Top Angle Measurement Gauge Reviews

Angle Gauge Drill Bits, 3Pcs S/S Angle Gauge Measurement Drill Sharpener Tool Set Including Drill Diameter, Drill Bits and General Angle Gauge with Case

Professional Measurement Tool: This is a practical set of angle gauge set in drill bits angle measuring and drill sharpener inspection.
Professional and Standard Parameters: 60 Degree cutting tool for the inspection of tooth‑shaped 55 degree angle and metric thread and inch thread, and also it can measure blade angles.
Comprehensive Angle Range: This set of drill bits gauge has a comprehensive angle range: 60 °, 70 °, 90 °, 110 °, 118 °, 125 °, 135 °, 150 ° and 160 °.
Suitable Utilization: Diameter drill front edge of the protractor 50 gauge 118 ° angle twist drills grinding gauge is suitable for 118 ° diameter of less than 50mm grinding twist drills.
Durable for Long-Time Use: Made of high quality stainless steel, this set of angle gauge has high hardness, and it is durable for long-time use.

Check Stock

Stair Tread Template Tool, Stainless Stair Tread Gauge Tool Shelf Stair Jig Layout Tool Box, Measuring Gauge Range 10.2in to 53.3in, Suitable for Complex Stair Treads by AnoleX

...mplate tool provides the greatest help when you install the stairs, it can measure the length and width of the stair treads, and it can also measure the rotation angle of the spiral staircase. In addition, this stair gauge can also be used for deck floors, wall frames, window sills, shelves, closets, partitions for measurement and angle placement..
【Flexible Use】Stair tread gauge tool with three sizes of 8&12&16 inches extension rod, can slide and adjust in the range of 10.2 to 53.3 inches. The 10 inch stainless steel plates on both sides with scale and angle measurement (0° to 360°) can be combined and stretched arbitrarily according to your needs to meet the measurement of different corners. The stair ruler is easily adjusted and securely locked in place with four knobs..
【Sturdy Material】The stair measurement tool is made of 304 stainless steel scale plate and is covered with chemical-resistant environmentally friendly coating materials, which can effectively prevent moisture or rust, and it will not wear for a long time, and it is strong and durable..
【Precise and clear scale】The clear radium engraving on the surface of the stair tread and shelf gauge will not fade after long-term use. All scales are strictly inspected and calibrated b....

Check Stock

Woodworking Marking Gauge Mortise Gauge Ruler Double Head Aluminium Alloy Carpenter Tool Mortise Gauge Scriber Ruler

【Anti‑Slip】The marking gauge tool has anti‑slip teeth, and it is anti‑slip hands, beautiful and comfortable, easy to use.
【Material】The wood marking gauge main body is made of aluminum alloy with rounded corners, which makes it easy to grasp.
【High Efficiency】The mortise gauge scriber ruler is very simple to use, good performance and high efficiency. Accurate marking, a good helper for woodworkers.
【Clear Angle】Acrylic solid acrylic shock‑proof level bubble, the inner wall automatically prints 2 types bubbles (measure the level, measure the 45° angle), the horizontal direction is clear at a glance, fine workmanship, practical.
【Reliable Measurement】The woodworking mortise ruler fits the steel ruler scale used in daily use, 145mm effective scale, reliable measurement.

Check Stock

Proster 200mm 360°Angle Finder Data Hold LCD Angle Ruler One Key Zeroing 80mm 3 1/8\ Magnetic Height Gauge Depth Gauge for Woodworking Construction Home Decoration

【Accurate Angle Finder】200mm stainless steel ruler to measure length (metric and imperial), 360°angle sensor for relative and absolute angle measurement inside and outside, Range:0-360°,Resolution：0.05°,Accuracy：±0.3°,Repeatability：0.05°..
【One-key Data Hold & Zero Reseting】Knob locked one-key data hold function for both angle/depth gauge to hold the angles/depth measured at any time.
Zeroing reset button at any angle for relative measuring..
【Multi-function Magnetic Height Gauge】3-In-1 Height/Depth/Thickness Gauge,easy to measure bore/slot depths with plunger, one key mm/inch/fraction switch, range: 80mm, resolution: 0.05mm, accuracy: 0.10mm for routers horizontal/vertical measure with self standing magnetic feet..
【LCD Display & Stainless Steel】Sturdy plastic thickness gauge for with quick-reading digital LCD display, harden stainless steel angle finder ruler and depth ruler provides lifelong service..
【Wide Applicatoion】This angle finder with magnetic height depth thickness gauge is especially designed for Woodworking, Construction, Home Decoration, Table saws, Hand Routers, Etc..

