Top Auto Rebar Tying Tools Reviews

LTM CONCRETE Snap Rebar Chairs 1.5 inch (30 Pack) – Quick, Easy & Durable Support – Bar Sizes 3-5 - Heavy Duty Plastic Spacers - Made in USA

  • HEAVY DUTY: LTM Snap Rebar Chairs are built with a special blend of materials that support heavy loads and strengthen your pour. Our chairs will never rust, corrode or degrade inside the concrete..
  • VERSATILE: Our easy-to-use clips firmly hold bar sizes #3-5.
  • smaller bars and mesh will easily rest inside them too..
  • EASY TO USE: LTM Snap Rebar Chairs are already inexpensive, but you’ll save even more in labor costs. Set an entire rebar grid in minutes and skip wire-tying altogether..
  • MADE IN USA: The entire LTM Concrete product line is made in the USA, including 100% of our raw materials. Buy LTM and keep America working..
  • NOTE: These chairs are built specifically to work in forms and on hard-packed surfaces. Their minimal footprint will sink if used on sand and other soft-earth applications..
Check Stock

Mophorn Rebar Tie Wire Coil 10 Rolls, Rebar Tie Tool 0.8mm Diameter, Rebar Tying Wire 110m Length, Rebar Wire for Automatic Rebar Tying Machine Supplies

  • Dedicated Device: It is suitable for various brands of rebar tiers on the current market, and ensures efficient performance without wire being jammed.
  • Premium Material: This rebar wire is made of high-quality low carbon steel. Through an elaborate process of drawing molding, acid pickling, high-temperature annealing, hot galvanizing, and cooling, the coated zinc layer is thick and corrosion-resistant..
  • Sustainable Lifecycle: The reusable wire spool is thickened and reinforced, which is not easy to crack the coil, and avoids the problem of getting rebar wire entangled.
  • the high-strength axle is uneasy to be damaged and has a longer service life..
  • Easy to Use: With good toughness and elasticity, it does not crack after repeated bending, which is easy to be shaped.
  • the wire coil is firmly bound, light in weight, convenient for transportation, and does not occupy space.
  • the rebar wire is finely polished with advanced technology, and the burr-free surface does not hurt hands..
  • Wide Application: Whenever you're thinking of tying wire, you will find it set a must-have for your work with various features. It is best for woven wire mesh, handicrafts, gardening, product ....
Check Stock

LEATHERMAN, Rebar Multitool with Premium Replaceable Wire Cutters and Saw, Stainless Steel with Leather Sheath

  • AN ICON UPDATeD: Inspired by Tim Leatherman's original PST, the Rebar features all-locking tools, 100% stainless steel construction and removable wire/hard-wire cutters.
  • 17 TOOLS IN 1: The Rebar’s bounty of tools include knives, pliers, screwdrivers, wire cutters, an electrical crimper, a wire stripper, bottle and can openers, a file, a saw, an awl and a ruler.
  • OUR GUARANTEE: We’re proud to stand behind every product that leaves our factory in Portland, Oregon.
  • That’s why we offer our 25-year warranty, so you can be confident your Leatherman lasts a lifetime.
  • STRONGER DESIGN: The Rebar pliers have been optimized for strength and feature replaceable wire/hard-wire cutters—a first for a 4-inch tool from Leatherman.
  • ALWAYS ON HAND: Compact, lightweight and made for just about any job around the house or job site, your Rebar is always within reach and ready to go.
Check Stock

LEATHERMAN, Rebar Multitool with Premium Replaceable Wire Cutters and Saw, Stainless Steel with Nylon Sheath

  • AN ICON UPDATeD: Inspired by Tim Leatherman's original PST, the Rebar features all-locking tools, 100% stainless steel construction and removable wire/hard-wire cutters.
  • 17 TOOLS IN 1: The Rebar’s bounty of tools include knives, pliers, screwdrivers, wire cutters, an electrical crimper, a wire stripper, bottle and can openers, a file, a saw, an awl and a ruler.
  • OUR GUARANTEE: We’re proud to stand behind every product that leaves our factory in Portland, Oregon.
  • That’s why we offer our 25-year warranty, so you can be confident your Leatherman lasts a lifetime.
  • STRONGER DESIGN: The Rebar pliers have been optimized for strength and feature replaceable wire/hard-wire cutters—a first for a 4-inch tool from Leatherman.
  • ALWAYS ON HAND: Compact, lightweight and made for just about any job around the house or job site, your Rebar is always within reach and ready to go.
Check Stock

LEATHERMAN, Rebar Multitool with Premium Replaceable Wire Cutters and Saw, Coyote Tan with Nylon Sheath

