Top Assembly Shaft Reviews

TEKTON 6943 Precision Pick and Hook Set, 4-Piece

Heat treated, chrome vanadium steel shafts.
Cushioned, non-slip grips for extra control.
Knurled shaft grip area for precise work.
Ideal for assembly, repair, or removal of small parts.
Set Includes: 1-pc. Full Hook, 1-pc. 45-degree, 1-pc. 90-degree, 1-pc. Straight Pick.

Check Stock

Traxxas 1/10 Slash 2WD TITAN 12T BRUSHED 550 MOTOR & 19T PINION GEAR

Titan 12 T 550 Motor (Part # 3785) Includes Two (2) Capacitors and Two (2) Leads with Connectors Specifications Can Diameter: 1.25" (38mm) Shaft Diameter: 0.12" (3mm) Length Including: Shaft 3.2" (81mm) Length Not Including Shaft: 2.3" (57.5mm) Input Battery Voltage: Up to 8.4v Pinion Gear 19T (48 Pitch) with Set Screw (Part # 2419)Buyer agrees to contact manufacturer for all warranty replacements. No term warranty provided by Dollar Hobbyz. No liability shall b.
Includes: Titan 550 12T Motor (Part # 3785) 48P 19T Pinion Gear w/Set Screw - Steel (Part # 2419) - This product is NEW in OEM Retail Packaging..
Important Note: The first image is for illustration purposes only. Please refer to the product description for exact contents..
Requires Assembly: This product is NOT ASSEMBLED. Any assembly pictured is for illustration purposes only..
Part number(s) included (in factory packaging): 3785 2419.

Check Stock

Timken 710596 Axle Shaft Seal

APPLICATION: Compatible with 1998-2004 Ford F-250 F-350 F-450 and F-550 4X4s having the vacuum-operated front axle..
FUNCTION: This tool is necessarily if you want your vacuum locking hubs to work after replacing the axle seals since it prevents front hub vacuum leaks that would cause the 4WD not engage and covers in oil to prevent corrosion..
EASY TO USE: This tool allows you to install and insert the axle shaft seal of your vehicle in its proper depth, distance and position by driving it in with a rubber mallet or hammer onto the wheel knuckle assembly..
MATERIAL: Made of high quality steel, the surface with black oxide finish ensures great strength and durability while resisting rust and corrosion( It is normal that there are iron filings in the groove, if you mind, please buy it carefully )..
REPLACES PART# 6695: Vacuum seals delicately works with the axle shaft and this axle shaft seal tool is produced to ensure proper installation to the wheel knuckle assembly, prevents damages on the new seal, saves time and a lot easier..

Check Stock

Yukon Gear & Axle (YMS8835S) Axle Seal for Differential Bearing, for 1559 OR 6408 bearing, NOT COARSE spline 12T

Replacement Axle Shaft Seal Installer - This special tool allows you to install and insert the axle shaft seal of your vehicle in its proper depth, distance and position by driving it in with a rubber mallet or hammer onto the wheel knuckle assembly. This is applicable for your 1999 F-250, 2000 F-350, 2001 F-450, 2002 F-550 and 2003 Excursion 4x4 vehicle..
Compatible Replacement for Ford Vehicles - 2000, 2001 , 2002, 2003, 2004 Excursion 4x4 | 98, 99, 00, 01, 02, 03, 04 F250 | 98, 99, 00, 01, 02, 03, 04 F350 | 98, 99, 00, 01, 02, 03, 04 F450 | 1998, 1999, 2000, 2001, 2002, 2003, 2004 F550 |. Replacement of the axle shaft seal is necessary after removal when servicing the front-end parts like the u-joints to avoid having issues when engaging 4WD. Installation can be tricky and with a proper tool like this, it will be perfect everytime..
Replaces Part# 6695 commonly found on popular vehicles including year models 1998, 1999, 2000, 2001, 2002, 2003, 2004. This axle shaft seal tool is constructed with high quality steel, black finished and designed with handle and the correct ridges compatible with Ford vehicles. This is applicable to your Excursion 4x4, F-250, F-350, F450 and F-550 vehicles only..
OEM Fit, Quality, Finish - While this is not a genuine....