Check Stock

Digital Angle Finder Protractor 0-360 Degree T-Bevel Gauge & Protractor with Horizontal Vertical Bubble & Full LCD Display for Woodworking, Metalworking, Construction

High Accuracy：This digital angle finder allows a full range 0-360°to measure internal angle，external angle & Contra angle Measuring precision is ±0.5°, resolution is 0.05° .You can switch between degrees and minutes to Improve the measurement accuracy , meet your requirements for different accuracy..
Four Large Control Buttons: Pressing hold button on the digital angle finder to hold the measurement at any angle, it helps the users effectively record the angle values. In addition, including power on/off, read reverse angle, flip display, and clear readout..
Digital Sliding T-bevel: Turn the center knob to lock the angle, and use the protractor to copy any angle from 0 to 360 degrees, In addition, easily get 45 degree angle with a T bevel gauge..
LCD Display & Bubble Level: This highly protractor tool is equipped with a large LCD display for easy reading and integrates a steel locking knob for adjustment. There is a perfectly positioned bubble level on the end of the digital angle finder body to ensure the level before tracing any angles and making any cuts..
Worry Free Customer Service: We back each T bevel gauge with a free 1 year exchange service plus lifetime technology support, giving you complete peace of mind. Please don’t....

Check Stock

Digital Angle Finder Protractor 0-360 Degree T-Bevel Gauge & Protractor with Horizontal Vertical Bubble & Full LCD Display for Woodworking Metalworking Construction

High Accuracy：This digital angle finder allows a full range 0-360°to measure internal angle，external angle & Contra angle Measuring precision is ±0.5°, resolution is 0.05° .You can switch between degrees and minutes to Improve the measurement accuracy , meet your requirements for different accuracy..
Four Large Control Buttons: Pressing hold button on the digital angle finder to hold the measurement at any angle, it helps the users effectively record the angle values. In addition, including power on/off, read reverse angle, flip display, and clear readout..
Digital Sliding T-bevel: Turn the center knob to lock the angle, and use the protractor to copy any angle from 0 to 360 degrees, In addition, easily get 45 degree angle with a T bevel gauge..
LCD Display & Bubble Level: This highly protractor tool is equipped with a large LCD display for easy reading and integrates a steel locking knob for adjustment. There is a perfectly positioned bubble level on the end of the digital angle finder body to ensure the level before tracing any angles and making any cuts..
Worry Free Customer Service: We back each T bevel gauge with a free 1 year exchange service plus lifetime technology support, giving you complete peace of mind. Please don’t hesitat....

Check Stock

GemRed Digital Level and Protractor, 2 in 1 Digital Angle Finder LCD Display, 10inch/270mm/360°Angle Gauge for Woodworking/Carpenter/Construction/DIY Tools (Black)

【Accurate Data & 360°Measuring】 The GemRed level tool applies Absolute Angle Sensor , to ensure the accuracy of data up to ±0.15°, resolution is 0.05°. 360°measuring range to meet your production needs. Conversion between absolute measurement and relative measurement. Absolute measurement mode and relative measurement mode can switch freely according to demand.
【2 in 1 & Easy Used】 The Angle Finder both measure the angle and level. Calculating quickly and accurately, it’s your good partner in woodworking, construction, mechanical work and life. ☆Easy to measure all kinds of angle and draw lines.Easy calibration and Zero setting. ☆V-notch end for checking 90° degree quickly..
【Practical LCD Display】 ☆Backlit LCD Display:Large LCD display with backlight, means that you can read clearly even in a dim environment. ☆Analogue quadrant showing ☆Display always reads upright: no matter which way it is turned..
【Locking & Holding Function】 ☆Locking Function: Good locking function could lock the measurement at any angle. ☆Holding Function:Display has a hold function to freeze movement for accuracy.If you want to use data holding function, you need to press the HOLD button rather than twist the knob..

Check Stock

VOLCANOES CLUB Magnetic Digital Angle Finder Protractor Inclinometer - Mini Digital Level Angle Gauge - Fast & Stable Measurement Tool - Backlit Display & Big Number - Woodworking Construction

HIGH ACCURACY: This digital protractor is a little angle gauge great for leveling things and measuring angles very accurately with consistent accuracy....
LARGE LED SCREEN: The display is big, clear and bright (Resolution:0.05°). Combined with its backlight, big font size and reversible display you’ll....
POWERFUL FUNCTIONS: Two Measurement Modes (absolute & relative angles measurement).
VERSATILE: This digital inclinometer is an essential tool for use in Commercial & Residential projects. It can be used in areas like decoration,....

Check Stock

YLDEE Magnetic Camber Caster and King Pin Gauge (Red)

Robust magnetic gauge mounts onto wheel/hub for quick accurate measurement of camber,castor angle kingpin inclination.
Camber gauge with fixed graduation from +5 to -5.
Adjustable caster gauge graduated +11 to -3.
Kingpin gauge graduated from 0 to 14 left to right.
Very solid, well made. Magnets are very strong, reliable and accurate! Suitable for vehicles fitted with steel wheels. To be used in conjunction with steering turntables and rear wheel level plates..
Supplied in tough composite carry-case. Suitable case with enough padding will protect the Camber Castor Gauge very well..