  • An icon updated: Inspired by Tim Leatherman's original PST, the Rebar features all-locking tools, 100% stainless steel construction and removable wire/hard-wire cutters.
  • 17 tools in 1: The Rebar’s bounty of tools include knives, pliers, screwdrivers, wire cutters, an electrical crimper, a wire stripper, bottle and can openers, a file, a saw, an awl and a ruler.
  • Our guarantee: We’re proud to stand behind every product that leaves our factory in Portland, Oregon.
  • That’s why we offer our 25-year warranty, so you can be confident your Leatherman lasts a lifetime.
  • Stronger design: The Rebar pliers have been optimized for strength and feature replaceable wire/hard-wire cutters—a first for a 4-inch tool from Leatherman.
  • Always on hand: Compact, lightweight and made for just about any job around the house or job site, your Rebar is always within reach and ready to go.
Check Stock

FVIEXE 4PCS Rebar Tie Tool, Automatic Rebar Tie Wire Twister with Rubber Handle, Rebar Wire Twister Pull Tie Wire Twister Concrete Metal Wire Twisting Fence Tool (Curved and Straight Hook)

  • High Quality: Premium Steel Material, can withstand large forces.
  • Ergonomic Rubber Handle, ensure a secure comfortable grip.
  • Threaded and Rebounded Structure, automatically bounce back after tension, eliminate the winding process.
  • Semi-Automatic Design: Rebar tie tool can be fastened and automatically returned to the position (automatically recoil and reload), lessens repetitive actions and relieves strain on your hands and wrist. A good tool for saving efforts and improving work efficiency.
  • Easy to Use: Rebar twisters can safely and easily hold the rebars together. Just pull the steel wire through the hook to make the coil rotate to achieve the binding.
  • Wide Application: Rebar tie tools are designed for holding the bars and other wires together, widely used for rebar lashing on construction sites, home garden fence binding, sandbag closing, etc..
  • 2 Different Styles Rebar Tools: You will receive 4PCS wire twister tools including 2PCS curved hook and 2PCS straight hook. Straight hooks are suitable for most functions, and curved hooks are more suitable for grid fence fixing.
Check Stock

DNYSYSJ Automatic Rebar Tying Machine, 8-34mm Hand Held Rebar Bender Machine Tool Kit, for Civil Building, Foor Pipe, Heating Floor Mesh, Steel Bar w/Pliers+ Charger (Orange)

  • ★Labor-saving -- Compact size, lightweight, easy to grab. It can save 3-5 times than man power by hand. Reasonable structure, advanced craft, simple and convenient operation, high efficiency and convenient maintenance..
  • ★Performance -- It is a miniature motor tool has the trait of safety and credibility. Rebar Tier is a hand held machine used to pack rebars quickly..
  • ★Specifications -- Material: Plastic + Metal.
  • Battery Charging Time: 1.5 hours full filling.
  • Applicable Scope Of Steel Strapping: 8mm - 34mm.
  • Knot The Required Time: 0.8 seconds at a time.
  • Machine Size: 275 mm * 65 mm * 240 mm / 10.83''x2.56''x9.45''(appr.).
  • ★Operating Skills -- 1. In use, the left tilt 45 degrees after banding, the next time the banding into a right tilt 45 degrees banding, left and right alternately banding. 2. When the machine is about to tighten, the machine will appear slightly shaking, while holding the hand of the machine not too tight, you can relax properly..
Check Stock

CCTI Rebar Tie Wire - 16 Gauge Black Soft Annealed 3.5 lb. Roll (Approx 340 Ft) - 1 Pack

  • Premium Quality - Soft Annealed Rebar Tie Wire.
  • Roll Dimension: OD 4.6" - Width 5.5" - Round Hole 1.9".
Check Stock

Colorado Anglers Fly Tying Kit with 8 Fly Tying Tools - Fly Fishing Combo Set with Bobbin, Threader, Bodkin, Dubbing Twister, Hackle Pliers, Scissors, & Whip Finisher - The Ultimate Fishing Tool Kit

  • 8 QUALITY TOOLS: Featuring eight (8) essential and premium quality tools, our complete fly tying kit includes all of the necessary accessories you will need to create your own unique and attractive flies..
  • WHAT'S INCLUDED: Our fly fishing knot tying tool starter set includes a vise with base, bobbin, threader, bodkin, dubbing twister, hackle pliers, scissors, whip finisher- all inside of a handy and convenient carrying case..
  • STAY ORGANIZED: Our useful, sturdy, and convenient carrying case is compact and lightweight to keep all of your fly tying tools organized and secured on your fishing trips. Its ergonomic, thoughtful, and portable design ensures....
Check Stock

LTM CONCRETE Dually Rebar Chairs (12 Pack) – 7 Heights in 1 Chair - Quick, Easy & Versatile Support – Vertical & Horizontal Applications – Made in USA

