Top Audio Isolators Reviews

ButtKicker BK-CMAK Couch/Chair Mounting Accessory Kit

  • Easy-to-use kit simplifies installation of your ButtKicker LFE.
  • Allows ButtKicker LFE to be placed simply and securely on whatever furniture you are going to be using.
  • Attaches directly to the leg of your couch or chair, while sitting on rubber isolators.
  • Includes five additional rubber isolators, drastically improving the performance of your ButtKicker LFE.
  • Kit comes with all the necessary mounting hardware, and a handy wrench.
Check Stock

Isolate IT Lavalier Microphone Isolation Shield System for Sanken COS-11 (Black)

  • FOR LAVALIER MICROPHONES: This lightweight mic isolator is designed to fit Sanken COS-11 lavalier microphones. To install, insert the lavalier wire while flexing the isolator open and then slide the microphone down into the cavity..
  • COMPACT ISOLATION: This isolation device is made with a Sorbothane lining that can absorb up to 94.7% of vibration noise and energy while in use. This mic isolator can also reduce noise from mic hits, rustling clothes, and other unwanted sounds..
  • SAFE TO USE: These heavy-duty isolators are safe to use on all materials and can be attached directly to the skin. To fix onto fabric, skin, or other materials, attach the isolator to an adhesive, like a sticky piece of tape, to ensure a sturdy hold..
  • OPTIMAL SOUND QUALITY: Thanks to its slim, contoured design, this miniature mic isolation adapter can provide crisp, quality audio when attached to all types of garments and between layers of clothing..
  • PROFESSIONAL AUDIO RECORDING: This portable lav filter can be used to provide high-quality sound for an interviewer, reporter, broadcaster, presenter, podcaster, and anyone else in a field that requires up-close, quality sound..
Check Stock

MAOPINER 4Pack Ceiling Vibration Damping Mounts, Spring Vibration Isolator for Soundproof and Shockproof for A/C Air Handler Bedroom Theater Studio, 110 Lb Capacity, 1.20\ Deflection

  • Premium Material: The red part of the ceiling vibration damping mounts is made of silicon instead of rubber, better functioning in absorbing vibration. And also the silicon applied is qualified, safe and environmentally friendly material..
  • Specification: 100mm*45mm*50mm or 4''*1.8''*2''.
  • Weight: 0.4kg. Material: steel & rubber. Max load: 50kg (110lbs).
  • The recommended distance of each two isolators is 24 inch, e.g. 63~99 isolators are needed for a room aera of 215~322 sq ft.
  • Easy To Install: The base of the mechanical vibration damping pads has 1 bolt hole on base for rigid mounting when used for supporting machinery, easy installation on ceilings, floors, walls, ducts, etc..
  • Wide Application: : The shock absorber can be used in bedroom, studios, home theaters, houses, hotels, bars, karaoke room etc. Can be mounted to ceilings, walls, pumps..
  • Package Included: 4 x 110 Lb capacity spring vibration isolators.
Check Stock

MuHize Black D-Ring Shackle Cover 2 Pcs Shackle Isolator and 4 Pcs Washer, Isolators Washers Kit Fits 3/4 inch Shackle Gear Design Rattling Protection (Pack of 2)

  • PACKAGE INCLUDED - MuHize 2Pcs black D-ring shackle isolators + 4 Pcs black washers kit. Perfect fit for standard 0.75" or 3/4" D-Rings or Shackles with 7/8" screw pin..
  • EASIEST DIY FOR BUMPER - The shackle isolators and washers are one of the DIY necessities of the off-road trail or everyday driving. The quality shackle isolators can both protect Wrangler or pickup bumper finishes from damage and make it look cool after DIY modification..
  • EASY TO INSTALL - No Screws or drilling are required. And the washers can reduce rattling noise when the vehicle is in motion..
  • DURABLE MATERIAL - MuHize isolator & washers are specific for durable rubber material, which can prevent shackles from crack, warp or corrode effectively..
  • HIGH QUALITY - Perfect bending can be matched with 3/4 inch D-ring shackle. Accurate design. It can be used as a buffer to effectively protect the bumper..
Check Stock