Check Stock

Revell SnapTite Apache Helicopter Plastic Model Kit Brown

Enhance three dimensional thinking with the construction of this 41-piece model kit.
Learn to plan and evaluate a project by snapping together the pre-painted pieces and applying authentic decals, no paint or glue required.
Kit features 4-bladed main rotor, air data sensor, twin GE t-700 turbo shaft engines, pilot night vision sensor (pnvs).
Recommended for ages 8 years and up.41 detailed dark green parts that snap together - no glue necessary.Four bladed main rotor, air data sensor, twin General Electric t-700 turbo shaft engines, pilot night vision sensor (pnvs), target acquisition and Designation sight (tads), 1200 round capacity 30mm chain gun, plus aerial rockets and 16 hellfire missiles.Bonus stickers are included.Also included is an "adventures built" Collector poster.Illustrated assembly guide.
41 detailed dark green parts that snap together - no glue necessary.
Four bladed main rotor, air data sensor, twin General Electric T-700 turbo shaft engines, pilot night vision sensor (PNVS), target acquisition and designation sight (TADS), 1200 round capacity 30mm chain gun, plus aerial rockets and 16 Hellfire Missiles.
Also included is an "Adventures Built" collector poster.

Check Stock

Heyiarbeit Drive Shaft Fit for 2mm Motor Shaft w Propeller and Universal Joint for RC Boat, L100mm Shaft, L50mm Sleeve, D36mm Propeller

【Parameters】- Shaft length: 10cm/3.94".
Suit for motor shaft diameter: 2mm/0.08".
【High Material】- Remote control boat propeller shaft kit is made of stainless steel, which has good corrosion resistance and wear resistance, and has good sealing performance.
【Advantages】This RC boat drive shaft assemble kit is composed of high quality materials, with speed anti-impact plastic propeller which with light weight and small size designing, is a Good choice for the repairing and replacing of your rc boat..
【Application】- The propeller shaft is suitable for the different types of boats ,simulation compatible with DIY RC model, such as RC boat,RC submarine and so on.
【Note】- This ship assembly is equipped with a bearing between the shaft and the shaft sleeve, which can maintain high strength and high speed when rotating.

Check Stock

ST2000Z 1967-95 forGM Cars Upper Steering Column Snap Ring

【High Quality】The Lower Steering Shaft is exact OE manufactured and can be replaced directly with the original parts in your vehicle. It is made of high quality material and maintain a good strength to give the parts long time performance..
【Universal Joint 】Direct replace your worn or damaged steering shaft, with new U-Joints featuring precision needle bearings for smooth, silent operation and reliable performance..
【Compatibility】This Steering Shaft fits for 004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 Toyota Tacoma 4WD and PreRunner 2WD in Lower Steering Column..
【Replace OE Part】# 4520304021, 45203-04021. This Steering Column Intermediate Shaft will meet or exceed OEM standards, it is a direct replacement though it is NOT a genuine part..
【Warranty】100% satisfaction guarantee, 1 year UNLIMITED REPLACEMENT PROMISE, If you have any issues with the RLower Intermediate Steering Shaft Assembly, simply contact customer service for troubleshooting help, parts, replacement, or refund. Our aim is to make you satisfy the parts and the service we provide for you..

Check Stock

Coleman Cooler Drain Plug for 50, 58 and 82 Qt Xtreme Coolers - 1.5" Shaft Length

Made by Coleman. Compatible with the 50, 58 and 82 Quart Coleman Xtreme Coolers..
The drain plug assembly consists of the following components: Cap, main shaft, and rubber gasket..
Shaft length: 1-1/2". Shaft diameter: 3/4"..
Double check your cooler's drain plug hole size and cooler wall thickness. This is not a universal drain plug for Coleman coolers, as there are other sizes available..

Check Stock

labwork Rear Axle Kit Brake Hub Disc Rotor T8F Chain Sproket Replacement for Go Kart Drift Trike Cart

This is a high class and durable live axle kit, perfect for DIY rebuild go kart quad, trikes or drift bikes.
Fits 6 inch wheels (rim) with 3 bolt pattern and 3 inch bolt to bolt space.
Shaft overall length: 740mm (29 1/8 inch), the thickest part of the shaft is 22mm.
For more size information, refer to the second image.
Package includes: (1) Axle Assembly, (1) Brake Master Cylinder Caliper Assembly, (1) Chain Sprocket, (1) Brake Disc, (2) Pillow Block.

