Top Auto Pipe Laying Reviews

9-12MM Cable Pulling Socks Grips Wire Mesh Puller Socks Grip Mesh Puller Cable Puller Socks

9-12MM: In color Red, force 700lbs(317kgs), weight 20g, length 310mm..
MATERIAL: Steel galvanized single strand preparation, anti rust, long used and durable..
DESIGN: Eye mesh design, single wave galvanized mesh cable socks, keep your cable from scratching, anti slip, easily grip the cable through the pipe line, the wall or the telecom..
CABLE SOCKS: Great tools for electrician, it is soft, and you can bend it. (But be careful, please do not bent it right angle.).
APPLICATION: Different size suits for cable with different diameter, by using in pipe cable laying and cable pulling..

Check Stock

9-12MM Mesh Cable Puller Socks Galvanizing Eye Mesh Cable Wire Grip Metal Cable Socks Wire Grip Cable Puller Sock

SIZE CHARACTERISTICS: 9-12MM cable pulling sock, with Force 450N, equals 45kgs..
MATERIAL: Steel galvanized single strand preparation, anti rust, long used and durable..
DESIGN: Eye mesh design, single wave galvanized mesh cable socks, keep your cable from scratching, anti slip, easily grip the cable through the pipe line, the wall or the telecom..
FEATURES: With easy operate snap design, easily connect the cable grip sock with your pulling tools, saving time, improving work efficiency..
APPLICATION: Different size suits for cable with different diameter, by using in pipe cable laying and cable pulling. Great tools for electrician, it is soft, and you can bend it. (But be careful, please do not bent it right angle.).

Check Stock

Jackson Safety Pipe Marker Centering Head Tool, Curv-O-Mark Jumbo 7, To measure Pipes 1" and Up, Standard 8" Y-Type Head, Adjustable Dial Set Level, 14776

PIPE MEASURER – Designed for pipe fitters and welders as an measurer for setting center lines, establishing angles and marks for butt-ins, locating points inside pipes and tanks, laying out keyways, and measuring declivity.
JUMBO SIZE – Curv-O-Mark Jumbo #7 model digital angle finder tool used on pipes and tanks that measure 1" in diameter and larger.
Y HEAD – The center finder has a 8" Y type head fitted with adjustable dial bubble protractor (DSL).
BEST OPERATION – Use this Jackson Safety hardened centering pin angle finder with a small hammer or mallet to tap the pin in for the most effective pipe marking.
SAFETY STANDARDS – When it comes to providing innovative safety solutions, unparalleled features, long-lasting value, and comfort on the job, Jackson Safety has set the standard for the best protective gear and tools in the industry.

Check Stock

Jackson Safety Pipe Marker Centering Tool, Curv-O-Mark Standard 6, 14775 - Use to measure Pipes 0.5\ and Up, Standard 4\ Y-Type Head, Adjustable Dial Set Level

PIPE MEASURER – This easy-to-use marking tool is designed for pipe fitters and welders as an economical measuring tool for setting center lines, establishing angles and marks for butt-ins, locating points inside pipes and tanks, laying out keyways, and measuring declivity.
STANDARD SIZE – This Curv-O Standard #6 model level tool may be used on pipes and tanks that measure one-half of inch in diameter or larger.
Y-HEAD – The center finder has a 4 inch Y-type head fitted with an adjustable dial bubble protractor (DSL).
BEST OPERATION – Use this manual Jackson Safety hardened centering pin angle finder with a small hammer or mallet to tap the pin in for the most effective pipe marking.
SAFETY STANDARDS – When it comes to providing innovative safety solutions, welding tools with unparalleled features, long-lasting value, and comfort on the job, Jackson Safety has set the standard for the best protective gear and tools in the industry.

