Top Anodized Oil Filter Adapter Reviews

Engine Oil Cooler and Filter Housing Adapter Kit - Replaces 68105583AF, 68105583AE - Compatible with Chrysler, Dodge & Jeep 3.6L V6 Vehicles - 200, Town & Country, Grand Caravan, Wrangler, Ram

  • Replacement Engine Oil Cooler & Filter Housing Adapter Kit - With Intake Manifold Plenum Gasket Set - Keeps the engine oil clean as it circulates through the engine. This replacement Oil Filter Housing Adapter Kit also comes with a new oil filter pre-installed for a complete and worry free installation. If you are experiencing oil leaks above the transmission or near the cooler housing where the oil filter is then you may have a problem with your oil filter housing adapter..
  • Compatible Replacement for Dodge, Chrysler & Jeep Vehicles With 3.6L Pentastar V6 Engine - 2014 - 2017 200 | 2014 - 2017 300 | 2014 - 2016 Town & Country | 2014 Avenger | 2014 - 2017 Challenger | 2014 - 2017 Charger | 2014 - 2015 Durango | 2014 - 2016 Grand Caravan | 2014 - 2016 Cherokee 3.2L | 2014 - 2015 Grand Cherokee | 2014 - 2017 Ram 1500 | & more. See below for full vehicle list..
  • Replaces Part# 68105583AF, 68105583AE, 68105583AA, 68105583AB, 68105583AC, 68105583AD usually found on popular , Journey, Wrangler, Ram Promaster 1500, 2500, 3500 including year models 14, 15, 16, 17. The oil filter housing can easily be located above the engine and can be accessed by removing the intake manifold. It is best and practical to replace the whole housing rather than waste time....
Check Stock

TOYOTA Genuine OEM 00279-0WQTE-01 Oil (4 QUARTS)

  • STRONG AND DURABLE: This oil filter wrench is made of high-quality aluminum alloy, ensuring strength and durability. The surface of the oil filter cap removal tool is treated with a high quality black anodized finish, anti-rust and anti-corrosion to prolong the service life of the tool..
  • APPLICATION: Install the 64mm 14 flute cup style oil filter wrench on the filter cover, it can clamp and provide maximum torque with multiple contact points to rotate the extremely tight oil filter cover, and cooperate with a 27mm socket or 3/8” (10mm)drive ratchet wrench to loosen it..
  • APPLICABLE MODELS: Oil filter cover removal tool is suitable for most car models, such as Toyota, Lexus, RAV4, Camry, Tundra, Highlander, Sienna and More vehicles equipped with 2.5L to 5.7L engine that that use Toyota's cartridge style oil filter system. But the filter wrench does not fit the car with disposable conventional spin-on filters and 1.8L engine oil filter cap..
  • DESIGN: The bottom edge of the oil filter wrench has 4 slots for a perfect match with the vehicles using 15620-31060, 15620-36010, 15620-36020 oil filter housing covers. The tooth-like s....
Check Stock

GlowShift Oil Filter Sandwich Plate Thread Adapter - 20mm x 1.5 Thread - Install up to (4) 1/8-27 NPT Oil Pressure & Temperature Sensors - Includes O-Ring & Port Plugs

  • GlowShift Oil Filter Sandwich Adapter Allows Users to Install (4) 1/8-27 NPT Oil Pressure and/or Oil Temperature Sensors to the Oil Filter of Your Vehicle - Installs Between the Engine Block & Oil Filter.
  • Features (1) Aluminum Sandwich Plate Adapter with (4) 1/8-27 NPT Female Thread Ports, (1) M20 x 1.5 Thread, (4) 1/8-27 NPT Flush Mount Port Plugs & (1) O-Ring for a Leak-Free Seal.
  • Note: This Oil Filter Adapter is Only Compatible if the Gasket Diameter of Your Oil Filter is 3" or Less.
  • Includes Step-By-Step Installation Instructions.
  • GlowShift Guarantee with One Year Limited Warranty & Free Lifetime Technical Support.
Check Stock

Motivx Tools MX2325-US 88.5mm / 90mm 15 Flute Precision CNC Machined Oil Filter Wrench Compatible with Land Rover and Jaguar 3.0L and 5.0L Gas Engines

  • This 88.5mm / 90mm 15 flute oil filter wrench is compatible with 2010 and newer Jaguar and Land Rover 3.0L and 5.0L engines equipped with plastic oil filter caps which must be removed to expose the filter element..
  • This oil filter wrench is proudly made in the USA. It is precision CNC machined from solid aluminum and includes a manufacturers lifetime warranty..
  • The main body of the wrench is made from 6061-T6 aluminum and anodized grey while the drive hub is made from 7075-T6 aircraft aluminum for ultimate strength and anodized red for better visibility..
  • The wrench can be operated with a 3/8” drive ratchet or extension, or a 24mm socket..
Check Stock

AUPREX Oil Filter Wrench 64mm 14 Flute Oil Filter Removal Tool for Toyota,Lexus,Camry,Tundra,Highlander, RAV4, 4 Runner, Scion and Other 2.0L-5.7L Engines with Cartridge Style Oil Filter Housing