Check Stock

VIRTUSALE Contour Gauge 10 Inches Duplicator Tool | Quick and Instant Template Duplications | Profile Marking Gauge | Copy Irregular Shape Wood Marking Tool | Widen Master Outline Plastic Gauge

VIRTUSALE PREMIUM CONTOUR DUPLICATIONS GAUGE/ANGLE MEASUREMENT TOOL PACKAGE includes 10inch Contour Gauge x 1, Pencil x 2 and Sharpener x 1..
QUICK & INSTANT TEMPLATE TOOL Contour Gauge 2020 comes with Easy-Slide shaped blades that can improve pattern formation of any irregular objects, replicate the shape of mouldings or match cut-outs and also save your time while taking the guesswork out of your cuts..
WIDER APPLICATION of Contour Gauge such as corner cutter, measuring irregular objects, tile tools, marking gauge woodworking, wood planking, winding pipes, circular frames, auto metal sheet, ducts or precise tile cut/linoleum installation and duplicates both flat and curved surfaces effectively..
INCLUDES INCH & CENTIMETRE RULER marking on profile gauge for perfect measurement. In addition, this quick outline contour gauge duplicator ruler tool is wider than others and can measure counter depth up to 4-inch..
HIGH-QUALITY ABS PLASTIC makes this master outline shape duplicator contour gauge/laminate flooring cutter Durable, Great Quality, Tremendous strength, Rustproof. HIGH-QUALITY ASSURANCE - If you have any problem with our contour gauge within a year, please feel free to contact with us..

Check Stock

YXGOOD Universal Magnetic Gauge Tool for Car Truck Adjustable Camber Castor Strut Wheel Alignment

【Accurate Measurement】Measures the Camber and Caster angle on the wheel hub or brake disc. Attach the magnetic gauge to the hub or disc brake,suitable for accurate checking of the castor and camber angle Wheel Alignment tool"..
【Adjustable Gauge】Allows you to return the strut to the original camber position after dismantling and re-assembling the suspension or to check the amount of camber change before re-installing..
【Multi-Function】The magnetic gauge tool has a powerful magnet it can easily attached on all kind metal surfaces.Also it could be used as a normal gradienter.(Note:Please double check and make sure the panel is balance before using.You could screw the button behind the gauge to adjust panel level).
【Easy To Read】Size: 4.5’’*1.2’’*0.8’’,it has a simple leveling adjustment from -5 degrees to 5 degrees.Body of gauge is made of high density aluminum and precision level vial,high strength plasticity..
【Professional Tools】Allows adjustment to maintain correct wheel alignment and even tyre wear.Suitable for automobile cars motorcycles trucks vans SUV tire repair..

Check Stock

Beslands Backlight Digital Level Box Protractor Angle Finder Gauge Bevel Gage Inclinometer with Aluminium Framework Magnetic Base Saw Electronic Finding

Working Temperature: 32°F to 122°F (0℃ to 50℃)..
Strong Magnetic Base - Firmly fixed on saw tables, fences, blades and other metal surfaces.
reversible display reversed when inverted..
Easy carrying - Compact and lightweight, constructed of aluminum alloy and ABS, this magnetic miter gauge is compact and lightweight..
Energy Saving - Just one AAA battery (not include) can keep this energy-saving level gauge working for more than 50 hours..
Wide Range of Applications - this digital angle gauge can be used for in auto repair, machine manufacturing, table saw or miter saw blade lever measurement, constructional engineering, and for construction, woodworking, machinery, telecommunications, automobile etc..

Check Stock

Necygoo Weld Gauge Set Stainless Steel 0-60mm Cam Type Gauge and 3.2mm-25.4mm 1/8''-1'' Weld Fillet Gauge with Bag Imperial Metric Measurement Welding Gauge

❤WELD GAUGE SET❤ Package Includes 1 x Cam Type Gauge, 1 x Weld Fillet Gauge, 2 x Instructions, 2 x Bags. This Weld Gauge, with Imperial Metric Measurement, is Suitable for Measuring Length, Height, Width and Angle for Welding..
❤CAM TYPE GAUGE❤ Linear Measure Range: 0-60mm (0-2 in), Curving Measure Range: 0-20mm (0-1 in), Angle Measure Range: 0-60 Degree..
❤WELD FILLET GAUGE❤ Metric Measure Range: 3mm, 4mm, 5mm, 6mm, 8mm 9mm, 10mm, 11mm, 12mm, 14mm, 16mm, 19mm, 22mm and 25mm While Accuracy is Less Than +/- 0.5mm. Imperial Measure Range: 1/8” (3.2mm), 3/16” (4.8mm), 1/4” (6.4mm), 5/16” (7.9mm), 3/8” (9.5mm), 7/16” (11.1mm), 1/12” (12.7mm), 5/8” (15.9mm), 3/4” (19.1mm), 7/8” (22.2mm) and 1” (25.4mm) While Accuracy is Less Than +/- 1/50” ..
❤STAINLESS STEEL GAUGE❤ Both Gauge Are Made of Stainless Steel, Which is Very Durable and Won’t Be Bended Easily. With Smooth Surface and Clear Scale (Please Be Careful for The Sharp Edge When Use)..
❤PACKAGE❤ Package Includes A Cam Type Gauge, A Weld Fillet Gauge and Manual. If You Have Any Question, Please Contact Us..

Check Stock