Check Stock

Senyar Exhaust Pipe Expander Tool Set, Tail Expander Kit 1‑1/18in to 3‑1/2in Steel Muffler Spreader with Storage Case

【Quality Steel Material】The exhaust muffler adopts a forged and heat-treated steel structure to improve strength and durability. This product includes three different expander sizes. It is used to extend the length of the pipe proportionally so that the pipe has the same diameter instead of a cone. Install the auto parts on the standard exhaust system..
【Easy to Use】The pipe can be expanded with a simple wrench turning to repair and install the exhaust system. Simply choose the correct size expander for your pipe, insert it into the damaged pipe end, and turn the rotating rod of the expander until the dent is removed..
【Prevent Loss】We provide a sturdy storage box, the terminal can be placed in any shelf or storage area after use, it can effectively prevent the loss of tools..
【Suitable For】This tail pipe expander is suitable for all LCD monitors from 1-1/8 inches to 3-1/2 inches. Thin-walled tube, versatile. It is used to extend the length of the pipe proportionally so that the pipe has the same diameter instead of a cone. Please double check the part number of your item before you buy, matching information is for reference only..
【Suitable For】This tail pipe expander is suitable for all LCD monitors from 1-1/8 inches to 3-1/2 inche....

Check Stock

MaxxHaul 80748 Rolling Knee Creeper/Pads ABS High-Impact Frame 5 Swivel Castors Tool Tray Holder

Rolling knee pads allow you to be mobile and easily move from side to side while protecting your knees..
Frame is made from rugged ABS high impact plastic with pads to cushion your knees while performing your project..
Features five 2" Diameter non-marring swivel castors for maximum maneuverability..
Built-in tray and holder to keep your small tools and parts handy.
Perfect when doing painting, laying tile or vinyl, Auto detailing, Auto repair & Maintenance, landscaping and more.

Check Stock

BOSCH BH2760VC 120-Volt 1-1/8 Brute Breaker Hammer

POWER: outstanding power, providing 35 ft.-lbs. of impact energy for a tool weighing just 63 pounds, perfect for the toughest applications including foundation work and pipe laying.
CONTROL: features Bosch’s Active Vibration Control, providing a longer air cushion in the hammer mechanism with an ergonomic shock-absorbing handle that allows for more control throughout the hammering job.
CONVENIENCE: includes Bosch’s Service Minder Brush System, shutting the hammer off for brush replacement or preventative maintenance so you can focus on the task at hand.
DURABILITY: grease packed gear box and hammer mechanism eliminates uncertainty of job site lubrication for long-term tool durability.

Check Stock

FZONE Aquatic Glass Lily Pipe Set with Lily Skimmer Inflow and Lily Outflow for Aquarium Filter 5/8 16/22mm Tubing

Set Includes skimmer lily Inflow pipe, outflow pipe and spring brush..
Made of the highest quality laboratory-grade borosilicate glass. (The floating part and the unit for adjusting the ratio between surface extraction....
Skimmer lily Inflow pipe will auto adjust with the water level. Surface skimmer effectively remove the dirty film on top of the water. Water surface....
Lily outflow pipe delivers clean water from the filter to the aquarium (outflow)..
Attention! Ø17mm outer diameter suitable for tubing of 5/8''ID(16mm internal / 22mm external). Package included: 1x lily pipe outflow, 1x lily....

Check Stock

V-Twin 30-0576 - Six Gun Exhaust Pipe End Set

Installation method: remove the old one and install the new one..
Note: We are a professional manufacturer of auto parts, if you have any questions, you can contact us at any time, we will answer you within 24 hours..
Bright decoration:The surface is polished, and the decorates your exhaust pipe, used to reduce the damage of automobile exhaust pipe due to long-term sewage and exhaust gas, and extend the life of exhaust pipe..
Durable:protect your original pipe from the sun and rain,avoid and deformation.Increase exhaust pressure and reduce exhaust noise effectively..
Replacement: Easy to use, no damage to the car, not easy to fall off, firmly installed on the car..

