Top Apricorn Drive Wire Reviews

New 2021 Model Cyclone 140E MIG Welder 110 volts FLUX Core capable 140AMP

  • IGBT INVERTER // CAST ALLOY DRIVER ROLLER // 135A/21V @ 35% Duty Cycle/40º C.
  • Spool Gun READY / Drive Roll wire size: .023”-.035” // Tweco Style Gun.
  • Stepless control of both the wire speed and voltage. No tapped settings.
  • Designed to be used with both 4" and 8" Wire Spools /.
  • Standard drive rolls can feed .023"-.035" Wire diameter.
Check Stock

Tool Parts 25mm Diameter Wire Feed Drive Roller Roll Wheel .030'-.035' For Mig Welders For Clarke, SIP, MIG100/130/160/180/200

  • Package Includes: 1*Wire Feed Drive Roller | Notes: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness. |.
  • 25mm Diameter Wire Feed Drive Roller Roll Wheel .030"-.035" for Mig Welders.
  • Fits for many standard build MIG welders such as for Clarke, SIP, MIG100/130/160/180/200 etc..
  • Welder wire feed drive roller roll parts 0.8-0.9 Knurled-Groove .030"-.035".
Check Stock

Wolo (MCHWK-2) Air Horn Wiring Kit

  • Makes installation of any direct drive air horn (no tank) easy, trouble free and professional, without any special tools.
  • The kit is designed to easily hook-up a direct drive air horn to the vehicles factory horn system.
  • Included in the kit is all that is required to install a direct drive air horn.
  • wire harness with quick connect plug for the relay, terminals, in-line fuse, plastic wire ties and easy to follow instructions in English / Spanish.
  • Ideal for any 12-volt car, motorcycle, truck, etc.
Check Stock

TEKTON 10-1/2 Inch Fencing Pliers | PSP10010

  • STAPLE AND NAIL PULLER: The parallel jaws can grip the crown of a staple or the head of a nail and easily pry them out.
  • WIRE SPLICER: Use the top and bottom jaws to isolate two strands of wire for splicing or separating.
  • the bottom jaws are large enough to grip and twist multiple strands of wire.
  • STAPLE STARTER: Use the two jaw openings to hold a staple in place and drive it with a hammer.
  • start a staple with one hand by gripping it in the upper jaws and swinging it into the post.
  • STRIKING FACE: The flat surface is less prone to chipping and deformation than a serrated surface.
  • hit the striking face with a hammer to drive the claw under a staple.
  • STAPLE CLAW: The longer, more pointed claw gives better access for prying out staples.
Check Stock

(2-Pack) COMeap 3.5

  • 3.5" Floppy 4 Pin - SATAFloppy 4 pin female end to plug into 3.5" floppy drive port, SATA end to plug into hard drive.
  • ConnectorConnector A: 1x Floppy 4 pin female, Connector B: 1x SATA.
  • CompatibilityCompatible with 3.5" floppy drive disk.
  • ParameterLength(including connectors): 7.3-inch(18.5cm)(approx), Gauge: 1007-18AWG(standard tin-coating copper wire), Quantity: 2pcsSelf-adhesive tape*1pcs.
  • NoteThis cable was only designed for 3.5" floppy drive disk.
Check Stock

【2 Pack】 T THKAIVEQI Earbud & in-Ear Headphones Compatible for iPhone and Android Smartphones Earphones Noise Cancelling Stereo Wired 3.5mm Earbuds with Microphone

  • Speaker: The mini speaker unit for this headset. It is made of magnetic material and assembled in a stack line way, which has both bass and clear....
  • Tow keys drive-by –wire : touch comfortable, simple and practical tow keys drive-by-wire, convenient operation.
  • Silicone ears wear comfortble : combined with in-ear headphones advantages, adopt human ear canal tilt angle data , headset deep into ear canal, wear....
  • Wire rod: oxygen free copper wire material, with efficient audio transmission performance, to ensure sound quality transmission is not damaged.....
  • Wide Compatibility: Suitable for most 3.5mm headphone jack devices, such as Android, IOS devices, MP3, MP4, MAC, tablet, laptop, desktop, portable....
Check Stock

Dewalt DWHT75021 Heavy Duty Electirc 5-in-1 Multi-Tacker

  • 5 tools in 1. Uses Heavy Duty, Narrow Flat Crown, Cable staples, 18 GA brads as well as 18 GA headless pins.
  • The High/Low power switch allows for the tool to drive fasteners into hard and soft materials ranging from Oak to Pine.
  • Drive staples accurately over wire with its integrated wire guide.
  • Contact-Trip Switch will only allow a staple/brad nail to fire if pressed against a work surface.
  • Bottom load for easy refill with 8ft. Cord.
Check Stock

