Top Audio Capacitor Reviews

Bullz Audio 3300W 20VDC BCAP3.3 Car Digital Power 3.3 Farad Capacitor Cap

  • POWER CAPACITOR: 2 Farad 20-Volt LED Digital Voltage Car Audio Power Capacitor.
  • Capacitance: 2 farad, 2 million microfarad.
  • AUDIBLE WARNING TONE: Audible warning tones for reverse polarity, low battery voltage and voltage overload.
  • CAPACITOR SPECIFICATIONS: Percent capacitance tolerance: 10.
  • Equivalent Series Resistance (ESR): 0.00195 ohms @ 120 Hz @ 25 degrees C.
  • 8-GAUGE INSTALLATION WIRING KIT: Includes 17 foot 8 gauge red power cable, 3 foot 8 gauge black ground cable, and 20 foot speaker wire.
Check Stock

Fielect 80Pcs Aluminum Radial Electrolytic Capacitor 10uF 63V Low ESR Green 5x11mm High Ripple Current,Low Impedance for TV, LCD Monitor, Radio, Stereo, Game

  • 【Dimension】 -Capacitor capacity:10uF.
  • 【Material】 -Electrolytic capacitors are made of high-quality standard materials, with high insulation strength, fast switching speed, high power consumption and good current performance.
  • 【Features】- The capacitor has excellent moisture resistance, small size, wide capacitance and reliable performance.
  • 【Advantage】-Each electrolytic capacitor has an identification code and a marked capacitance value, which is easy to distinguish and use.
  • 【Application】 -This series is suitable for power supply, communication equipment, switching power supply, audio amplifier interconnection level, industrial measurement.
Check Stock

Pyle 5.0 Farad Digital Power Capacitor - High-Performance Car Audio Accessory with Blue Digital Display Voltage Readout Over Voltage Protection Mounting Hardware DC 12-24V - Pyle PLCAPE50

  • SUPPORTS CAR AUDIO SYSTEM: A high-demand audio setup can often place extra demand on your car's electrical system. When you need power, especially for booming bass and soaring highs, this 5.0 farad Pyle capacitor will have it at the ready.
  • BLUE DIGITAL DISPLAY: It's got all you need to make sure your system sounds awesome and stays safe - a blue digital voltage readout to show you how much power is available. Looks great too, thanks to the blue LED lighting & the brushed aluminum case.
  • SAFETY FEATURES: Equipped w/ electronic polarity protection circuit and an over-voltage protection circuit ensure maximum performance and reliability. Features capacitance ± 5%, 20-24 volt surge, 105oC w/ DC 12 to 24 volt.
  • MOUNTING HARDWARE: The digital power capacitor includes mounting charging hardware, chrome-plated post kits, and 1 pair clear brackets for a better installation. Total size measures 8.86” H x 3.5” W.
  • 5.0 Farad Digital Display Power Capacitor - Chrome Plated Post Kits - Aluminum Brushed Case.
Check Stock

Fielect Axial Lead Type Polypropylene Film Capacitor Cylindrical 250V DC 2.7uF 15.5 * 31mm Yellow for Audio Divider 1pcs

  • 【Parameters】- Material: Polypropylene Film.
  • 【Feature】- The specifications of the capacitors is marked on its surface. High temperature resistance of polyester material is 185 Fahrenheit degrees..
  • 【Easy to Use】- Polypropylene capacitor is lightweight with simple structure, easy to use..
  • 【Application】- The film capacitor is suitable for audio amplifiers, dividers, fan lights, household appliances, car speakers, power supplies, beauty equipment, industrial equipment and more..
  • 【Package Contents】- 1 Pcs x Film Capacitor..
Check Stock

Electronic Amplifier, 6J1 Tube Valve Amplifier Tube Amplifier 6J1 Vacuum Electron Tube Valve Preamp Amplifier Board Amplifier Electronic Diy Kit 6J1 Tube Preamp

  • 【Definition】 A valve amplifier or tube amplifier is a type of electronic amplifier that uses vacuum tubes to increase the amplitude or power of a signal..
  • 【Function】 Connect this preamplifier to the audio source with 6J1 tubes and effectively filter the digital flavor. Tube amplifiers produce a warmer or more natural valve sound, make music and the human voice is relatively good..
  • 【Capacitor Filter / Coupling Capacitor】 Eight 470UF capacitor filters are very clean, excellent power supply does not cause humming, filaments are supplied with 12 V DC and must be connected in series to reduce noise. The coupling capacitor is a high frequency electrodeless electrolytic capacitor and low resistance..
  • 【Features】 With the DC 5.5 * 2.1 socket and 12V AC transformer, you can also use a 12V AC transformer without a plug. All you have to do is weld the power cord to the circuit board.This kit is available in parts so you can assemble it yourself and build your own tube amp..
  • 【Customer Service】 Thincol has always strived to provide customers with high quality products and outstanding customer service. If you encounter problems during the purchase or during use, would you contact us? then we will do our best to serve you and protect your interests..
Check Stock

