Top Auto Pump Pulley Reviews

Orion Motor Tech Power Steering Pump Pulley Puller/Installer Tool Set, Pump Pulley Remover Installer Tools Compatible with Ford, GM, and Chrysler Vehicles

  • POWER STEERING REPAIR SET: This Orion Motor Tech tool kit for home and professional power steering repair pulls and installs any pump pulley with a 1-1/8, 1-1/4, 1-5/16, or 1-3/8 inch hub diameter.
  • COMPLETE 7-PIECE SET: This pulley pump puller kit includes a pulley remover, a pulley installer, 2 forcing screws, 1 sleeve, 2 puller jaws, and a disconnect tool.
  • the reversible puller jaw design also lets you check and repair pulley flanges with greater ease.
  • DURABLE PERFORMANCE: Each of these power steering tools is constructed from structural-grade AISI 1045 medium carbon steel for the necessary strength to get your work done right.
  • each piece is also heat treated and blackened for even greater dependability and superior corrosion resistance to give you years of use.
  • WIDE COMPATIBILITY: This pulley pump removal kit is compatible with the Saginaw, Thompson, and Ford C111 C2 power steering pumps in most Ford, GM, and Chrysler vehicles and the belt-driven vacuum pumps and press-on water pump pulleys in GM’s V6 engines.
  • the two forcing screws also work with most VW vehicles’ power steering systems.
  • USER FRIENDLY: This power steering pump pulley installer and remover set is intuitive but also comes with clear instructions for easy step by step operation.
Check Stock

Four Seasons 36895 Reversible Fan Kit

  • Mercedes-Benz fan clutch holding wrench holds the water pump pulley to allow release of the fan.
  • Mercedes-Benz fan clutch wrench removes the thermo-viscous radiator fans found on Mercedes-Benz and Ford vehicles.
  • BMW Fan clutch holding wrench holds the water pump pulley in place while loosening the radiator fan.
  • BMW fan clutch wrench is used to remove and install the thermo-viscous fan on BMWs and Fords.
  • Universal fan belt adjustment wrench services Mercedes-Benz Nissan Quest and Mercury Villager radiator fans and pulley belts.
Check Stock

Assault Racing Products 2253KIT-BK Big Block Chevy Black Billet Aluminum Gilmer Belt Drive Pulley Kit BBC 427 454

  • Short / Long Style Mechanical Water Pumps up to 5/8in Shaft.
  • Water Pump Pulley, Crankshaft Pulley, Alternator Pulley, Belt.
  • Water Pump and Crankshaft Pulleys are 1:1 Ratio.
Check Stock

NexADD Fan Clutch Wrench Set 32mm & 36mm Water Pump Holder Tool Fit for BMW Ford GM Chevrolet,Fan Clutch Nut Wrench Set,Fan Clutch Removal Tool,Water Pump Pulley Holder,Clutch Fan Removal Tool Kit

  • REMOVE & REINSTALL AUTOMOTIVE FAN CLUTCHES ★- The NexADD 32mm & 36mm Fan Clutch Wrench Kit with Fan Pulley Holding Tool removes lock nuts on temperature-dependent thermo-viscous fans. The holder bar keeps the water pump pulley in place while loosening the radiator fan. It is a direct replacement and completely fit, wich could help you save much money..
  • FITS YOUR VEHICLE★-The NexADD Fan Clutch Wrench Set is compatible with BMW vehicles, including, but not limited to,the following applications: fan clutch wrench tool is kit compatible with BMW M4 M10 M20 M30 M40 M44 M50 M52 M52TU M54 M56 M60 M70 M73 S14 S38 S54 S50B30 S50B32 and compatible with Ford.Also compatible with some Ford, GM, and Chevy models..
  • BUILT TO LAST★- The 15" fan clutch wrench and holder are specially lengthened to provide extra leverage with sure grip when working on hard-to-get-to fan clutch nuts on metric thermo-viscous fans, letting you service your timing or water pump quickly and easily. The rubber handle covered in the middle helps prevent hand fatigue during prolonged us..
  • EASY TO USE ★- Attach the pulley holder bar with your bolts inserted through the holes, lock into place on water pump face, place wrench on fan clutch nut, and loosen the fan clutch nut by turning clock....
Check Stock