Hobart Handler 125

  • Broad output range of 25 – 130 amps. Allows you to weld up to 1/8 in. Steel with flux-cored wire..
  • Four output voltage settings. Provides a broad operating window for each wire, with quick and easy adjustment for different thickness and joints..
  • Factory-installed Gas solenoid. Makes it easy to change from flux-cored wire to MIG welding.
  • Built-in Contactor. Eases use and excellent safety feature which makes wire electrically “cold” until gun-trigger is pulled..
  • Durable feed head with quick-release drive roll tension lever. Positive feed with adjustable tension Plus easy accessibility to thread new wire..
Check Stock

StripMeister E2000x Wire Stripper Machine - Wire Stripping Machine Scrap Cable Stripper for Wire Recycling, 72 Pound Heavy-Duty #18 to 2000mcm wire stripping capacity with Variable Speed Control

  • ... quickly and safely. The spiral groove Ultra Grip Feeder ensures precise cuts even on twisted or stranded wires..
  • Simple Operation: One-key control, one-key switch. An industry first, our industrial grade automatic wire stripper, features a 1HP DC motor with variable speed drive yet plugs into any 120 V AC Outlet. The newly designed PWM variable speed-controlled DC-drive makes the machine run quietly, smoothly, and energy-efficient. It also includes an Emergency Stop button to increase safety that can be easily operated. Remember, always be careful, NEVER put your fingers in when it's on!.
Check Stock

(2-Pack) COMeap 4 Pin LP4 5.25

  • 5.25" molex - 3.5" floppy 4 PinMolex end to plug into Fan, floppy 4 pin female end to plug into 3.5" floppy drive.
  • ConnectorConnector A: LP4 molex, Connector B: 1x floppy 4 pin female.
  • CompatibilityCompatible with 3.5" floppy drive disk.
  • ParameterLength(including connectors): 7.5-inch(19cm)(approx), Gauge: 1007-18AWG(standard tin-coating copper wire), Quantity: 2pcsSelf-adhesive tape*1pcs.
  • NoteThis cable was only designed for 3.5" floppy drive disk.
Check Stock

BOXO USA Heavy Duty Toolbox 103 Piece MotoBox Tool Box with Locking System - Black

  • Our New MotoBox has everything you need to make sure your bike is dialed in..
  • Designed for professionals and the weekend warriors, it's the perfect set up to have in the pit or in the back of the truck..
  • 12-Piece 1/4" Metric drive 6-Point socket set (4, 5, 5.5, 6, 7, 8, 9, 10, 11, 12, 13, 14mm). 7-Piece 3/8" Metric drive 6-Point socket set (15, 16, 17, 18, 19, 20, 21mm). 5-Piece 1/2" Metric drive 6-Point socket set (22, 24, 27, 30, 32mm). 10" Groove joint water pump pliers. 6" Long nose pliers. 7" Heavy-duty diagonal side cutter. 5-1/2" Scissors. 4" Flush cutter. 6-Piece 1/4" Drive screwdriver set (SL3, SL4, SL5.5, SL6.5, PH1 & PH2)..
  • 15-Piece Metric combination wrench set (6, 7, 8, 9, 10, 12, 13, 14, 15, 17, 18, 19, 20, 21, 22, 23, 27mm). 1/4" and 3/8" Drive 90-Tooth ratchet wrenches. 3-Piece 1/4" Drive socket extension bars (2", 4", 7" lengths). 2-Piece 3/8" Drive socket extension bar (4", 7" lengths). 1/2" Drive socket extension (3" length). 1/4" Drive Universal joint. 3/8" Drive to 1/4" Drive adapter. 3/8" Drive to 1/2" Drive adapter. 1/2" Drive Swivel handle (15" length)..
  • 7-Piece ¼” Drive hex bit and torx sockets (H3, H4, H5, H6, T15, T20, T25). 11-Piece 3/8" drive hex bit and torx sockets (H5, H8, H9, H10, H12, T27, T30, T40, T45, T50, T55). 2-....
Check Stock

SOONALL Fishing Spinning Reel, Ultralight Fast Speed Premium Magnesium Frame Fishing Reel, 5000 Series Spool 5.1:1 Carp Fishing Reel Metal Line Cup Sea Tackle for Sea/Ice Fishing

  • Durable Material: Made of aluminum alloy material, wear resistance, sturdy, durable and long service life..
  • SG‑5000 Type: Large capacity metal wire cup, lightweight wire cup, reduce weight and sense of body..
  • CNC Metal Digital Rocker Arm: It is carved from a whole piece of alloy, which makes the angler confident in exerting force..
  • Drive Optimization: Metal gears, create a more powerful internal drive system, and optimize the matching of drive gears to twist bars..
  • Easy to Operate: The center of gravity is close to the rear, which improves the integration with the fishing rod, reduces the fatigue of the fisherman, and improves the operability of the fishing rod..
Check Stock

SpoolRunner 200 Spool Gun

  • Easily load and unload wire with the use of the pressure lever..
  • Quickly access the wire compartment with the hinged flip up cover..
  • Monitor the wire usage with the clear spool cover. Heavy-duty drive motor and cast aluminum gearbox..
Check Stock