Top Atx Motherboard Reviews

Traovien SATA Cables, Dual PSU Power Supply 24-Pin Adapter Cable for ATX Motherboard 18AWG - 1FT

  • Allowing you to connect an additional PSU to your ATX motherboard.
  • Both PSU will be powered up by one single motherboard.Use a second PSU to power multiple graphics cards.
  • Compatible with 24 pin and 20+4 pin ATX motherboards (1x 24 pin(20+4) male port and 2x 24 pin female ports).
  • Designed for intense Gamining and BitCoin Mining.
  • Material: 18AWG . Length: main cable 12inches + secondary cable 12inches (30cm+30cm).
  • Dual PSU Power Supply 24-Pin Adapter Cable for ATX Motherboard sata cable 24 pin to 2420+4) pin sata cable JBingGG Dual PSU Power Supply 24 Pin (20+4) Adapter Cable for ATX Motherboard 12-inch ( 30cm ) (24 pin to 24(20+4) pin).
  • Note: Be sure to recognize the direction when inserting the cable!!! Dont insert the cable backwards or insert the wrong position to prevent the device from being burned!! When inserting the cable, hold the socket of the device before inserting the cable to avoid excessive force to insert the socket pin..
  • How to use: Plug the 24PIN of the main power supply into the female plug and plug the other end to the motherboard, and plug the secondary power supply into another 24PIN female plug to switch the power at the same time..
Check Stock

XPG Prime ARGB 24 PIN PSU Extension Cable ARGBEXCABLE-MB-BKCWW

  • 【24 Pin ATX RGB Cable Extension Kit 】Adding the RGB effect on the 24pin ATX PSU extension cable. Making your case looks more stunning and....
  • 【Update Version】Increased the lamp beads to 12 pieces, thus makes the RGB brighter, even under the day or the bright light environment, the....
  • 【Softer Cable Material】Wrapped on silicone material, With a double layer structure of 1.5cm/0.59 inch thickness, more suitable for bending and....
  • 【Easy Install & Good Management】 PSU extension cables offers a better solution to modding enthusiasts for the motherboard. These pc cable....
  • 【Widely Compatiblity】Packaging including 1x 24Pin RGB ATX cable which support installed in 5V 3PIN. And it is suitable for E-ATX Motherboard, ATX....
Check Stock

Lian Li STRIMER+ TRIPLE 8-PIN GPU RTX 30 Series Extension Cable Only Compatible with GPU RTX 30 Series

  • Dual PSU Power Supply 24 Pin (20+4) ATX Motherboard Extension Cable, 12 inch/ 30cm..
  • Allowing you to connect an additional PSU to your ATX motherboard.
  • Compatible with 24 pin and 20 pin ATX motherboards (1x 24 pin(20+4) male port and....
  • Both PSU will be powered up by one single motherboard. Use a second PSU to power multiple graphics cards.
  • Length: main cable 12inches + secondary cable 12inches (30cm+30cm).
  • Reminder: If there are pins off, you can plug back in the direction of the slot, does not affect the use!.
Check Stock

TAYCCEU CPU 8 Pin Female to CPU 8 Pin and ATX 4 Pin Male Power Supply Extension Cable EPS 12V for Motherboard, 9.5 inch/24cm

  • 【CPU Power Cable】EPS 12V CPU 8 Pin Female to CPU 8 Pin and ATX 4 Pin Male Power Supply Extension Cable for Motherboard..
  • 【Easy to Install】EPS 12V CPU 8 Pin Female end to plug into 8 pin male to 8 pin male cable of power supply, CPU 8 pin and ATX 4 pin male ends to plug into the motherboard..
  • 【Compatibility】Compatible with all PSUs - ATX, SFX, Fanless PSU. Compatible with motherboard that has 8-pin +12V socket, 4-pin +12V socket or 8-pin +12V socket and 4-pin +12V socket. It is availble to use the single CPU 8pin, single ATX 4 pin or both of CPU 8 pin + ATX 4 pin..
  • 【Specification】Length: 9.5 inch/24cm, Gauge: 1007-18AWG(standard tin-coating copper wire), Quantity: 1pcs..
  • 【Note】This cable is a common power supply Y-splitter extension cable, not converted cable. It supports all of power supplies with CPU 8 pin male port output. It needs to be connected to CPU 8 pin Male to Male Power Cable of PSU. Please use it correctly..
Check Stock

