Top Asme Fitting Reviews

Porter Cable C2002/C2005 Air Compressor OEM (2 Pack) Replacement A17038 Drain Valve # N286039-2pk

SV150 Safety Pop Up Valve 150 PSI ASME CODED.
Please contact us if you need more than one. We offer discount on higher quantities..

Compact manual lever hoist and hook mount with all-steel construction for strength.
low headroom for work in small spaces and at any angle.
Spring-loaded freewheel facilitates rapid adjustment of load chain with one hand, and helps prevent accidental freewheeling when a load is on the chain.
Mechanical brake with two moisture-resistant brake pads, four braking surfaces, and two brake pawls to help ensure reliability.
Factory load tested to 125% of rated capacity in accordance with ANSI/ASME requirements.
Complies with ANSI/ASME B30.21 and ANSI/ASME HST-3M standards.

LIFETIME LIMITED WARRANTY: You can install with confidence, knowing this bathroom faucet is backed by Delta Faucet's Lifetime Limited Warranty.
LASTS 2X LONGER: DIAMOND Seal Technology uses a patented design to reduce leak points and last twice as long as the industry standard (Industry standard is based on ASME A112.18.1 of 500,000 cycles).
SUPPLY LINES INCLUDED: InnoFlex PEX supply lines are integrated into the faucet for one less potential leak point and are conveniently included in the box.
REDUCE LEAKS: DIAMOND Valve, a diamond-embedded ceramic disc, requires no lubrication and eliminates wear on seals, so you can rest assured that this faucet will perform like new for life.Fitting type:3/8 inch compression fittings.
EASY INSTALLATION: Designed to fit 3-hole, 4" Centerset configurations. Everything you need is together in one box, including coordinating metal pop-up drain assembly.

Compact manually operated chain hoist and hook mount with aluminum body, steel frame, and low headroom for strength, work in small spaces, and to fit into mobile storage carriers.
Low pulling force requirement to facilitate use.
Load limiter helps prevent lift operation when load exceeds rated capacity for added safety and to avoid damage.
Grade 100 nickel-plated load chain for resistance to corrosion and wear.
stainless steel hand chain for resistance to wear.
Factory load tested to 125% of rated capacity in accordance with ANSI/ASME B30.16 requirements.
built to comply with ANSI/ASME B30.16 and ANSI/ASME HST-2M standards.

Manually operated chain hoist and hook mount with die-cast aluminum body, heat-treated pinion shaft and load gear, pre-lubricated sealed ball bearings, and precision machined gears for strength, simplified maintenance, and smooth lifting.
Load chain made of heat-treated manganese alloy to resist abrasion and minimize chain weight.
mount hook and load hook made of forged, heat-treated alloy steel to resist fracture under stress.
Load brake with two moisture-resistant brake pads and four braking surfaces to help ensure smooth lifting.
Factory load tested to 125% of rated capacity in accordance with ANSI/ASME B30.16 requirements.
Complies with ANSI/ASME B30.16 and ANSI/ASME HST-2M standards.

Manufactured from Crestoloy alloy steel for better strength and longer tool life.
Meets or exceeds ANSI and ASME specifications.
Off-corner loading design reduces fastener rounding.
Nickel Chrome Plated for Long Lasting Finish.

Accurate results are +/- 1 percent of rated temperature.
Easy to Use melts at designated temperature for easy visual inspection.
Superior quality free of contaminants such as Sulfur, Lead and halogens.
Traceable each marked by temperature, lot Number and is NIST traceable.
Complain Meets aws D1.1, ASME Code sec. I, III and viii, ANSI/ASME Code B31.1 and B31.7.

Accurate results are +/- 1 percent of rated temperature.
Easy to Use melts at designated temperature for easy visual inspection.
Superior quality free of contaminants such as Sulfur, Lead and halogens.
Traceable each marked by temperature, lot Number and is NIST traceable.
Complain Meets aws D1.1, ASME Code sec. I, III and viii, ANSI/ASME Code B31.1 and B31.4.

Accurate results are +/- 1 percent of rated temperature.
Easy to Use melts at designated temperature for easy visual inspection.
Superior quality free of contaminants such as Sulfur, Lead and halogens.
Traceable each marked by temperature, lot Number and is NIST traceable.
Complain Meets aws D1.1, ASME Code sec. I, III and viii, ANSI/ASME Code B31.1 and B31.3.

Accurate results are +/- 1 percent of rated temperature.
Easy to Use melts at designated temperature for easy visual inspection.
Superior quality free of contaminants such as Sulfur, Lead and halogens.
Traceable each marked by temperature, lot Number and is NIST traceable.
Complain Meets aws D1.1, ASME Code sec. I, III and viii, ANSI/ASME Code B31.1 and B31.9.

Accurate results are +/- 1 percent of rated temperature.
Easy to Use melts at designated temperature for easy visual inspection.
Superior quality free of contaminants such as Sulfur, Lead and halogens.
Traceable each marked by temperature, lot Number and is NIST traceable.
Complain Meets aws D1.1, ASME Code sec. I, III and viii, ANSI/ASME Code B31.1 and B31.11.

Accurate results are +/- 1 percent of rated temperature.
Easy to Use melts at designated temperature for easy visual inspection.
Superior quality free of contaminants such as Sulfur, Lead and halogens.
Traceable each marked by temperature, lot Number and is NIST traceable.
Complain Meets aws D1.1, ASME Code sec. I, III and viii, ANSI/ASME Code B31.1 and B31.12.

Accurate results are +/- 1 percent of rated temperature.
Easy to Use melts at designated temperature for easy visual inspection.
Superior quality free of contaminants such as Sulfur, Lead and halogens.
Traceable each marked by temperature, lot Number and is NIST traceable.
Complain Meets aws D1.1, ASME Code sec. I, III and viii, ANSI/ASME Code B31.1 and B31.14.