Top Atx Mother Board Reviews

Rosewill ATX Slim Full Tower Gaming Computer Case with Blue LED Front Fans Case Rise Glow Black

• NOTICE: Please make sure your motherboard equipped with on-board USB 3.0 socket before purchasing.

ATX Power Supply Breakout Board and Acrylic Case Kit with ADJ Adjustable Voltage Knob, Supports 3.3V, 5V, 12V and 1.8V-10.8V (ADJ) Output Voltage, 3A Maximum Output, Reset Protection. New Version

• ATX power supply breakout board, with ADJ adjustable voltage knob, supports 3.3V, 5V, 12V and 1.8V-10.8V (ADJ) output voltage.
• The voltage output terminals of the ATX power expansion board correspond to each screw terminal..
• Compatible with 3.3V: STM32 MCU, network communication equipment, such as Wi-Fi Bluetooth and other devices, generally for microcontrollers, and some low-power modules, etc. 5V: Raspberry Pi, Banana Pi, Tinker Board, Nano Pi, USB interface, etc.
• Compatible with 9V: Arduino, motor drive, display driver module, etc. 12V: motor drive, LED light, vehicle equipment with power requirements less than 24w, etc..

anidees AI Crystal M Middle Tower Tempered Glass CEB-ATX/ATX PC Gaming Case Support 360/240 Radiator - Black AI-CL-M-LITE PC Case ONLY

• Motherboard & Radiator Support: Compatible with 12 "x 10.5" CEB, ATX Mother Board and 360/280/240 Radiator.
• Extremely spacious interior: GPU support max: 370 mm, height of the CPU cooler max: 175 mm, PSU support up to 300 mm.
• Tempered glass: 5 mm thick tempered glass on the side wall and on the front.
• Removable dust filter front, top and bottom, Front I / O: USB 2.0 x 2, USB 3.0 x 2, Audio, Mic.
• More possibility: Support 8 slots in the rear and Vertical Graphic card (up to 40mm thickness).

New Version ATX Power Supply Breakout Board and Acrylic Case Kit with ADJ Adjustable Voltage Knob, Supports 3.3V, 5V, 12V and 1.8V-10.8V (ADJ) Output Voltage, 3A Maximum Output, Reset Protection.

• 1.ATX power supply breakout board, with ADJ adjustable voltage knob, supports 3.3V, 5V, 12V and 1.8V-10.8V (ADJ) output voltage..
• 2.The voltage output terminals of the ATX power expansion board correspond to each screw terminal..
• 3. At the same time, the panel is also equipped with an acrylic case kit for easy to use..
• 4.Compatible with 3.3V: STM32 MCU, network communication equipment, such as Wi-Fi Bluetooth and other devices, generally for microcontrollers, and some low-power modules, etc. 5V: Raspberry Pi, Banana Pi, Tinker Board, Nano Pi, USB interface, etc..
• 5.Compatible with 9V: Arduino, motor drive, display driver module, etc. 12V: motor drive, LED light, vehicle equipment with power requirements less than 24w, etc..

KDMPOWER MIPC-M7350C Micro ATX 350W Power Supply

• KDMPOWER 350W MIPC-M7350C MICRO ATX Power Supply.
• Micro SFX power supplies are known mostly as a replacement power supply and can also be used for mini-ATX cases.
• 115V/230V switchable power supply (International compatible) Compatible with ATX 12V.
• 100% compatible with the following models: In-Win IP-P300BN1-0 Power Man Sparkle FSP FSP300-60GHS FSP270-50SNV FSP270-50SNVS FSP300-60GLS-MJR FSP300-60GHS-R FSP200-50SNV FSP300-60GNV FSP300-60GLS FSP300-62GL.
• Astec ATX202-3515 Bestec ATX-1523F ATX-1523D ATX-100-5 ATX-151 5184-2191 TTGI FP-250U Apex ALLIED AL-8250SFX AL-B200SFX Logisys PS350MA ISP 120SI AP-MP4ATX30.

Biostar TB360-BTC D+ (Intel 8th and 9th Gen) LGA1151 SODIMM DDR4 8 GPU Support GPU Mining Motherboard

• LGA 1151 Supports 8th and 9th Generation Intel Core Processor.
• Supports SO-DIMM DDR4-2133/2400/2666 up to 16GB Memory.
• Supports 8 x PCIe x16 slots (50mm between X16 slots).
• Motherboard Dimensions 19.1 Inch x 9.25 Inch ( W x L ).
• This motherboard has NO 24 pin ATX power supply connector it uses eight 6 pin PCIe connectors for power and has 8 PCIe connectors as outputs to power GPU's. If using a ATX power supply you will need a 24 pin jumper to start the power supply..
• Your CPU MUST have intergrated graphics. HDMI cable must be plugged into on board HDMI. This can be changed later in the BIOS if desired..

