Top Angular Bearing Reviews

MOCHU 725 725C/P5 5x16x5 Angular Contact Ball Bearing, ABEC-5, 15° Contact Angle, Metric, 5mm ID, 16mm OD, 5mm Width, Single Row, Open

  • Double-row angular contact ball bearing, supporting moderate combined radial and bidirectional thrust loads.
  • Ball contact angle of 20 degrees relative to the inner and outer raceways increases thrust load capacity.
  • Rubber seals on both sides of the bearing to keep lubricant in and contaminants out.
  • Pressed steel cage evenly spaces balls for reduced friction, vibration, and noise.
  • Normal axial internal clearance for applications where thermal expansion is not a factor.
Check Stock

Enduro ABEC-5 Angular Contact Bearing, 71903 17X30X7-71903 LLB

  • Single-row angular contact ball bearing, supporting moderate to heavy one-directional thrust loads, and combined loads where thrust load is predominant.
  • Ball contact angle of 40 degrees relative to the inner and outer raceways increases thrust load capacity.
  • Open configuration for lubrication applied in place.
  • Brass cage evenly spaces balls for reduced friction, vibration, and noise.
  • ABEC 1 tolerance ratings for accuracy and low rotational speeds.
Check Stock

uxcell 3204-2RS Angular Contact Ball Bearing 20x47x20.6mm Sealed Bearings 5204-2RS

  • Low maintenance design for Problem free operation.
  • Angular bearing contact allows for outstanding durability while supporting both Radial and axial loads.
  • Available in wide variety of types, designs, sizes, and materials.
  • Quality you can Count on. SKF has been making ball bearings for over 100 years.
Check Stock

SUNEX 66037 3.5T FLOOR JACK STEEL RAPID RISE

  • Rapid Rise Technology with dual pump pistons raises the saddle to maximum height in only six pump strokes..
  • Overload and bypass safety valves prevent the jack from being used beyond its rated capacity and over extension of the ram..
  • Strong chassis with upper and lower frame flanges to withstand twisting..
  • Wide front wheels and ball bearing mounted rear caster wheels for stability and easy maneuverability..
  • Angular positioned pump pistons provide maximum effective pump stroke when jack is completely under a vehicle..
Check Stock

RBC SAA10AG0 Thin Section Ball Bearing, 440C Stainless Steel, Unsealed, Angular A-Type, 1\ Bore x 1.375\ OD x 0.25\ Width

Check Stock

uxcell PHSB8 Rod End Bearing 1/2-inch Bore Pre-Lubricated Bearing 1/2-20 Female Thread Right Hand

  • Type: 1/2" Hole x 1/2-20 right-hand female thread rod end. Maximum angular misalignment: 9 Degree..
  • Material: The #45 steel spherical rod end body and hardened bearing steel ball joint ensure long service life..
  • Capacity: 19KN Static Load Capacity, 15KN Dynamic Load Capacity..
  • Features: Large load rating, low noise, anti-corrosion, tough, and durable..
  • Application: Widely used in engineering hydraulic cylinders, forging machine tools, automation equipment, and so on..
Check Stock

uxcell POSB8 Rod End Bearing 1/2-inch Bore Pre-Lubricated Bearing 1/2-20 Male Thread Right Hand

  • Type: 1/2" Bore x 1/2-20 right-hand male thread rod end. Maximum angular misalignment: 9 Degree..
  • Material: The #45 steel spherical rod end body and hardened bearing steel ball joint ensures long service life..
  • Capacity: 19KN Static Load Capacity, 15KN Dynamic Load Capacity..
  • Features: Large load rating, low noise, anti-corrosion, tough, and durable..
  • Application: Widely used in engineering hydraulic cylinders, forging machine tools, automation equipment, and so on..
Check Stock

uxcell PHSB6 Rod End Bearing 3/8-inch Bore Pre-Lubricated Bearing 3/8-24 Female Thread Right Hand

