Top Ansi Nail Fastener Reviews

GEARWRENCH 12 Pc. 12 Point XL GearBox Double Box Ratcheting Metric Wrench Set - 85988

  • XL GearBox design has a longer beam to increase leverage and torque.
  • Bright, full polish chrome finish for rust prevention and easy cleaning, oil and dirt wipes right off.
  • 0° offset and slim profile to access the tightest spaces and recessed fasteners.
  • Off-corner loading design on box end for better grip and reduced fastener rounding.
  • Ratcheting box end needs as little as 5° to move fastener as opposed to 30°.
  • Standard box end combined with the long pattern length gives this wrench excellent torque capabilities to break a stubborn fastener.
  • Long bolts and threaded rods are not a problem, the ratcheting head allows the wrench to travel the length of the threads without removing the box end from the fastener.
  • Wrenches come with a blow molded tray that keeps tools organized and can be hung on a wall or kept in your tool box or roll-away cabinet.
  • Extremely strong, GEARWRENCH meets or exceeds ANSI, ASME, DIN, and federal torque specifications.
Check Stock

1/2 Inch Drive x 35 mm 6-Point Impact Socket

  • Size is marked both with a high-visibility laser marking and a permanent stamped marking that won't wear off.
  • 6-point socket opening provides an exact fit for hex fasteners.
  • Radiused corners prevent fastener round-off by applying force to a fastener's flat sides, rather than its corners.
  • Meets a minimum of 1.3 times the ANSI/ASME standard for proof torque.
Check Stock

TEKTON 1/2 Inch Drive x 33 mm Deep 6-Point Impact Socket | SID23133

  • Size is marked both with a high-visibility laser marking and a permanent stamped marking that won't wear off.
  • 6-point socket opening provides an exact fit for hex fasteners.
  • Radiused corners prevent fastener round-off by applying force to a fastener's flat sides, rather than its corners.
  • Meets a minimum of 1.3 times the ANSI/ASME standard for proof torque.
Check Stock

TEKTON 1/2 Inch Drive x 36 mm Deep 6-Point Impact Socket | SID23136

  • Size is marked both with a high-visibility laser marking and a permanent stamped marking that won't wear off.
  • 6-point socket opening provides an exact fit for hex fasteners.
  • Radiused corners prevent fastener round-off by applying force to a fastener's flat sides, rather than its corners.
  • Meets a minimum of 1.3 times the ANSI/ASME standard for proof torque.
Check Stock

Sunex 224XD, 1/2 Inch Drive, 3/4 Inch Extra Long Deep, Impact Socket, Cr-Mo Alloy Steel, Radius Corner Design, Dual Size Markings

  • - EXTRA LONG DEEP: Provides more reach to the nut and engine studs, making it useful for cable tension applications..
  • - CR-MO STEEL: Provides the strength and flexibility to handle high torque impact tools..
  • - RADIUS CORNER DESIGN: Reduces wear and increases torque on fasteners by placing force on fastener walls rather than fastener corners..
  • - CHAMFERED OPENING: Quickly aligns fastener to socket..
  • - DUAL SIZE MARKINGS: Laser etched and roll stamped markings to ensure permanent socket identification..
  • - MEETS ANSI STANDARDS: All sockets are rigorously tested, ensuring peak performance and durability..
Check Stock

Sunex 1818, 1/4 Inch Drive Master Magnetic Socket Set, 23-Piece, SAE/Metric, 3/16' - 1/2', 5mm-15mm, Cr-Mo Steel, Heavy Duty Storage Case, Includes Universal Joint & 2” Extension

  • MAGNET: Better keeps the fastener in the socket..
  • CR-MO STEEL: Provides the strength and flexibility to handle high torque impact tools..
  • RADIUS CORNER DESIGN: Reduces wear and increases torque on fasteners by placing force on fastener walls rather than fastener corners..
  • CHAMFERED OPENING: Quickly aligns fastener to socket..
  • DUAL SIZE MARKINGS: Laser etched and roll stamped markings to ensure permanent socket identification..
  • HEAVY DUTY STORAGE CASE: Convenient impact socket transport and storage..
  • MEETS ANSI STANDARDS: All sockets are rigorously tested, ensuring peak performance and durability..
  • SAE: 3/16” to ½” & METRIC: 5mm to 15mm.
  • 2” EXTENSION: Provides access to recessed fasteners..
  • UNIVERSAL JOINT: Adapts any socket for use in swivel applications..
Check Stock

Superior Parts SP 885-827A Aluminum Magazine for Hitachi NR83A & NR83A2 Framing Nailers

