Top Articulated Lift Workshop Machinery Reviews

2.5\ x 10' Ultra Flex Clear Vue Heavy Duty PVC Dust Debris and Fume Collection Hose MADE IN USA!

  • ...plications where dust and chips from cutting, milling or sanding wood is a problem. This heavy-duty hose will stand up to small and large chunks of wood without getting punctured as well as handle the smallest of saw dust without leaking. PVC hose can be used as a primary line or can be plugged into and out of machinery as needed..
  • PVC Hose (depending on diameter) can be used with dust collectors, shop vacuums, industrial vacuum systems, lawn tractor leaf catchers and a whole lot more! Simply make sure both ends of the hose are secured with hose clamps and your ready to go. The PVC hose flexes enough to weave in and out of shop machinery or table legs without kinking. Its also sturdy enough that it won’t flatten out when the dust collector is turned on. The hose has a compression ratio of 3: 1..
  • This PVC hose is clear which allows you to see what’s going on inside the hose while the dust and debris are flowing through it. Not only can you see the dust and debris, you can also see if any build up or blockage has occurred. Being able to see this makes fixing any suction issues with the hose much easier than typical opaque hoses..
  • While PVC Hose can be used on other machinery or devices it has been designed for dust collection purposes. The hose t....
Check Stock

YJINGRUI LED Industrial Signal Tower Light 3 Colors Flash LED 180°Folding Light with Buzzer Alarm Warning Lamp for CNC Machines Red Yellow Green 100db (DC 24V)

  • LUBAN Industrial Signal Stack Tower Lights, adopting high performance LED chips as the light source to provide high brightness light with lower power consumption and at least 50,000 hours long lifespan.
  • This Tower Light equipped with prism-cut PC lampshade lenses for even light distribution, it has a 360-degree viewing angle, with a height adding pole, it's easily viewed at a distance in the workshop.
  • Each level equips 3x3 continuous light LED chips in 3 different directions, 90dB hi-frequency buzzer alarm optional for adding an audible warning to be heard above the noise of surrounding machinery.
  • Standard aluminium pole length 6 inches with L-bracket for mounting installation (When not using an L-bracket, make a fitting hole of φ18-20mm).
  • These Andon Lights for use in factories or on industrial machinery. Typically used as Automated machinery status indicator lights, operation signal lights, safety warning lights.
Check Stock

2 1/2 x 20 Clear PVC Dust Collection Hose For Use with Dust Collectors with 2-1/2 Ports Ideal for Shop Vacuums

  • ...plications where dust and chips from cutting, milling or sanding wood is a problem. This heavy-duty hose will stand up to small and large chunks of wood without getting punctured as well as handle the smallest of saw dust without leaking. PVC hose can be used as a primary line or can be plugged into and out of machinery as needed..
  • PVC Hose (depending on diameter) can be used with dust collectors, shop vacuums, industrial vacuum systems, lawn tractor leaf catchers and a whole lot more! Simply make sure both ends of the hose are secured with hose clamps and your ready to go. The PVC hose flexes enough to weave in and out of shop machinery or table legs without kinking. Its also sturdy enough that it won’t flatten out when the dust collector is turned on. The hose has a compression ratio of 3: 1..
  • This PVC hose is clear which allows you to see what’s going on inside the hose while the dust and debris are flowing through it. Not only can you see the dust and debris, you can also see if any build up or blockage has occurred. Being able to see this makes fixing any suction issues with the hose much easier than typical opaque hoses..
  • While PVC Hose can be used on other machinery or devices it has been designed for dust collection purposes. The hose t....
Check Stock

4 inch diameter x 10 foot long Ultra Flex Clear Vue Heavy Duty PVC Dust Debris and Fume Collection Hose MADE IN USA!

  • ...plications where dust and chips from cutting, milling or sanding wood is a problem. This heavy-duty hose will stand up to small and large chunks of wood without getting punctured as well as handle the smallest of saw dust without leaking. PVC hose can be used as a primary line or can be plugged into and out of machinery as needed..
  • PVC Hose (depending on diameter) can be used with dust collectors, shop vacuums, industrial vacuum systems, lawn tractor leaf catchers and a whole lot more! Simply make sure both ends of the hose are secured with hose clamps and your ready to go. The PVC hose flexes enough to weave in and out of shop machinery or table legs without kinking. Its also sturdy enough that it won’t flatten out when the dust collector is turned on. The hose has a compression ratio of 3: 1..
  • This PVC hose is clear which allows you to see what’s going on inside the hose while the dust and debris are flowing through it. Not only can you see the dust and debris, you can also see if any build up or blockage has occurred. Being able to see this makes fixing any suction issues with the hose much easier than typical opaque hoses..
  • While PVC Hose can be used on other machinery or devices it has been designed for dust collection purposes. The hose t....
Check Stock

5\ x 10' (5 inch diameter by 10 feet long) Ultra-Flex Clear Vue Heavy Duty PVC Dust, Debris and Fume Collection Hose - MADE IN USA!