ADUCI BBYPP 1Pairs 200W Two Bass Crossover Treble + Midrange + Dual Woofer Speaker Crossover Audio 3 Way Crossover Frequency Divider 4-8OHM

  • The frequency divider for a treble, a midrange, two bass, the speaker can also use a single bass for high,Mid and low speakers, speakers for 4-8 ohm impedance, the design is to take 4-8 OHM public value design Of the market products are mostly the same, in order to better improve the sound quality,.
  • Material: Inductor with oxygen-free copper around the system, pure copper wire diameter thick, has been verified, 100% pure copper wire, never with enameled aluminum production.
  • capacitor with audio-specific non-polar capacitor, Need more, design reasonable, beautiful appearance,.
  • Size: 11 cm length, 7 cm wide, 2.5 cm thick..
Check Stock

MTX TNE212D 12 1200 Watt 4 Ohm Dual Loaded Car Audio Subwoofer Package with Sub Enclosure Boss 1100W Mono A/B Amplifier Wiring Kit and Capacitor

  • COMPLETE SOUND PACKAGE: Upgrade your cars sound system with this complete package that includes MTX 12 inch dual loaded car subwoofer, a sub....
  • CAR SUBWOOFER: The MTX Terminator series subwoofer system includes 2 subs, sub enclosure and a car amp.
  • CAR AMPLIFIER: Boss Audio Riot Monoblock A/B MOSFET power Amplifier delivers peak power of 1100 watts, RMS power of 825 watts.
  • INSTALLATION WIRING KIT: 20-foot 8 gauge red power cable.
  • POWER CAPACITOR: 2 Farad 20V LED Digital Voltage Car Audio Power Capacitor.
  • Capacitance: 2 farad, 2 million microfarad.
Check Stock

New SKAR Audio VX35-ST 3.5-INCH 500 WATT Titanium Bullet Super TWEETERS - Pair

  • ...werful ferrite magnets allow them to deliver unparalleled loudness and sound clarity..
  • Sold as a set of 2, these bullet style super tweeters are so powerful you might think you're in a concert hall when hearing them for the first time. In addition, each tweeter's positive connection terminal features an inline noise capacitor that eliminates out all low end frequencies that might otherwise harm the tweeters. Frequency Response: 2.2 kHz - 20 kHz, sensitivity: 101 dB, Impedance: 4 ohms. Sold as a set of 2 tweeters.
  • Product Specifications Skar Audio VX35-ST 3.5-inch High Compression Titanium Bullet Super Tweeters Max Power Rating: 500 Watts (Pair) | 250 Watts (Each) RMS Power Rating: 300 Watts (Pair) | 150 Watts (Each) Die-Cast Aluminum Basket High Flux Ferrite Magnet.
  • 1" High Temperature Kapton Voice Coil Impedance: 4 Ohms In-line Capacitor Crossover (Attached to the positive terminal of each tweeter) Frequency Response: 2.2 kHz - 20 kHz Sensitivity: 101 dB Sold as a Set of 2 Bullet Tweeters Warning: Extremely Loud.
Check Stock

12V Amplifier Board, DROK 15W+15W 2.0 Dual Channel Audio Amplifier Board PAM8620 DC 8-26V 24V Digital Stereo Amp Module Class D Mini Power Amplify Circuit for Sound System Speaker DIY

  • 【Parameters】- Material: Polypropylene Film.
  • 【Feature】- The specifications of the capacitors is marked on its surface. High temperature resistance of polyester material is 185 Fahrenheit degrees..
  • 【Easy to Use】- Polypropylene capacitor is lightweight with simple structure, easy to use..
  • 【Application】- The film capacitor is suitable for audio amplifiers, dividers, fan lights, household appliances, car speakers, power supplies, beauty equipment, industrial equipment and more..
  • 【Package Contents】- 1 Pcs x Film Capacitor..
Check Stock