  • EXTREME VERSATILITY: The patented Dually is the only rebar spacer of its kind – one chair holding bars at many different heights! Clips will firmly hold #3-6 bars at 1”, 1 ½”, 2”, 2 ¼”, 2 ½”, 3”. Turned on its side, Dually will support any resting mesh or bar at 2 inches (up to #12)..
  • WIDE BASE: Works on grade, Dually features a wide base that prevents sinking and tipping on soft surfaces. It also includes plenty of flow-through spacing for aggregate and concrete..
  • HEAVY DUTY: This chair is made with a special blend of materials that support heavy loads and strengthen your pour. Our chairs will never rust, corrode or degrade inside the concrete..
  • EASY TO USE: Set an entire rebar grid in just minutes and eliminate the need for wire-tying. Dually is already low-priced, but you’ll save even more in labor costs..
  • MADE IN USA: The entire LTM Concrete product line is made in the USA, including 100% of our raw materials. Buy LTM and keep America working..
Check Stock

MAHIONG 40 Pack Mushroom Rebar Caps, Fit for 3/8-1 Inch Rebar Stake, Versatile Plastic Rebar Safety Caps Covers, Orange

  • PREMIUM MATERIAL - Made of high-quality thickened pp materials, our rebar caps are sturdy, not easy to crack, come off or deform, wear-resistant and can be used for a long time without fading. The tabs on the inside flexible enough to fit different-sized rebar rods..
  • BRIGHT ORANGE - The rebar safety caps are in orange color that can easy to find and identify rebar sticking up that might not be seen against dark (dirt) background, and probably prevent people from tripping over protruding rebar, with deadly consequences..
  • EASY TO INSTALL - Our mushroom rebar caps are designed to fit atop the rebar, flexible enough a versatile cap for multiple sizes of rebar. Just screw them on the rebar simply by hand, and they will stick fairly well in place..
  • RICH PACK - The package comes with 40 pcs plastic rebar safety caps, fit for 3/8 -1 inch (10 - 25 mm) rebar stake, it is just what you needed to safely cover rebar sticking up out of the concrete. Great for construction sites and marking the end of the stakes in the garden..
  • SATISFACTORY REFUND POLICY - For this order, you can enjoy a worry-free refund within 30 days and 24/7 after-sales service. If you are still dissatisfied with rebar mushroom cap or have other questions, please feel free to contact us..
Check Stock

VEVOR 1.5KW Electric Rebar Bender, 1''(25mm) Hydraulic Electric Hand Held Rebar Bender & Happybuy Electric Rebar Cutter, 1.7KW 110V Electric Hydraulic Rebar Cutter

  • Product 1: 0 - 90 Degrees Excellent Performance: This electric rebar bender is designed with excellent performance. It helps save valuable person-hours by bending rebar 1/4'' to 1" (6 to 25 mm) within 5 seconds. 1/4'' / 6 mm #2 Rebar(0-55°), 1'' / 25 mm #8 Rebar(0-90°). It is able to satisfy your various bending demands..
  • Product 1: 1500W Pure Copper Coil Motor: This portable rebar bender features a 1500W pure copper coil motor, which can run quietly with low noise and significantly improve your working efficiency, reducing unnecessary wear. Besides, a copper motor can extend this rebar bending machine's operating life to a large extent..
  • Product 1: Sturdy Machine Body & Head: The electric bender machine adopts the sturdy machine body and high-intensity hook, which are stronger and not easy to break. It can stand super-hard rebar with strong clamping force, which can help to reduce steel rebar waste. Multiple screws fixed on the head enforce the stability and sealing..
  • Product 1: Precision Pressure Relief Valve: This hydraulic rebar bender features a precision pressure relief valve and a hydraulic-powered piston for strong thrust and less power consumption. After the steel bar is successfully bent, you can pull the pressure relief valve to move the st....
Check Stock

Happybuy Electric Hydraulic Rebar Cutter, 900W Portable Electric Rebar Cut 5/8' 16mm #5 Rebar within 3 Seconds, 110V

  • 0 - 90 Degrees Excellent Performance: This electric rebar bender is designed with excellent performance. It helps save valuable person-hours by bending rebar 1/4'' to 1" (6 to 25 mm) within 5 seconds. 1/4'' / 6 mm #2 Rebar(0-55°), 1'' / 25 mm #8 Rebar(0-90°). It is able to satisfy your various bending demands..
  • 1500W Pure Copper Coil Motor: This portable rebar bender features a 1500W pure copper coil motor, which can run quietly with low noise and significantly improve your working efficiency, reducing unnecessary wear. Besides, a copper motor can extend this rebar bending machine's operating life to a large extent..
  • Sturdy Machine Body & Head: The electric bender machine adopts the sturdy machine body and high-intensity hook, which are stronger and not easy to break. It can stand super-hard rebar with strong clamping force, which can help to reduce steel rebar waste. Multiple screws fixed on the head enforce the stability and sealing..
  • Precision Pressure Relief Valve: This hydraulic rebar bender features a precision pressure relief valve and a hydraulic-powered piston for strong thrust and less power consumption. After the steel bar is successfully bent, you can pull the pressure relief valve to move the steel, and the piston will return to its origi....
Check Stock