  • ...plications where dust and chips from cutting, milling or sanding wood is a problem. This heavy-duty hose will stand up to small and large chunks of wood without getting punctured as well as handle the smallest of saw dust without leaking. PVC hose can be used as a primary line or can be plugged into and out of machinery as needed..
  • PVC Hose (depending on diameter) can be used with dust collectors, shop vacuums, industrial vacuum systems, lawn tractor leaf catchers and a whole lot more! Simply make sure both ends of the hose are secured with hose clamps and your ready to go. The PVC hose flexes enough to weave in and out of shop machinery or table legs without kinking. Its also sturdy enough that it won’t flatten out when the dust collector is turned on. The hose has a compression ratio of 3: 1..
  • This PVC hose is clear which allows you to see what’s going on inside the hose while the dust and debris are flowing through it. Not only can you see the dust and debris, you can also see if any build up or blockage has occurred. Being able to see this makes fixing any suction issues with the hose much easier than typical opaque hoses..
  • While PVC Hose can be used on other machinery or devices it has been designed for dust collection purposes. The hose t....
Check Stock

6 x 10 6 inch diameter by 10 feet long Ultra-Flex Clear Vue Heavy Duty PVC Dust Debris and Fume Collection Hose - MADE IN USA!

  • ...plications where dust and chips from cutting, milling or sanding wood is a problem. This heavy-duty hose will stand up to small and large chunks of wood without getting punctured as well as handle the smallest of saw dust without leaking. PVC hose can be used as a primary line or can be plugged into and out of machinery as needed..
  • PVC Hose (depending on diameter) can be used with dust collectors, shop vacuums, industrial vacuum systems, lawn tractor leaf catchers and a whole lot more! Simply make sure both ends of the hose are secured with hose clamps and your ready to go. The PVC hose flexes enough to weave in and out of shop machinery or table legs without kinking. Its also sturdy enough that it won’t flatten out when the dust collector is turned on. The hose has a compression ratio of 3: 1..
  • This PVC hose is clear which allows you to see what’s going on inside the hose while the dust and debris are flowing through it. Not only can you see the dust and debris, you can also see if any build up or blockage has occurred. Being able to see this makes fixing any suction issues with the hose much easier than typical opaque hoses..
  • While PVC Hose can be used on other machinery or devices it has been designed for dust collection purposes. The hose t....
Check Stock

Heavy Duty Leveler Legs w/Lock Nuts - Leveling Feet for Furniture, Cabinets, & Workbench - 4 Pack

  • HEAVY DUTY - Made from 14 ga. (.080") steel. Load capacity is 2,000 lbs. per leg.
  • INTEGRAL LEDGER - Ensures that the load is carried by the leveler, not the screws.
  • LOCK NUTS INCLUDED - An absolute MUST for the workshop or garage, especially if any vibrating machinery is involved..
  • FREE SPINNING FOOT - Compensates for irregular floors. Polyethylene cap protects floors as it keeps moisture away.
  • YOU GET - 4 Legs, 16 Installation screws (#10 x 3/4"), 5mm hex wrenchDescriptionGot a 8,000 lb. workbench that needs leveling?... Read On!.
  • D.H.S. is pleased to offer a leveler that's tough as nails, but as easy to install as it is to adjust..
  • Housings are made from 14 ga. (.080"), zinc plated steel. Each has a 7/16" wide ledger that hooks under the cabinet. This ensures the load gets carried directly on the leveler, not the screws. BTW the screws we provide are no joke. They're 3/4" long #10 Philips head (nickel plated), perfect for supporting a bookcase with plywood sides or a workbench with 4 x 4 legs..
  • The legs have a 10mm dia. (a heavy 3/8") shaft that adjusts from 0" to 2-1/2". The feet are 1-1/4" dia. and spin freely on the threaded shaft. This allows them to tilt if your floor is really bad. Adjustments are easier too, as y....
Check Stock

JEGS Air Over Hydraulic Air Jack - 22 Ton Air Hydraulic Floor Jack (44,000lbs) Capacity - 120 to 200 PSI Operating Range - Yellow Steel Heavy Duty Air Hydraulic Jack