ALMOCN Ceramic Capacitor Assortment Kit,24Value 960PCS 2pF-100nF DIP Monolithic Multilayer Ceramic Chip Capacitor for Hobby Electronics, Audio-Video,Electronic Project

  • 24Value 960pcs High quality Aluminum ceramic capacitor kit, Capacitance Tolerance: ±5%..
  • Capacitance Model: 2pF~100nF (2pF, 5pF, 10pF, 22pF, 30pF, 33pF, 47pF, 68pF, 100pF, 220pF, 330pF, 470pF,680pF,1nF,1.5nF,2.2nF,3.3nF,4.7nF,6.8nF,10nF,22nF,47nF,68nF,100nF), Total 24 Different Values,Each model 40pcs..
  • Clearly mark:Marker code on every electrolytic capacitor, and with a label mark capacitor value, easy to distinguish.
  • all capacitors are packed in re-use box, easy to manage..
  • High quality:Long service life,excellent humidity resistance, miniature size, wide capaciHigh quality:Long service life,excellent humidity resistance, miniature size, wide capacitance, reliable performance. tance, reliable performance..
  • Wide Application:Wide Applications in Computers, Data Processing, Telecommunication, Industrial Control, etc.This Ceramic capacitors assortment used for Audio-Video, DIY Electronics projects,guitar parts and Vehicle Repair Projects,etc..
Check Stock

DC Audio LVL3-M2 12' Level 3 900W/1800W Dual-2-Ohm Car Audio Subwoofer/Sub

  • output power is 15W stereo (24V 8ohm)/ 10W stereo (12V 8 ohm), if connect 4 ohm or 2 ohm speaker, the power will be automatically limited to 15W..
  • Artificial Material: this New-designed stereo amplifier module is made of noble black immersion gold circuit board, PAM8620 chip, imported KEMET speaker capacitor, large-capacity filter capacitor for channels. Besides, we customized black copper terminal blocks and gold-plated audio input terminal blocks for this new amplifier module..
  • High Performance: the class D power amp module is with high efficiency of over 90%, general harmonic distortion noise is less than 0.2%, low quiescent current and noise suppression..
  • Safe Protection: the 2 channel amp board is designed with input reverse connection protection, short circuit protection, over heat protection, overcurrent protection, overvoltage protection, undervoltage protection.
  • Additional Function: it is available to connect external mute function (MUTE: High level mute, factory default low level).
  • available to add an external Shutdown (SD: the chip will be Shutdown at low electricity level, factory defaults high electricity level..
Check Stock

BOSS Audio CAP8 8 FARAD LED Digital Voltage Display Car Audio Power Capacitor and QPower 0 Gauge 3000 Watt Car Amplifier Wiring Installation Kit

  • POWER CAPACITOR: 8 FARAD LED Digital Voltage Display Car Audio Power Capacitor.
  • High-Level Input Surge Voltage: 20 Volts.
  • AUDIBLE WARNING TONE: Audible warning tones for reverse polarity, low battery voltage and voltage overload.
  • DIGITAL DISPLAY: Blue LED digital illuminated display window.
  • SPECIFICATIONS: Equivalent Series Resistance (ESR): 0.0015 Ohms @ 120 Hz @ 25 Degrees C.
  • Capacitance: 8 Farad, 8000000 Microfarad.
  • WIRING KIT: Deluxe High Quality Fuse Holder.
Check Stock

Audio Amplifier Board, DROK 5W+5W Mini Amplifier Board PAM8406 DC 5V Digital Stereo Power Amp 2.0 Dual Channel Class D Amplify Module for Speaker Sound System DIY

  • ...audio amplifier board working voltage is DC 5V, output power is 5W (2Ω 5V)/3W (4Ω 5V) / 1.8W (8Ω 5V). Input method is monaural input..
  • Artificial Material: this New-designed mini power amplifier is made of noble black immersion gold circuit board, imported KEMET speaker capacitor, large-capacity filter capacitor for channels. Besides, we customized black copper terminal blocks and gold-plated audio input terminal blocks for this new amplifier module..
  • High Performance: the digital amplifier module is with high efficiency of over 90%, general harmonic distortion noise is less than 10%, low quiescent current and noise suppression..
  • Safe Protection: the class D dual-channel amp board is designed with input reverse connection protection, short circuit protection, over heat protection.
  • Additional Function: it is available to connect amplifier type to choose different function (MODE: high electricity level is Type D, low electricity level is Type AB. Factory defaults high electricity level).
  • available to add an external Shutdown (SD: the chip....
Check Stock