KEDIERS PC Case - ATX Tower Tempered Glass Gaming Computer Case with 9 ARGB Fans,C590

• [9 Pre-Installed 120mm ARGB Fans]-- Suitable for enhanced cooling. With the pre-installed ARGB controller you can sync it with the motherboard, each addressable ARGB fan offers 16.8 million colors for exceptional customizable lighting. You don't need to pay extra for fans. Only when the 5V-3PIN cable on the control board is connected to the motherboard can the ARGB light synchronization be realized..
• [2 Tempered glass]-- C590 gaming case is equipped 2 * 4mm thick tempered glass, which can clearly see the RGB lighting and the components in the building, Creating a good gaming atmosphere..
• [I/O Panel]-- 2 x USB3.0 Port, 1 x Type C, 1 x HD Audio, Reset Button, Power Button..
• [Cable Management]-- Back Bays: 3x 3.5'' HDD's and 3 x 2.5'' SSD's. Removable storage cable box.
• [Remarkable Expansion]-- C590 Mid Tower Gaming Computer Case supports ATX/Micro-ATX/Mini-ITX motherboards..

Thermaltake Level 20 GT Motherboard Sync ARGB E-ATX Full Tower Gaming Computer Case with 2 200mm ARGB 5V Motherboard Sync RGB Fans + 140mm Black Rear Fan Pre-Installed CA-1K9-00F1WN-02

• Light up the system - 2 Pre-installed 200mm 5V MB Sync a RGB fans (Sync with as US, Gigabyte, MSI, as rock) +1 rear black fan.
• Built-in dual-mode 5V ARGB switch board - Control light via I/O port button (27 LED modes/7 Colors) or via 5V ARGB Sync motherboard.
• 27 LED modes through I/O port button - Wave mode/ flow mode/ RGB lighting (single color)/ Radar mode (Red, yellow, green, Cyan, blue, White, Purple)/ breath mode (8 Colors)/ full lighted mode/ single color mode (7 Colors)/ light off.
• Clear view of PC gaming - four 5mm tempered glass (left & right & Front & top) with standard mounting.
• Built-in PSU cover - Removable PSU cover provides a better cable management and a tidy-looking system.
• Drive Bays - 2. 5'' Ssd x 10 or 3. 5'' X 7.
• Supports Mini ITX, Micro ATX, ATX, and E-ATX motherboard.
• I/O port - USB 3. 0 x 2, USB 2. 0 x 2, HD Audio x 1, Type-C x 1.
• Outstanding expandability - max CPU cooler height: 200mm.
• Dimension - 22. 9'' X 11. 6'' X 23. 3''. 44. 31lbs. 3 Year.

Dell Vostro 260 Inspiron 620 GDG8Y Board

Dell WDRTF XPS 8300 Inspiron 620 CPU Heatsink & Fan 4-Pin

PNY NVidia Quadro K1200 (Low Profile) PCIE 2.0 x 16 DP Graphics Cards VCQK1200DP-PB

• Compatibility with system enclosures ranging from compact SFF desktops to traditional desk side ATX towers.
• Up to 2x the graphics performance of competing products.
• Large 4GB GDDR5 GPU memory capacity and memory interface is 128 bit.
• Supports AutoCAD and SOLIDWORKS advanced photorealistic rendering.
• Superior CAD graphics performance for value line business PCs.
• Support for four monitors including 4K displays for signage applications.
• Highest Highest performance low-profile professional graphics board currently available low-profile professional graphics board currently available.

ATX PC Open Frame Test Bench Motherboard Overclock Computer Case DIY Mod Base Chassis

• package include:1*acrylic board,7*PCI Column,4*bottom pads,1*some screws..

FEBRYTOLD 2 Pcs Remote Key Shell for Kia, 3 Buttons Flip Key Fob Remote Shell with Blade for 2012-2014 Kia Rio 2010-2013 Kia Soul and 1 Pcs Screwdriver (Only Key Shell)

• 【Material】The shells are made of high-quality plastic. Durable long lasting material..
• 【Function】Just the key shell and uncut blank blade, no electronics or circuit board are included. This is a replacement part to match the original in form and function..
• 【Installation】 Just remove the original electronics and key blade inside the original key shell and install them to the new key shell with the screwdriver, not need reprogramming. If you use the uncut blank blade, you must cut it..
• 【Compatible】Compatible with 2010-2013 Kia Soul, 2012-2014 Kia Rio. OEM Part Number: NYOSEKSAM11ATX, 315-NAS-SL, SEKS-AM11ATX..
• 【Package】2 Pcs key shells with blade Blade(No Chip, No Buttons), 1 Pcs Screwdriver..