, suitable for long-lasting use. Durable design and exquisite workmanship make it fit for your needs. The rebar cutter is easy to store with a toolbox offered..
  • Professional Purpose: Hydraulic rebar cutters are widely used in construction, electricity, transportation, oil, metallurgy, and other areas where it is necessary to cut the rebar..
Check Stock