2x PLX-500 Bundle with DJM-250MKII and HDJ-1500S

  • EXCELLENT SOUND DESIGN - Just like the PLX-1000, the PLX-500 is built to produce a high-quality vinyl sound. The shortest possible audio routing from the stylus to the outputs reduces distortion, while the phone/line output switch lets you connect directly to your sound system or to powered speakers with no need for an external amplifier.
  • EASY DIGITAL RECORDING - Record your vinyl collection to high-quality digital files by simply connecting the turntable to your PC or Mac via the USB out.
  • SMOOTH DJ PLAY - Use the PLX-500 to mix and scratch your vinyl records or combine the turntable with rekordbox dvs, a compatible DJ mixer and the RB-VS1-K Control Vinyl to play and perform with your digital files.
  • Precise, fluid mixes are a breeze using the mixer's channel faders, and the 3-band isolators give precision across the highs, mids, and lows.
Check Stock

Topping HS01 USB 2.0 High Speed Audio Isolator Compatible with PCM32bit 768kHz DSD512 withstands up to 1kVRMS

  • Leading innovation - Previous isolators were limited to Full Speed (12 MBit/s) and Low Speed (1.5 MBit/s) transmission. This product is capable of....
  • USB2.0 High Speed - HS01 supports USB2.0 High Speed transmission, which is compatible with high-resolution audio transmission such as PCM32bit/768kHz....
  • Low latency - The latency is only 0.29us, which fully meets hifi and professional applications' needs. Note: Generally, the latency of USB device is....
  • Galvanic Isolation - This product is an ideal solution to break ground loops, avoid noise coupling and protect ports from power surges and voltage....
  • Precautions - When the device connected to HS01 exceeds the current output capability, an external auxiliary power supply can be used. Please note....
Check Stock

FiiO X7II 64GB with Balacned Module AM3A Android-Based WiFi Bluetooth 4.1 APTX Lossless DSD Portable Music Player

  • The X7 Mark II ushers in a new era for lossless music players with its completely redesigned internals and updated exterior..
  • Shipping with the X7 Mark II is our new AM3A amplifier module, an all new design with both single-ended and balanced headphone output..
  • Forming the foundation of the X7 Mark II's audio prowess is the 8-channel ESS ES9028PRO DAC.
  • Three separate crystal isolators: one each for multiples of 44.1kHz and 48kHz sampling rates, as well as a dedicated oscillator for 384kHz.
  • 64GB built-in flash storage and two micro SD card slots each capable of supporting 256GB cards.
Check Stock

4 Pack Rubber Isolation Feet Pads Thick Rubber Washers 1.5 Inch Od 0.5 Inch Id 0.4 Inch Thick Mechanical Vibration Damping Pads Anti Vibration

  • The damping washer is made of high-quality rubber material and has good water, oil, acid, alkali and high temperature resistance.
  • Excellent Texture: made of rubber material, these isolation pads are wear resistant and tough, not easy to damage, suitable for long term use.
  • More importantly, it can absorb most of the vibration.
  • Each washer has an outer diameter of 3.81 cm/ 1.5 inch, an inner diameter of 1.27 cm/ 0.5 inch and a thickness of 1 cm/ 0.4 inch.
  • Rubber isolators help absorb impact and noise and have excellent resistance to aging,they will not harden or crack over time. Use them on audio subwoofer and electronic equipment to prevent skipping and interference.
Check Stock

GearAmerica UBER Shackle Isolators – Only for GA UBER Shackles Will Not Fit a 3/4 D Ring – Helps Prevent Corrosion and Protect Finish – Reduces Noise and Rattling – 2 Pack

  • Keep Your Equipment Safe: Protects your vehicle and your Mega Shackles from scrapes, dings and scuffs and prevents corrosion.
  • Silence Rattle Noise: Our isolators work wonders to eliminate rattle noise while keeping your bumper safe.
  • Exclusively Fits GearAmerica Mega Shackles : These isolators are the perfect functional complement to our bold, virtually unbreakable GearAmerica Mega....
  • Purchase with Confidence: All GearAmerica products include our industry-leading Hassle-Free Lifetime Replacement Warranty.
  • If You Love the Open Road, Join Us: Our mission is to advocate and live a lifestyle of freedom, with respect for nature & machinery, that’s why....
Check Stock

