Top Ansi Socket Flange Reviews

Powerbuilt Heavy Duty 2-Ton Bottle Jack, 4000-Pound Capacity Hydraulic Car Lift, Vehicles, Trucks, Red 640405

  • Forged steel saddle and cast handle socket.
  • 2 ton bottle jack has a strong forged iron saddle with a lifting range of 6-3/16 in. To 12-1/16 in.
  • The stable oversized cast iron base helps prevent tipping.
  • Strong construction makes for a durable Lift.
  • Strong construction makes for a durable lift.
  • Lifting range: 6-3/16 inch to 12-1/16 inch.
Check Stock

M6 x 10mm 12mm 16mm 20mm 25mm Flanged Button Head Socket Cap Screws 304 Stainless Steel 18-8 Bright Finish Fully Threaded 50 PCS

  • The flanged button head socket screws are 100% stainless steel 18-8 (304) which offers a high level of chemical and corrosion resistance..
  • The low domed head with a wider bearing surface offer a finished appearance, making them an ideal choice when a neat appearance is desired..
  • Thread Length: 10mm, 12mm, 16mm, 20mm and 25mm..
  • Package Included: M6 x 10mm (10 PCS), 12mm (10 PCS), 16mm (10 PCS), 20mm (10 PCS), 25mm (10 PCS), and all come in a quality plastic storage box..
  • Flange Button Head Socket Screws are great to have around for use in wood and wet environments..
Check Stock

DEWALT Drive Socket Set, SAE/Metric, 1/4-Inch Drive, 25-Piece (DWMT73805)

  • SAE & Metric Socket Set Comes with Lockable Stacking Cases.
  • Removable Internal Tray is Available with the Mechanic Socket Set.
Check Stock

VIGRUE M6-1.0 x 12/16/20/25/30mm Flanged Button Head Socket Cap Screws 210PCS Stainless Steel 18-8 304 Flange Internal Hex Screws Bolts Nuts Washers Set Kit Full Coarse Thread

  • ✔ Screw Type: Flanged Button Head Screw--ISO 7380-2.
  • Screw Length: 12mm, 16mm, 20mm, 25mm, 30mm.
  • ✔ Package: 210PCS M6 Flange Button Head Socket Cap Screws Nuts wahsers kits.
  • ✔ This kind of screw with low domed button head and a wider flange bearing surface offers good performance, great choice for neat appearance needing..
  • ✔ The flanged button head socket screws are 18-8 stainless steel 304, which offers superior rust and corrosion resistance, with fine workmanship, for a long time use..
Check Stock

1/2 Inch Drive x 35 mm 6-Point Impact Socket

  • Size is marked both with a high-visibility laser marking and a permanent stamped marking that won't wear off.
  • 6-point socket opening provides an exact fit for hex fasteners.
  • Radiused corners prevent fastener round-off by applying force to a fastener's flat sides, rather than its corners.
  • Meets a minimum of 1.3 times the ANSI/ASME standard for proof torque.
Check Stock

Powerbuilt 642027 1/2-Inch Drive by 35mm Socket

  • Made to be the most reliable tools in the market today.
  • 12 point thin wall mirror polished chrome vanadium socket with dual grease rings.
  • Oversized socket size callout forged into socket wall.
  • Z-Drive hex design contacts flat walls of fasteners for stronger grip.
Check Stock

TEKTON 1/2 Inch Drive x 34 mm 6-Point Impact Socket | SID22134

  • Size is marked both with a high-visibility laser marking and a permanent stamped marking that won't wear off.
  • 6-point socket opening provides an exact fit for hex fasteners.
  • Radiused corners prevent fastener round-off by applying force to a fastener's flat sides, rather than its corners.
  • Meets a minimum of 1.3 times the ANSI/ASME standard for proof torque.
Check Stock

TEKTON 1/2 Inch Drive x 34 mm Deep 6-Point Impact Socket | SID23134

  • Size is marked both with a high-visibility laser marking and a permanent stamped marking that won't wear off.
  • 6-point socket opening provides an exact fit for hex fasteners.
  • Radiused corners prevent fastener round-off by applying force to a fastener's flat sides, rather than its corners.
  • Meets a minimum of 1.3 times the ANSI/ASME standard for proof torque.
Check Stock

TEKTON 1/2 Inch Drive x 19 mm Deep 12-Point Impact Socket | SID23319

  • Size is marked both with a high-visibility laser marking and a permanent stamped marking that won't wear off.
  • 12-point socket opening provides an exact fit for 12-point fasteners.
  • Radiused corners prevent fastener round-off by applying force to a fastener's flat sides, rather than its corners.
  • Meets a minimum of 1.3 times the ANSI/ASME standard for proof torque.
Check Stock

The Broken Earth Trilogy: The Fifth Season, The Obelisk Gate, The Stone Sky

  • Mechanic socket set comes in locking, stackable case with removable inner tray.
  • Metric socket set 3/8-inch drive exceeds ANSI specifications.
  • Socket set metric and standard has 72 tooth count ratchet providing a 5 degree arc swing for maneuverability in restricted areas.
  • Clear identification on sockets with hard stamped markings.
  • Control while handling sockets with knurled rings.
Check Stock

DEWALT Socket Set 1/4-Inch & 3/8-Inch Drive SAE/Metric 34-Piece DWMT73804

  • Mechanic socket set comes in locking, stackable case with removable inner tray.
  • Metric socket set 3/8-inch drive exceeds ANSI specifications.
  • Socket set metric and standard has 72 tooth count ratchet providing a 5 degree arc swing for maneuverability in restricted areas.
  • Clear identification on sockets with hard stamped markings.
  • Control while handling sockets with knurled rings.
Check Stock

ISOtunes Wired Earplug Headphones, Recently Improved, 29 NRR, Noise Cancelling Mic, IPX5 Waterproof, Ultra-Durable Braided Wire, OSHA Compliant Noise Isolating Earbuds

  • ❎ BLOCK NOISE: ISOtunes proprietary TRILOGY heat-activated memory foam eartips maximize noise isolation, comfort, and sound quality. ISOtunes Wired comes with 3 pairs of foam eartips, 2 pairs of triple-flange silicone eartips, and 2 pairs of single-flange silicone eartips. Also includes snap-shut travel case..
  • ☑️ CERTIFIED HEARING PROTECTION: ISOtunes Wired hearing protection headphones are ANSI-certified and OSHA-compliant with a 29 dB Noise Reduction Rating (NRR) and ISOtunes 82 dB SafeMax Technology..
Check Stock

Sunex Tools 1874 1/4' Drive Master Fractional and Metric Impact Sockets Set

  • CR-MO STEEL: Provides the strength and flexibility to handle high torque impact tools..
  • RADIUS CORNER DESIGN: Reduces wear and increases torque on fasteners by placing force on fastener walls rather than fastener corners..
  • CHAMFERED OPENING: Quickly aligns fastener to socket..
  • DUAL SIZE MARKINGS: Laser etched and roll stamped markings to ensure permanent socket identification..
  • HEAVY DUTY STORAGE CASE: Convenient impact socket transport and storage..
  • MEETS ANSI STANDARDS: All sockets are rigorously tested, ensuring peak performance and durability..
  • SAE: 3/16” to 9/16” and METRIC: 4mm to 15mm.
  • FULL COMPLEMENT OF EXTENSIONS: Provides access to virtually all recessed fasteners..
  • UNIVERSAL JOINT: Adapts any socket for use in swivel applications..
Check Stock