  • APPLICATIONS: This oil filter wrench is compatible with Toyota, Lexus, RAV4, Camry, Tundra, Highlander, Sienna and other vehicles equipped with 2.5L to 5.7L engines that use Toyota's cartridge style oil filter system. But it is not working on vehicles with disposable traditional spin-on canister filers and the 1.8L engines..
  • HIGH QUALITY MATERIAL: This Toyota oil filter wrench is made of high quality 6061 aluminum alloy which provides a great strength to unscrew without any damages or flex on it. The surface of this oil filter is treated with high quality black anodized finish to prevent corrosion..
  • REASONABLE DESIGN: The 64mm 14 flute oil filter wrench is with 4 teeth on the bottom edge to perfectly match the tabs on Toyota style oil filter housing which can efficiently prevent the slippage while unscrewing the oil filter housing..
  • INSTRUCTIONS: The oil filter wrench can be applied to a 27mm socket or 3/8” drive ratchet wrench to install or remove the oil filter. Simply match the wrench on the oil filter cap and unscrew with a socket or ratchet wrench..
  • EASY TO TAKE THE WRENCH OFF: Compare to some oil filter wrenches which are usually stuck on the cap, AUPREX oil filter wrench is easy to release from the oil filter housing..
Check Stock

Motivx Tools MX2326-US 86.6mm 16 Flute Precision CNC Machined Aluminum Oil Filter Wrench Compatible with Most BMW and Volvo Engines with 86mm Cartridge Style Oil Filter Caps

  • This 86.6mm 16 flute oil filter wrench is compatible with BMW and Volvo engines that have a smooth top oil filter cap. It will not fit caps with a 6 point nut on top. Not recommended for 2014 and newer Volvo 2.0 liter 4 cylinder turbo engines..
  • This oil filter wrench is proudly made in the USA. It is precision CNC machined from solid aluminum and includes a manufacturers lifetime warranty..
  • The main body of the wrench is made from 6061-T6 aluminum and anodized grey while the drive hub is made from 7075-T6 aircraft aluminum for ultimate strength and anodized red for better visibility..
  • The wrench can be operated with a 3/8” drive ratchet or extension, or a 24mm socket..
Check Stock

JDMON Universal Adjustable 3 Jaw Oil Filter Wrench Remover Tool for Removing Oil filters Range 2.4 inch from 3.8 inch in Diameter Include 1/2”-3/8” and 1/4”-3/8” Drive Adapter

  • Adjustable Fit: The oil filter wrench can remove the oil filter from 2-1/4 inch to 3.8 inch(60mm-95mm) ,fit 1/4 & 1/2 inch square driver ratchet or 3/8 inch wrench which can remove various models of vehicles..
  • High Hardness Material: The oil filter wrench is made of carbon steel which is much stronger than normal material and more durable and handy to remove oil filter.
  • 3 Jaw Design: The tool is designed 3 jaw anti-drop design with firm hold on filter, helping users remove filters quickly, with less slip and without hassle. Claws fit tighter as more torque is applied..
  • Compact Design: This oil filter remover provides a low clearance, helping users dislodge filters even in tight spaces..
  • Added 2 Drive Adapter : Not only the oil filter wrench, but also 2 pcs Drive Adapter are included in box to provide the extra Drive for your oil filter.
Check Stock

Filter Adapter Kiwifotos Lens Ring Adapter for Nikon Coolpix B700 P600 P610 P610S Fit for Any 62mm Threaded Filter or 62mm Lens Cap

  • Compatibility: Kiwifotos filter adapter is fit for Nikon Coolpix B700, P600, P610, P610S. It is designed for any 62mm threaded filter or 62mm lens cap.
  • Function: It adopts a screw design for adding desirable filter to achieve improved image quality or various effects of pictures.
  • Protection: With the lens adapter ring attached, your lens also gets the extra protection from accidental impact or scratch.
  • Material: The ring adapter is made of premium, durable and lightweight black anodized aluminum.
  • Warranty: 1-year 100% Satisfaction Guarantee.
Check Stock

Engine Oil Cooler Filter Housing Kit with Gaskets, Cap & Seals - Replaces 55566784, 88179-91400 - Compatible with Buick & Chevy 1.4L Vehicles - Encore, Cruze, Cruze Limited, Sonic, Trax

  • Replacement Engine Oil Cooler & Filter Housing Assembly - With Gaskets, Cap & ACM Seals - Keeps the engine oil clean and cool as it circulates through the engine. This replacement Oil Filter Housing Adapter Kit also comes with a new oil filter pre-installed for a complete and worry free installation. If you are experiencing oil leaks above the transmission or near the cooler housing where the oil filter is then you may have a problem with your oil cooler and filter housing..
  • Compatible Replacement for Buick & Chevrolet Vehicles with 1.4L L4 Engine - 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021 Encore | 2011-2015 Cruze | 2016 Cruze Limited | 2012-2018 Sonic | 2013-2021 Trax |. The oil filter housing can easily be located above the engine and can be accessed by removing the intake manifold..
  • Replaces Part# 55566784, 918-428, 650039, 88179-91400, 55593189, 55594651, 55565385, 55565388 usually found on popular Encore, Cruze, Cruze Limited, Sonic Trax including year models 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21. It is best and practical to replace the whole housing rather than waste time trying to find where the leak is as it can be from the cracks on the housing or seals..
  • OEM Fit, Quality, Finish - While this is not a genuine OEM....
Check Stock