Studio Monitor Isolation Pads - Suitable for 6.5'- 8' inch Speakers - Large Speaker Isolation Pads Fit Most Desktops - High-Density Acoustic isolation Foam - Angled Speaker Foam Stand - 2 Speaker Pads

  • Speaker isolation pads size 10.4 x 13 x 1.6 Inches (W x D x H). Speaker foam is designed to fit with the most popular 6.5″ – 8″ Large monitors.
  • Speaker platform high-density acoustic isolation foam for professional use (50kg/m^3 density)..
  • Angled speaker stand two-component design, monitor isolators allow 5 different angle configurations..
  • Speaker stand desk generates cleaner, more precise sound by reducing vibrations and low-end distortion..
  • Subwoofer sound isolation pads keep your studio’s desktop clean look with no logo on the front of the monitor isolators.
Check Stock

Mono-gatari 4Pcs Spring Vibration Isolator Ceiling Vibration Damping Mounts Anti Vibration Ceiling Suspended Mounted with Removable Frame for A/C Air Handler Bedroom Theater Studio 110 Lb Capacity

  • 【Damping Structure】The red part is made of unique damping silica, better functioning in absorbing vibration, especially for places with subwoofers in entertainment venues..
  • 【High Quality】Vibration damping mounts is composed of 3mm thick steel spring, damping silicone layer, outer frame. Silicon applied is environmentally friendly material..
  • 【Specification】Max load: 50kg (110lbs).
  • The recommended distance of each two isolators is 23.6 inch. E.g. 63~99 isolators are needed for a room aera of 215~322 sq ft..
  • 【Easy Installation】Anti vibration isolator spring is designed with a 5/16 inch (M8) pre-drilled bolt hole, easy installation on ceilings, floors, walls, ducts, HAVC, etc..
  • 【Wide Application】Anti vibration ceiling suspended mounted is widely used in bedroom, studios, home theaters, houses, hotels, bars, karaoke room, TV stations, concert halls, etc..
Check Stock

Oster A6 Cool Comfort Heavy Duty Pet Grooming Clippers with Detachable CryogenX #10 Blade, 3 Speed, Aqua Sky (078006-000-000),Black,1.75 x 1.88 x 6.90 inches

  • Versatile pet hair clippers offer one-touch controls and 3 speeds: high (up to 4,400 SPM), medium (3,600 SPM), and low (3,100 SPM).
  • Heavy-duty precision-calibrated motor provides an ultra-smooth, efficient cutting experience.
  • Vibration isolators help absorb excess vibration and noise for all-day grooming comfort.
  • Soft-grip material helps reduce hand fatigue and heat during prolonged use.
  • compatible with all Oster A5 detachable blades and guide combs.
  • Vibration Isolators centered around the motor help absorb excess vibration and noise, for all-day grooming comfort.
  • 3 speed settings: Hi - 4,400+ SPM, Medium - 3,600 SPM, Low - 3,100 SPM.
  • Compatible with all Oster A5 detachable blades and guide combs.
  • Pig-tail extension cable takes only one outlet spot, removing the frustration of oversized electric plugs.
  • Precision calibrated motor designed for ultra smooth, efficient cutting experience.
  • This model fits standard US 120V outlets.
Check Stock

EPLZON 150A Circuit Breaker Resettable Circuit Breaker 150 amp Self Recovery Circuit Breaker Manual Reset Button for Car Audio and Amps Protection

  • ...h adapters for direct connection with all 12, 24 volt systems.
  • Application: Provide protection for overload or short-circuit current when using high current electricity such as automobiles, ships, ships, RVs, caravans, tractors, loudspeakers, horns, automobile dual-battery isolators, and winches. Audio circuit breakers, Large current thermal trip circuit breaker with manual reset switch, suitable for auxiliary DC electrical system..
Check Stock