DIY ITX MATX ATX Computer Open Air Case, Aluminum Open Frame Computer Case, PC Test Bench Vertical Motherboard Chassis DIY Kit(Blue Black)

  • Excellent Heat Dissipation: The open chassis design is completely exposed for heat dissipation, freeing up the internal space of the chassis..
  • Open Frame Computer Case: The split hardware structure is adopted, and the open structure provides you with a large internal installation space..
  • DIY ITX MATX ATX Computer Case: Bare block frame, easy to disassemble, easy to assemble, stackable, fully experience the fun of DIY..
  • ATX/M-ATX/ITX Motherboard Case: Support ATX, M ATX, ITX motherboard, power supply supports ATX ordinary large power supply, support expansion of 1 x 3.5, 1 x 2.5 inch hard disk storage, support 7 PCI expansion slots..
  • Aluminum PC Open Air Case: Made of aluminum, it is strong, durable, stable in use and has a long service life..
Check Stock

PCCOOLER Power Supply Sleeved Cable, Customization 24 Pin ATX RGB Cable Extension Kit 16AWG, 5V 3Pin Synchronized PSU Cable for RGB Software from All Major Motherboard Cable Management

  • the solder joints are added, so the wiring is not easy to fall off. When bent, the RGB PSU cable can still maintain a neat line effect. Your PC case is in a clean and tidy environment..
  • 【Easy installation and good management】 RGB cable extension provides a better solution for motherboard modification enthusiasts. These RGB sleeved cables can manage your case well. Moreover, the hard silica gel outside the wiring is upgraded to soft silica gel, the bent cable extension cord is easy to install, saving installation time..
  • 【Wide compatibility】16AWG. High power,compatible with all power supplies below 1300w, rgb cables pc kit making your installation and use more convenient. The package includes 1x 24Pin RGB ATX cable, which supports installation in 5V 3PIN. Suitable for E-ATX motherboard, ATX motherboard, Micro-ATX motherboard, etc..
Check Stock

EZDIY-FAB ATX 24-pin 90 Degree Power Connector 5V 3 Pin ARGB Rainbow Female to Male Power Adapter for Computer Motherboard ATX Power Supply-1 Pack

  • The ATX 24 Pin 90° Adapter is compatible with all ATX motherboards and power supply units that support a standard 24 pin main power connection..
  • Built with the advanced ARGB lighting system , it features ARGB Rainbow color that glows attractively without straining your eyes ..
  • 90 Degrees right angle design, connecting between PSU 24 Pin Cable and motherboard connector, does not cause pressure on the motherboard connector for long-term stable use..
  • ATX 24-pin female to male connector 90 degrees suitable for motherboard .Plug and play installation..
  • This design will solve the PSU installation for the limited height chassis You can install the 24PIN power cable from vertical to horizontal direction with this adapter..
Check Stock

Sanpyl ATX Motherboard Test Bench Best for Overclocking Test, ATX Computer Open Air Frame,Mini Aluminum DIY Computer Case for ATX

  • ATX MOTHERBOARD TEST BENCH: It is a Nude building blocks frame, lightweight and convenient disassembly, which can be stacked..
  • DIY ASSEMBL: ATX computer open air frame easily assembling with the simple structure, you can fully experience the fun of DIY..
  • GREAT HEAT-DISSIPATION: Open frame design has good heat dissipation performance. Support ATX ordinary large power supply..
  • PREMIUM AND DURABLE: ATX motherboard test bench made of high-quality 20* 20 aluminum alloy, steady for use..
  • AFTER SALES SERVICE: If there are any using problems or unsatisfactory with our products, please feel free to contact us, our professional customer service team will reply you within 24 hours, and we will consult the issues with sincerity. Thanks for purchasing from us..
Check Stock