  • Fastener Type: full round head, plastic strip collation, shoots 3-1/2" Nails.
  • Fastener length capacity: 2" To 3-1/2", nose guard included.
  • Fastener diameter range: 0. 113" To 0. 148”, installed nail FEEDER and ribbon spring.
  • Magazine angle: 21 degrees, available as assembly only.
  • Magazine capacity: 70, comes in blister packaging, MAGAZINE loading: top.
Check Stock

Air Locker AL83V3 3-1/4 Inch Full Round Head Coil Framing Nailer

  • Side load pop-out magazine for fast and easy reloads | Cylinder valve drive system for rapid response and increased durability.
  • Tool-less depth or drive adjustment for ­flush fastening in varying materials | Open nose design for easy extraction of a jammed nail | Ergonomic non-slip rubber grip on handle helps maintain a secure hold and comfort during use.
  • Specification: | Nail Capacity: 225-300 | Fastener Length: 2" - 3-1/4" | Fastener Diameter: 0.099" - 0.131" | Magazine Angle: 16° +/- 1° | Collation: Wire | Operating Pressure: 70-120 PSI | Firing Mode: Contact Actuation Trigger.
  • Applications: | Wall sheathing | Roof decking | Subflooring.
  • Mobile and modular home construction | Making of wooden boxes | Pallets and drums | Packing operations.
Check Stock

TEKTON 1/2 Inch Drive x 34 mm 6-Point Impact Socket | SID22134

  • Size is marked both with a high-visibility laser marking and a permanent stamped marking that won't wear off.
  • 6-point socket opening provides an exact fit for hex fasteners.
  • Radiused corners prevent fastener round-off by applying force to a fastener's flat sides, rather than its corners.
  • Meets a minimum of 1.3 times the ANSI/ASME standard for proof torque.
Check Stock

Sunex 9707MA Jumbo Metric Combination Wrench Set, 7Piece (Includes Roll-Case) CRV

  • RADIUS CORNERS: Grip the flat sides of the fastener head instead of the corner to prevent round-off..
  • RAISED PANEL DESIGN: Reduces the weight of the tool while maintaining overall strength..
  • CHROME PLATING: For strength and the prevention of rust, corrosion and deformation..
  • EASY IDENTIFICATION: Sizes stamped on both sides for fast and easy identification..
  • ANSI STANDARDS: Heat treated and tempered to meet or exceed ANSI Standards for strength..
Check Stock

TEKTON 1/2 Inch Drive x 34 mm Deep 6-Point Impact Socket | SID23134

  • Size is marked both with a high-visibility laser marking and a permanent stamped marking that won't wear off.
  • 6-point socket opening provides an exact fit for hex fasteners.
  • Radiused corners prevent fastener round-off by applying force to a fastener's flat sides, rather than its corners.
  • Meets a minimum of 1.3 times the ANSI/ASME standard for proof torque.
Check Stock

TEKTON 1/2 Inch Drive x 19 mm Deep 12-Point Impact Socket | SID23319

  • Size is marked both with a high-visibility laser marking and a permanent stamped marking that won't wear off.
  • 12-point socket opening provides an exact fit for 12-point fasteners.
  • Radiused corners prevent fastener round-off by applying force to a fastener's flat sides, rather than its corners.
  • Meets a minimum of 1.3 times the ANSI/ASME standard for proof torque.
Check Stock

RIMKOLO 107-Piece Bit Socket Set,1/4

  • DURABLE S2 Material: The bit socket is made of S2 alloy steel, which is strong and has good toughness, not easy to break.The chamfering design of the head increases the contact area, not easy to wear,more durable..
  • HEAT TREATMENT CR-V: The socket base is made of chrome vanadium steel with stronger hardness after heat treated and provides higher torque.The surface is mirror chrome plated,and the E-Torx Sockets with manganese phosphate coating are more anti-corrosive and anti-rust than Black oxide coating, extending the service life..
  • CHAMFERING DESIGN: Each bits head has a unique chamfering design, which makes it easier to insert the bit head into the fastener. And increase the contact area with the fastener, reduce wear, protect the fastener.Complies with ANSI standards..
  • COMPLETE ACCESSORIES: 107PCS high quality bit socket set,including 1/4", 3/8" and 1/2"drive Torx / extra long Torx / tamper proof Torx/hex / ball end hex SAE & metric bit set. Complete accessories to meet your needs..
  • EASY TO IDENTIFYWith a storage toolbox, easy to carry. Specifications are clearly printed on the tool box and socket, which is convenient for identification and sorting, saving you time..
Check Stock