Top Astm Machined Components Reviews

Avet HXW4/2RH-SI Lever Drag Conv Reel

  • Precision machined 6061 T-6 marine grade aluminum and stainless steel components.
  • Anodized for superior corrosion resistance and beautiful finish.
  • True (1) piece frame for the ultimate in strength vs. weight.
  • Powerful lever drag system with adjustable strike pre-set.
  • Precision machined stainless steel gears.
Check Stock

Alumina Ceramic Rod .125\ Diameter x 12\ Long

  • Common application are: kiln/furnace components, spacers, bushings, insulators, nozzles, sleeves, seal rings, support pins & wear resistant components..
  • Readily available material with reasonable cost possessing excellent properties handling thermal and mechanical shock..
  • Can be fabricated and used in a wide range of applications from stock to tight tolerance machined parts..
  • Safe operating temperature up to 2500ºF.
Check Stock

Audio-Technica AT-PEQ30 Phono Equalizer

  • mm/mc input can be switched with the front switch.
  • full-scale nf type phono equalizer circuit that realized low noise by high sound quality fet input.
  • superior riaa characteristics and high performance created by precision components.
  • achieves excellent noise resistance by adopting a metal enclosure.
  • aluminum machined front panel and gold-plated contacts.
  • Included components: Phono Equalizer, AC Adapter.
Check Stock

Avet Reels MXL 5.8 Star RH-BL G2 Series MXJ 5.8 Star RH (Blue), One Size

  • Precision machined 6061 T-6 marine grade aluminum and stainless steel components.
  • Anodized for superior corrosion resistance and beautiful finish.
  • Re-designed, True one piece frame for the ultimate in strength vs. weight.
  • Offset machined handle arm to reduce centerline profile and cranking wobble.
  • Powerful lever drag system with adjustable strike pre-set ratcheting glide plate, and strike stop button.
  • Precision machined stainless steel gears.
  • Our patented, indestructible, SILENT dog and gear anti-reverse system, the most reliable in the industry, re-designed with more engagement teeth to reduce handle back-play.
  • 40% more drag output than our Classic Series, Up to 12 lbs. of drag at strike, 20 lbs. full.
Check Stock

Avet Reels MXL 5.8 G2NGP RH-SI G2 Series MXL 5.8 RH (Silver), One Size

  • Precision machined 6061 T-6 marine grade aluminum and stainless steel components.
  • Anodized for superior corrosion resistance and beautiful finish.
  • Re-designed, True one piece frame for the ultimate in strength vs. weight.
  • Offset machined handle arm to reduce centerline profile and cranking wobble.
  • Powerful lever drag system with adjustable strike pre-set ratcheting glide plate, and strike stop button.
  • Precision machined stainless steel gears.
  • Our patented, indestructible, SILENT dog and gear anti-reverse system, the most reliable in the industry, re-designed with more engagement teeth to reduce handle back-play.
  • 40% more drag output than our Classic Series, Up to 12 lbs. of drag at strike, 20 lbs. full.
Check Stock

Avet Reels SXJ 5.3 G2NGP RH-SI G2 Series SXJ 5.3 RH (Silver), One Size

  • Precision machined 6061 T-6 marine grade aluminum and stainless steel components.
  • Anodized for superior corrosion resistance and beautiful finish.
  • Re-designed, True one piece frame for the ultimate in strength vs. weight.
  • Offset machined handle arm to reduce centerline profile and cranking wobble.
  • Powerful lever drag system with adjustable strike pre-set ratcheting glide plate, and strike stop button.
  • Precision machined stainless steel gears.
  • Our patented, indestructible, SILENT dog and gear anti-reverse system, the most reliable in the industry, re-designed with more engagement teeth to reduce handle back-play.
  • 40% more drag output than our Classic Series, Up to 12 lbs. of drag at strike, 20 lbs. full.
Check Stock

6AN Rollover Valve Aluminum Fuel Cell Tank Mounted Hose Line Fitting AN6 Tip Roll Over Valves

  • Manufactured from lightweight 6061-T6 cnc machined billet aluminum alloy.
  • Tight, leak-free connections and then black anodized for durability.
  • Precision machined to exacting tolerances for trouble-free, ensure accurate thread engagement.
  • Allow for the connection of hose ends to other components like oil pumps, fuel pumps and fuel filter.
Check Stock