Check Stock

TDPRO Rear Axle Shaft Kit with 6 Wheels Tires Rims Brake Assembly and Chain & Sprocket for Go Kart Quad Trike Drift Bikes

This is a high class and durable live axle kit has almost all the rear-end parts you need.
Perfect for DIY rebuild go kart quad, trikes or drift bikes.
Shaft overall length: 740mm (29 1/8 inch), the thickest part of the shaft is 22mm.
Tubeless wheel spec: 14 1/8" Tall & 5 1/4" wide, with 145/70-6 tire, 6" rim.
Package includes: (1) Axle Assembly, (2) Wheels (with tire, rim, tube), (1) T8F Chian, (1) Brake Master Cylinder Caliper Assembly, (1) Sprocket, (1)....

Check Stock

4 Wheel Trolley Assembly, Stable Welded Roller Trolley for 1-5/8' Wide and All 1-5/8' or Taller Strut Channel (4)

Heavy Duty Build: Our roller trolley assembly is made using highs strength solid steel that’s impact resistant and zinc galvanized to offer protection against rust and corrosion. It features a solid bearing steel pin shaft in the strut channel as well.
Secure And Stable Performance: The four bearing trolley assembly features a welded bearing and pin shaft to offer more stability for secure use. It uses deep groove ball bearings to make sure you can operate it smoothly without making any noise.
For Long Term Use: Each pack comes with 2 beam trolleys that offer just the right balance of quality, durability, and performance. They offer low noise operation as well as being galvanized to provide smooth opening/closing even in the long term.
Versatile And Multi-Purpose: Each 4 wheel trolley assembly offers 450 lbs weight support and is suitable for use with 1-5/8" Wide and All 1-5/8" or Taller Strut Channel. It has a Diameter Hole of 9/16" (14mm) and 1/4" (6mm) Thickness.
We Have Your Back: If you have any issues with the trolley assembly 4 wheel then just let us know and we will help you resolve them quickly to ensure you are completely satisfied. Please Note: It’s recommended that you use the strut channel horizontally.

Check Stock

The ROP Shop Trailer Axle Kit Assembly with 4 on 4" Bolt Idler Hub & 1" Round BT8 Spindle

Replacement Trailer Axle Kit Assembly with 4 on 4" Bolt Idler Hub & 1" Round BT8 Spindle.
Specs - 1,250 lb Hub Capacity, Used On 2,000 lb Axle Shaft 1 Diameter: 1 1/4" Shaft 2 Diameter: 1" Shaft Length: 8 3/4" (4" Long Stub) Hub A Diameter.: 2 1/2" Hub B Diameter: 5 1/2" Bolt Pattern: 4". Refer to images 2 & 3 for more information.
Includes - (1) Idler Hub with Lug Nuts, (1) 1" BT8 Round Spindle with Castle Nut, Pin & Washer, (2) Inner/Outer Bearings, (1) Double-lip Grease Seal (1 1/4" I.D. / 2" O.D.), (1) 2" Grease/Dust Cap.
Assembly with 4 on 4" bolt idler hub & 1" round BT8 spindle. Rated to 1,250 lbs. each or 2,000 lbs. for the pair.
Fits 2,000 pound trailer axles with straight spindles, but to know if this hub is the right fit for your setup you would want to check the size your current bearings and make sure that they match up with the 1" bearings that these hubs come with as well as knowing that you have a standard length spindle. This Hub fits standard length spindles, not "short spindles".

Check Stock

WPHMOTO Rear Axle Shaft Kit with 6 Tubeless Wheels Tires Rims Brake Assembly and Chain & Sprocket for Go Kart Quad Trike Drift Bikes

This is a high class and durable live axle kit has almost all the rear-end parts you need.
Perfect for DIY rebuild go kart quad, trikes or drift bikes.
Shaft overall length: 740mm (29 1/8 inch), the thickest part of the shaft is 22mm.
Tubeless wheel spec: 14 3/4" Tall & 5 1/2" wide, come with 145/70-6 tire, 6" rim.
Package includes: (1) Axle Assembly, (2) Wheels (with tire, rim), (1) T8F Chian, (1) Brake Master Cylinder Caliper Assembly, (1) Sprocket, (1) Brake....

Check Stock