  • Ideal for lifting cars, trucks, farm vehicles, heavy-duty machinery, industrial equipment, and more up to 22 tons..
  • Lift Range: 9 to 17 inches. Raise your load to your desired height, while the extension screw helps you fine-tune height from there..
  • Compact, but mighty design easily slips into small spaces while not sacrificing the lift capacity of the 22 ton air jack..
  • Includes: (1) 50 in. 3-Position Handle, (1) 4 ft. x 3/8 in. Air Hose, (2) 8 in. Wheels..
  • Ideal for lifting axles, farm vehicles, heavy-duty machinery, industrial equipment, and more..
Check Stock

Aicosineg M6 x 12mm Male Thread Aluminum Alloy Adjustable Clamping Lever Handle for Machinery Welding Printing Equipment Black Tone 1pcs Not Include Washer

  • 【MATERIAL】- The adjustable clamping handle is made of high-quality aluminum alloy, with good durability and rust resistance, light weight and corrosion resistance.
  • 【FEATURE】- The adjustable clamping handle adopts superb craftsmanship, each edge can accurately lock the screw without damaging the screw.
  • Just lift the handle of these ratchet buttons to loosen the gear teeth and rotate freely for quick adjustment.
  • 【ADVANTAGE】- This handle is particular for the lever turning angle is limited, owing to lack of space, it is thr ideal tool for lever turning.
  • 【APPLICATION】- These handles are perfect to be used in application requiring frequent and quick adjustments and when working in confined areas.
  • It is widely used in the necessary parts of packaging machinery and equipment, universal knife sharpeners, machine tools, welding equipment, printing equipment, woodworking machinery, packaging machinery, dyeing equipment and other machinery.
Check Stock

LEGO City Tuning Workshop Toy Car Garage 60258, Cool Building Set for Kids, New 2020 (897 Pieces)

  • This multi-model LEGO City Tuning Workshop playset is perfect for car lovers and comes with a workshop, an array of cool vehicles, and fun characters for imaginative independent play!.
  • Features a toy garage, camping trailer and cool vehicles, including a tow truck, hot rod and rocket-powered motorbike, plus 7 minifigures, including LEGO City TV characters Tread Octane and Harl Hubbs.
  • Kids can operate the engine hoist in the workshop, lift cars with the jack, rescue broken-down vehicles with the tow truck, and they can combine this set with other LEGO playsets for fun play and display.
  • This LEGO City building set sparks imagination, offers endless build-and-play fun, and is an action-filled holiday, birthday or anyday gift for kids ages 5+ who like mechanic garages, cars, trucks and motorbikes.
  • When built, Tread Octane’s workshop measures over 5” (14cm) high, 6” (17cm) wide and 5” (13cm) deep, and the tow truck measures over 2″ (7cm) high, 7″ (18cm) long and 2″ (6cm) wide.
Check Stock

LEGO Technic 42030 Remote Controlled Volvo L350F Wheel Load

  • Remote-control replica of the powerful Volvo L350F wheel loader. 2-in-1 model: rebuilds into a Volvo A25F articulated hauler.
  • Features a detailed 6-cylinder Volvo-green engine with moving pistons and fan, articulated servo steering, working lift arm, and a tipping bucket.
  • Activate the double remote-controlled Power Functions motors for powerful, simultaneous driving and digging action - just like the real machine!.
  • Includes LEGO Power Functions components: servo motor, XL-motor, large motor, medium motor, battery box, 2 remote controls and 2 infrared receivers.
  • Volvo L350F (with bucket lowered) measures over 9" high, 22" long and 6" wide. Volvo A25F measures over 9" high, 19" long and 6" wide.
Check Stock

K2 Pumps UTS03301K 1/3 HP Compact Utility Sink Pump System

  • Follow installation instructions carefully to insure successful operation!.
  • Perfect for draining basement wet bars, or laundry, workshop and utility sinks.
  • System includes: pump assembly, sink drain screen, slip check valve and ball valve.
  • Removes water at 1,300 GPH at 0 feet of lift, with a maximum lift of 15 feet.
  • Easy to install – eliminates the need for traps and vents.
Check Stock

Master Magnetics 7583 Magnetic Cup Caddy Holder - Black - Keep Your Favorite Beverage at Hand

  • Magnetic Cup Caddy allows you to keep your favorite beverage at hand, whether in the garage, workshop, office, outdoors and more!.
  • Powerful magnet attracts to any ferrous metal surface including toolboxes, filing cabinets, grills, or even heavy machinery and equipment!.
  • Extremely versatile! The Caddy holds travel mugs, aluminum cans, water bottles, pray cans, pens, pencils, small tools and more!.
  • Made of durable plastic with a protective rubber liner to prevent surface scratches..
  • Measures: 4.75”l x 3.5”. Holds containers up to 3.25” dia. at base..
Check Stock