Check Stock

Hamiledyi Aquarium Glass Lily Pipe Set Lily Surface Skimmer Inflow and Lily Outflow for Aquarium Filter Tubing Freshwater Fish Planted Aquarium Tank Aquatic Plants

Set Includes skimmer lily Inflow pipe and outflow pipe..
Made of the highest quality laboratory-grade borosilicate glass. (The floating part and the unit for adjusting the ratio between surface extraction....
Skimmer lily Inflow pipe will auto adjust with the water level. Surface skimmer effectively remove the dirty film on top of the water. Water surface....
Lily outflow pipe delivers clean water from the filter to the aquarium (outflow)..
ATTENTION! Ø17mm outer diameter suitable for tubing of 5/8''ID(16mm internal / 22mm external). Package included: 1x lily pipe outflow, 1x lily....

Check Stock

30PCS Automatic Chicken Water Nipple Poultry Waterer Feeders Hen Duck Screw Style Water Drink Feeder

...ples have a simple design that eliminates the need for a drip cup, and chickens can easily get clean, fresh water from these 360-degree nipples..
【STURDY AND DURABLE】: Made of durable plastic and stainless steel. Wear and corrosion resistant, well-sealed, strong and sturdy, durable. Ideal for broilers, breeders, laying hens, small hens, ducks, and hunting birds..
【EASY TO USE AND CLEAN】: Screw directly into PVC pipe or use reducer tee with Teflon tape for round PVC pipe. The nipples are removable, so you can easily clean them when needed..
【AUTOMATIC WATER SUPPLY WITHOUT LEAKAGE】: Water is sensitive, no drinking and self-stopping, no leakage, so that your chickens can drink clean water, have healthy breeding, and keep the environment dry and hygienic. You can apply them to pipes, buckets, etc to make convenient water feeders for chickens, geese, broilers, feeders, small hens, ducks, hunting birds, etc..
【WHAT YOU GET】: You can get 30pcs chicken water nipples. The screw size is 11/ 32 inches, and the pilot hole of the drill bit is 5/ 16 inches. It is recommended that 3 chickens/birds share 1 nipple. Suitable for automatic watering of most poultry such as chickens and ducks. If you have any questions, please feel free to contact us..

Check Stock

Beduan Stainless Steel Pipe Fittings, 1/2" NPT x 1/2" NPT Male Threaded, 2" Length Nipple Cast Pipe

Made of 304 stainless steel, corrosion resistant ductility at high temperatures, and low magnetic permeability..
Type: 1/2" NPT x 1/2" NPT Male thread, 2" style is about 50 mm length..
Operating temperature: range from -65 to 250 degrees F..
Widely use: Pipe threads connect to common pipes and easy to replace and install..
Durable: It is a good choice for laying pipes in home buildings, and it is not easy to damage after long-term use..

Check Stock

OMT Hex 28mm (3/4″-10 Thread) Exhaust Pipe Expander Stretcher Tool Set 1-5/8 to 4-1/4 Inches, Muffler Pipe Spreader Automotive Car Tool Kit for Tail Pipe Tube

AUTO PIPE EXPANSION KIT: This mechanic’s tool kit provides the handy collets and expander required to stretch tailpipes before making tight seals to pipes with smaller diameters. Perfect for home DIY or professional auto shops..
WIDE EXPANDING RANGE: The exhaust pipe stretcher offers various collets for a broad expansion range from 1-5/8" to 4-1/4". Includes: Steel expander 1 5/8" - 2" Collet, Steel expander 2" - 2 1/2" Collet, 2 3/8"- 2 3/4" Collet, 2 3/4" - 3 1/8" Collet, 3 1/8" - 3 1/2" Collet, 3 1/2" - 3 7/8" Collet, 3 7/8" - 4 1/4" Collet..
EASY OPERATION: Choose the proper collet, clamp the pipe, and then expand the pipe—operation of our stretcher kit is really that simple! Use a 1/2" or 3/4" impact wrench to save even more effort. Our helpful user manual is included to guide you through the process..
HEAVY-DUTY CONSTRUCTION: All collets are made of aerospace-grade 6061 Aluminum while the expander utilizes Tempered 40CR Alloy Structural Steel, ensuring rugged rigidity over an extended service life. GB standard compliant..

Check Stock