Greenlee 0153-22-INS 3/16-Inch by 6-Inch Insulated Cabinet Tip Screwdriver

  • Rated to 1000 vac and exceed both ASTM F1505 and IEC 60900 standards.
  • Dual layer insulation provides added safety and protection against electric shock against electric shock.
  • Ergonomically designed for more comfort and torque.
  • Built with precision machined, black phosphate plated tips for accurate fastener contact.
Check Stock

JET PUMP 1HP VERT MULTI

  • Motor windings – superior insulation materials protect against excessive moisture and contaminants to ensure prolonged motor life.
  • Automatic pressure regulator – faster-acting and quieter, design eliminates “hunting” for correct drive pressure. New improved stem and guide are precisely molded to assure efficient, trouble-free performance on all deep wells.
  • Dustproof cover – all electrical components are protected from dirt, dust and insects by a dustproof canopy.
  • Ventilating air cannot contaminate vital switching components, this eliminates the most common cause of motor failure.
  • Quality construction – precision-machined, close-grained cast iron pump body and base are specially treated to resist corrosion.
Check Stock

CRKT Provoke Compact: Kinematic EDC Folding Pocket Knife, Morphing Karambit, D2 Plain Edge Blade, Aluminum, Pocket Clip, 4045

  • EDC Grail: The road to EDC perfection ends at the LionSTEEL SR22 with Aluminum handles. A lightweight masterpiece fit equally for everyday use or collector’s shelves, Sleipner Steel blade, machined Aluminum handles, quality Italian craftsmanship.
  • 4D Machined Handles: Manufactured using LionSTEEL’s exclusive SOLID knife technology, the SR22 features handles machined from a single piece of Airspace Grade Aluminum, maximizing strength while minimizing weight..
  • Sleipner Steel Satin Blade: Sleipner steel blade boasts high hardness and excellent resistance to wear and chipping, with an integrated flipper tab for easy and safe opening deployment..
  • Refined Finish: Exclusive IKBS ball bearing system to facilitate easy opening and closing, Rotoblock safety system integrated frame lock, dual carry clip with integrated carbide tungsten glassbreaker for emergencies..
  • Italian Craftsmanship: Made in Italy by world class knife makers, LoinSTEEL is the incomparable combination of harmony of forms and functionality of use. Highest quality components fit for specific use, hand assembled..
Check Stock

SureFire HL1-C-TN Helmet Light, 3V, 1.4-19.2 lu, Rd/WH/IR LEDs, Tan

  • SureFire aluminum-body Illumination tools are Machined from a high-strength aerospace aluminum alloy.
  • Polymers are durable, lighter in weight than aluminum and are more comfortable to hold in cold weather.
  • Aluminum oxide is the second-hardest substance known to man, exceeded only by Diamonds.
  • SureFire multi-axis computer numerically Controlled (CNC) lathes ensure precision-machined components.
  • SureFire uses integrating sphere photometers to measure the total lumen output of our Illumination tools.
Check Stock

SureFire HL1-B-TN Helmet Light 3V 1.4-19.2 lu IR/WH/IR LEDs Tan

  • SureFire aluminum-body Illumination tools are Machined from a high-strength aerospace aluminum alloy.
  • Polymers are durable, lighter in weight than aluminum and are more comfortable to hold in cold weather.
  • Aluminum oxide is the second-hardest substance known to man, exceeded only by Diamonds.
  • SureFire multi-axis computer numerically Controlled (CNC) lathes ensure precision-machined components.
  • SureFire uses integrating sphere photometers to measure the total lumen output of our Illumination tools.
Check Stock

SureFire HL1-D-TN Helmet Light 3V 1.4-19.2 lu IR/Yg/IR LEDs Tan

  • SureFire aluminum-body Illumination tools are Machined from a high-strength aerospace aluminum alloy.
  • Polymers are durable, lighter in weight than aluminum and are more comfortable to hold in cold weather.
  • Aluminum oxide is the second-hardest substance known to man, exceeded only by Diamonds.
  • SureFire multi-axis computer numerically Controlled (CNC) lathes ensure precision-machined components.
  • SureFire uses integrating sphere photometers to measure the total lumen output of our Illumination tools.
Check Stock