MUSETEX MATX (Micro-ATX) PC Case with 2pcs ARGB Fans Type-C Port USB 3.0 Airflow Mid Tower Mesh Front Panel Tempered Glass Side Door Mini ITX Computer Gaming Cases (Y3-N2-BW)

  • ...agement strips with dedicated routing allow you to build a durable and beautiful computer host..
  • [Addressable ARGB FANS] 2pcs 120mm ARGB fans are pre-installed to provide beautiful lighting and excellent airflow. The color of the fans can be controlled by the LED buttons on the I/O panel as well as by connecting the motherboard for software control..
  • [ Perfect Capacity ] Mesh PC case is effortless to install 3 x 2.5" SSD.
  • Motherboard Compatibility: Micro-ATX/ Mini-ITX.
  • [MUSETEX Y3 Series] Motherboard Compatibility: Micro-ATX and Mini-ITX. Not for ATX motherboard..
Check Stock

ZRM&E 24 Pin Multiple Power Supply Splitter 20+4 Pin Dual PSU Cable Mining Adapter ATX Motherboard Adapter Extension Cable 30cm

  • Type: 30cm 18AWG 24 Pin Multiple Dual PSU Power Supply Splitter.
  • Connectors: One end is 24-Pin (20+4)pin male connector, plugs into the ATX power port on the motherboard. The other two ends are 24-Pin female connectors, connect to two PSU..
  • Low Cost: Allows you to connect two PSU to your ATX motherboard (both 24 pin and 20 pin), and save overall hardware costs of big and expensive power supply..
  • More Efficient: Use the power on/off switch on your motherboard to power both power supply units simultaneously to run on a single motherboard..
  • Applications: Great for 6+ GPU mining rigs that need extra power, applied to intense Gaming, BitCoin, Ethereum, Zcash, Litecoin..
Check Stock

Lian Li O11 AIR Mini White ATX Case - O11AMW

  • Motherboard: E-ATX (Max 280 mm wide)/ ATX/ Micro-ATX/ Mini-ITX.
  • Material: Aluminum Panel, Mesh Panel & Tempered Glass.
  • Drive: 6 X 2.5 SSD or 2 X 2.5 SSD + 4 X 3.5 HDD.
Check Stock

Mini-Box picoPSU-160-XT High Power 24 Pin Mini-ITX Power Supply

  • Clips directly into motherboard ATX socket to save space.
  • Fits any motherboard equipped with a 24pin ATX connector.
  • Over 96% efficiency and 100% fanless + Long Life, Solid Polymer Caps, Japan.
  • PLEASE NOTE-This PSU Requires a 12vDC Input. NO AC to DC Power Brick is Included with the PSU..
Check Stock

Cylon White RGB Mid Tower Computer Case

  • Combining innovative cable management, concentrated airflow, and proven CORSAIR build quality, the 4000D is a fitting choice for an immaculate high-performance PC..
  • The CORSAIR RapidRoute cable management system makes it simple and fast to route your major cables through a single channel, with a roomy 25mm of space behind the motherboard for all of your cables..
  • Includes two CORSAIR 120mm AirGuide fans, utilizing anti-vortex vanes to concentrate airflow and enhance cooling. Motherboard will fit in our 4000 Series cases without any issue. Mini-ITX, micro-ATX, ATX, and E-ATX form factor motherboards are all supported..
  • A spacious interior fits up to 6x 120mm or 4x 140mm cooling fans, along with multiple radiators including 360mm in front and 280mm in the roof (dependent on RAM height)..
  • Put modern connections within easy reach with a front I/O panel including a USB 3.1 Type-C Port, USB 3.0 port, and a combination audio/microphone jack..
Check Stock