Oil Filter Cap Removal Tool Aluminum Cup Wrench 64mm 14 Flute for Toyota Lexus Scion 2.5L to 5.7L Engines with Cartridge Style Oil Filter Housings Fits Camry, RAV4, Highlander, Sienna, Tundra and More

  • This aluminum cup wrench is a perfect removal tool for Toyota, Lexus, and Scion vehicles equipped with 2.5L to 5.7L engines that use Toyota's cartridge-style engine oil filter housing, while it does not fit the 1.8L engine or vehicles that use disposable spin-on style oil filters.
  • This extended life oil filter wrench is forged from high quality 6061 T5 aluminum, which can bear tremendous pressure when you unscrew the extremely tight Toyota oil filter caps.
  • The surface of this oil filter wrench is treated with high quality black anodized finish to prevent corrosion.
  • There are 4 slots on the bottom edge, which are mated perfectly with the tabs on the Toyota 15620-31060 oil filter cover and helps prevent slippage when you unscrew the oil filter housing with tremendous strength by a socket wrench or adjustable spanner.
  • What you will get are 1 metal cup wrench for removing oil filter and 100% satisfaction customer care.
Check Stock

THIKPO 3/8 inch 64mm 14 Flute Oil Filter Wrench for 2.5-5.7L Engines with Toyota's Cartridge Style Oil Filter System, Oil Filter Cap Removal Socket Tool for Toyota, Lexus, Scion

  • This 3/8" 64mm 14 flute Toyota oil filter cap removal tool is made of premimum 6065 aluminum alloy, which make it tough enough to provide great power to rotate and replace the extremely tight original oil filter cap..
  • Surface of the oil filter wrench is treated with a high quality black anodized finish to prevent corrosion. It greatly increases friction and durability of the tool, and will highly extend the serves life..
  • This THIKPO oil filter wrench is used for vehicles that use 15620-31060, 15620-36010, 15620-36020 oil filter housing cap and 04152-YZZA1, 04152-YZZA4, and 04152-YZZA5 Toyota oil filter system, including the new 2GRFKS 3.5L Tacoma and 8AR-FTS 2.0L in the NX200t and RC200t..
  • The oil filter cap removal tool perfect fit most of vehicles equipped with 2.5L to 5.7L engines, such as Toyota, Lexus , Scion RAV4, Camry, Tundra, Highlander, Sienna, 4Runner, Avalon, Tacoma, IS250, RX350and others which use Toyota's cartridge style oil filter system..
  • WARRANTY from THIKPO - This is NOT a genuine part, it's a aftermarket replacement part. Please feel free to contact us if you have any questions about our products or serves, we will try the best to help you..
Check Stock

NICECNC Oil Filter Cover With Observing Window Compatible with Yamaha Raptor 700 2006-2021 700R 2009 2011-2021 Replacement for 1S3-13447-00-00 Black

  • ★ Compatible with Yamaha Raptor 700R YFM700RW YFM700RSL YFM700RSE YFM700R SE Raptor 700 YFM700RSE YFM700R YFM700..
  • ★ It can help you to see the engine oil filter clearly, know how it works and find out if the filter and oil are contaminated..
  • ★ CNC-machined from strong but lightweight 6061-T6 aluminium for a perfect fit to replace your stock oil filter cover..
  • ★ Anodized finishing for corrosion resistance and to give your bike that factory look..
  • ★ Comes with a seal, prevent oil leakage..
Check Stock

WEILEITE 3.6 Engine Oil Cooler Filter Housing

  • *NEW UPGRADED QUALITY & Improved Manufacturing. Products made in better raw material, Seal upgrade, New Fluororubber gaskets are more durable and prevent leaks better. Make the engine oil cooler have a longer service life..
  • A good oil cooler filter adapter will help prevent oil leaking, keep the engine room working at the normal oil temperature and oil pressure, make you have a safe and pleasant journey..
  • This Engine Oil Cooler Filter is Compatible with 2013 Ram 1500 6 Cyl 3.6L.
  • 2012 2012 2013 Ram C/V 6 Cyl 3.6L. Adapter-Engine Oil Filter, OE No. 5184294AE.
  • Replacement for 2011 2012 2013 Chrysler 200,300,Town & Country.
  • Dodge Avenger,Challenger,Charger,Durango,Grand Caravan,Journey.
  • Jeep Grand Cherokee,Wrangler 6 Cyl 3.6L..
  • Any questions please contact us, we are always here to provide professional help! ***All products are produced according to standard specifications and have been quality-verified before leaving the factory. Some customers think that the size of the product is not suitable, it may be that your model is a little different, and you can use it with simple modifications..
Check Stock