ABN Fan Clutch Removal Tool 36mm and 32mm Fan Clutch Tool Kit with Water Pump Pulley Holder 3-Piece Fan Clutch Set

  • REMOVE & REINSTALL AUTOMOTIVE FAN CLUTCHES: The ABN 32mm & 36mm Fan Clutch Wrench Kit with Fan Pulley Holding Tool removes lock nuts on temperature-dependent thermo-viscous fans.
  • The holder bar keeps the water pump pulley in place while loosening the radiator fan.
  • FITS YOUR VEHICLE: Made to be compatible with BMW engine models M10, M20, M30, M40, M44, M50, M52, M52TU, M54, M56, M60, M70, M73, S14, S38, S50B30, S50B32, S54.
  • Also compatible with some Ford, GM, and Chevy models.
  • Bar has (3) 13 mm diameter holes and (1) 24x12 mm hole plus (1) 33x11 mm and (1) 38x25 mm half-circle grooves.
  • BUILT TO LAST: Constructed from 0.2-inch (5 mm) thick vanadium steel for maximum strength and longevity.
  • 12.5-inch (31.8 cm) long clutch fan removal tool handles for less user fatigue.
  • EASY TO USE: Attach the pulley holder bar with your bolts inserted through the holes, lock into place on water pump face, place wrench on fan clutch nut, and loosen the fan clutch nut by turning clockwise using 32 mm or 36 mm (both included) spanner to undo nut.
  • If the hole sizes on the tool are smaller than the bolts holding the pulley wheel to the wate....
Check Stock

Power Steering Pump W/Bracket & Chrome Pulley, Chrome Saginaw Style, Compatible with Chevy SBC

  • Kit includes: (1) New Chrome Saginaw "Key-Way" Power Steering Pump, (1) Chrome Steel Pump Bracket Kit, (1) Chrome Groove Pump Pulley(5-3/4" diameter), (1) Chrome Power Steering Pump Cap.
  • 1975 and later vehicles will require a new hose to go from a metric o-ring style to the 5/8" Inverted flare.
  • A different bracket must be used if your alternator is mounted over the exhaust manifold towards the outside of the head..
  • A 3 groove crank pulley may be required for use with short water pumps.
  • Female 5/8"-18 inverted flare fitting for the high pressure outlet.
Check Stock

APDTY 134887 Power Steering Pump Pulley

  • Allows Replacement of the Original Power Steering Pump Pulley.
  • Fits Select 2002-2012 Acura Models, Select 2002-2011 Honda Models.
  • Match Vehicle to Compatibility Chart to Ensure Exact Fitment on Your Specific Model.
Check Stock

SOUTHWEST SPEED POWER STEERING CONVERSION KIT,COMPATIBLE WITH 76-86 JEEP CJ5 CJ7,20:1 GEAR BOX,1400 SERIES POWER STEERING PUMP,V-BELT PULLEY,PITMAN ARM,TELESCOPING STEERING SHAFT,LINES,HOSES,FITTINGS

  • ...iter, with the OE Can > Re-manufactured > Perfect pump for rock crawlers > 1400 Series Pumps are Identical to the 1300 Series Pumps but are manufactured with much stronger components > Larger Ring and rotor which displaces more fluid per revolution.
  • Southwest Speed 1976-1986 Jeep CJ 5 3/4" Power Steering Pump V-Belt Pulley (# 149-1594) > Pulley comes Pre-Pressed Power Steering Pump > 5 3/4" Steel Pulley > V-Belt Style Pulley | Southwest Speed 1976-1986 Jeep CJ High Strength Speed Pitman Arm (# 107-1827) > Restores proper steering performance to help ensure vehicle control > OE Type Replacement part > Crafted from the strongest materials available | Southwest Speed 1976-1986 Jeep CJ Telescoping Steel Power Steering Shaft (# 150-2861).
  • Southwest Speed 16MM O-Ring Low Pressure Return Hose and 18MM High Pressure Line Adapter Kit (# 150-2178Kit) | 1 High Pressure Line from Pump to Reservoir (# 150-2178) | 3 Feet of Low Pressure Hose Black -6AN (# 927-9586) | 1 Hose clamp (# 940-2059) | 1 90 Degree Return Line Adapter -6an Fitting with hose clamp (# 150-0098).
Check Stock