  • Type: 3/8" Bore x 3/8-24 right-hand female thread rod end. Maximum angular misalignment: 9 Degree..
  • Material: The #45 steel spherical rod end body and hardened bearing steel ball joint ensures long service life..
  • Capacity: 10KN Static Load Capacity, 9.4KN Dynamic Load Capacity..
  • Features: Large load rating, low noise, anti-corrosion, tough, and durable..
  • Application: Widely used in engineering hydraulic cylinders, forging machine tools, automation equipment, and so on..
Check Stock

uxcell PHSB6 Rod End Bearings 3/8-inch Bore Pre-Lubricated Bearings 3/8-24 Female Thread Right Hand 2pcs

  • Type: 3/8" Bore x 3/8-24 right-hand female thread rod end. Maximum angular misalignment: 9 Degree..
  • Material: The #45 steel spherical rod end body and hardened bearing steel ball joint ensures long service life..
  • Capacity: 10KN Static Load Capacity, 9.4KN Dynamic Load Capacity..
  • Features: Large load rating, low noise, anti-corrosion, tough, and durable..
  • Application: Widely used in engineering hydraulic cylinders, forging machine tools, automation equipment, and so on..
Check Stock

uxcell PHSB6 Rod End Bearings 3/8-inch Bore Pre-Lubricated Bearings 3/8-24 Female Thread Left Hand 2pcs

  • Type: 3/8" Bore x 3/8-24 left-hand female thread rod end. Maximum angular misalignment: 9 Degree..
  • Material: The #45 steel spherical rod end body and hardened bearing steel ball joint ensures long service life..
  • Capacity: 10KN Static Load Capacity, 9.4KN Dynamic Load Capacity..
  • Features: Large load rating, low noise, anti-corrosion, tough, and durable..
  • Application: Widely used in engineering hydraulic cylinders, forging machine tools, automation equipment, and so on..
Check Stock

uxcell POSB4 Rod End Bearings 1/4-inch Bore Pre-Lubricated Bearings 1/4-28 Male Thread Right Hand 2pcs

  • Type: 1/4" Bore x 1/4-28 right-hand male thread rod end. Maximum angular misalignment: 13 Degree..
  • Material: The #45 steel spherical rod end body and hardened bearing steel ball joint ensures long service life..
  • Capacity: 6.6KN Static Load Capacity, 4.5KN Dynamic Load Capacity..
  • Features: Large load rating, low noise, anti-corrosion, tough, and durable..
  • Application: Widely used in engineering hydraulic cylinders, forging machine tools, automation equipment, and so on..
Check Stock

140H Coupling Rubber Assy for Excavator Doosan DH300 CAT E330B Komatsu PC300

  • The shaft couplings are mechanical component that connect the drive shaft and driven shaft of a motor, etc., in order to transmit power..
  • Shaft couplings introduce mechanical flexibility, providing tolerance for shaft misalignment. As a result, this coupling flexibility can reduce uneven wear on the bearing, equipment vibration, and other mechanical troubles due to misalignment..
  • The size is complete and the surface is smooth, convenient for use. The flexible connection design can absorb vibration and compensate for radial, angular and axial misalignment..
  • This shaft coupling features simple structure and compact size, it is convenient for installation..
  • It is commonly used to connect 3D printer, actuating motors, stepping motors, encoders, machine tool, etc..
Check Stock

Heyiarbeit 8mmx10mm Clamp Tight Motor Shaft 2 Diaphragm Flexible Coupling

  • [Technical Parameter] Shaft Usage: 8 mm / 0.31" to 10 mm / 0.39".
  • Total Size: 45mm x 34mm / 1.77" x 1.34" (LxD).
  • [High Quality] Made of high strength aluminum alloy, excellent bearing capacity, long service life.
  • Need no lubrication, convenient and quiet to use.
  • [Feature] Stable and reliable performance, with good vibration damping, buffering and electrical insulation performance.
  • [Application] Widely used in shafting transmission of various mechanical devices, such as pumps, fans, compressors, hydraulic machinery, petroleum machinery, printing machinery, textile machinery, chemical machinery, mining machinery, metallurgical machinery, aviation (helicopter), ship high-speed power transmission system, steam turbine, piston power mechanical transmission, etc.
Check Stock