3HP 250L/min 115PSI V Type Twin Cylinder Air Compressor Pump Head Single Stage 2200W 1050rpm Universal Air Compressor Head Motor Faster Inflation&Low Noise for Factory Auto Repair Painting

  • ...pport and correction to ensure the smooth operation of the main engine.Special valve steel is used for hair piece, which has good strength and toughness at high temperature.Faster inflation and low noise.Strong cooling blade, good cooling performance..
  • 【Installation notes】1. When placing the pump head, the motor pulley and the belt pulley must be in the same straight line. The more aligned, the less vibration.2.Tighten the screws (including the base and pulley screws).3.After the screws are installed, the belt shall be tightened. If the belt is loose, please move the motor. After the screws are tightened, reinstall the belt..
  • 4.The new machine must be filled with engine oil before starting, and the engine oil shall be added to the center of the red point of the oil mirror.5.The rotation direction of the pump head is clockwise. If it reverses, please adjust it in time.6.Change the oil for the first half month, the second one and a half months, and the next two to three months..
  • 7.Replace the air filter regularly. Under normal conditions, it must be replaced in two to three months, and in case of poor environment, it must be replaced in one month.8.The operation of the machine will produce high temperature, be careful not to burn!【Shipment】We....
Check Stock

Big Block Chevy Pulley Kit 396 427 454 V-Belt - Long Water Pump

  • Chevy Big Block Pulley Kit, LWP, V-belt (396-427-454).
  • Made in the USA from 6061-T6 Billet Aluminum.
  • Designed for engines with Long Water Pump.
  • Give Your Engine the Strong American Made Pulleys that It Deserves!.
  • Includes single groove water pump, two groove crank, and single groove alternator pulley and cap.
Check Stock

Assault Racing Products A9724 Big Block Chevy Chrome Triple Groove Long Crankshaft Pulley BBC 396 427 454

  • The pulley have deep grooves to prevent belt slippage and are good for replacing your old pulley..
  • They are made of metal materials to provide good performance and reliability. The Crankshaft Pulley is durable and have high wear resistance..
  • Groove Quantity: 2, Center Hole Diameter: 28mm / 1.1'', Size: 7.1x16.7cm / 2.8"x6.57"(H*D).
  • This crankshaft pulley fits for Chevy SBC Engines when using a long water pump. Please confirm your car model of the part before purchasing to avoid buying the wrong..
Check Stock

Power Steering Pump Assembly Compatible with Ford Edge 2007-2010 Fusion 2010-2012 Lincoln MKZ 2007-2012

  • YHTAUTO Affordable and Prime Power Steering Pump, Directly Fit.
  • Fits Ford Fusion 2010-2012 Sedan, Edge 2007-2010 Sport Utility.
  • Power Steering Pump Outlet Attachment Type: Threaded.
  • Reference Number: 7H6Z3A696A, 7T4Z3A696A, 8T433A696AA, 9T433A696AA, 9T4Z3A696A, 20-1401.
Check Stock

A-Team Performance - Saginaw Power Steering Pump Double-Groove Steel Pulley - Compatible with GM (Black)

  • Saginaw Power Steering Pump Double-Groove Steel Pulley.
  • V-Belt Pulleys — compatible with small and big block Chevy and small block Ford.
  • Specifications — Saginaw pump style, double-groove quantity, keyway pulley attachment, 5/8 keyway bore, steel material, and outside diameter of 5.750 inches.
  • Feature — provides affordable style and reliability.
Check Stock