Top Angle Grind Reviews

9341 Steel Drill Bits, High Speed Steel Milling Drill Bits 1/2 Small Shank 9341 Steel Drill Bits for Long Time Use2#

  • Be used to grind the twist drill bits of 2-15mm diameter, no limit on max.length,.
  • The min length is according to the collect, if the twist drill can be held, then it can be grind..
  • Can grind the point angle and lip relief angle.
  • The electrically controlled and powerful DC motor: stable frequency, strong horsepower and long service life..
Check Stock

IRWIN 10-Inch Circular Saw Blade, Carbide, 40-Tooth (15270)

  • Corrosion-resistant coating on the circular saw blade helps prevent rusting.
  • Precision-ground, carbide-tipped teeth let each circular saw blade make smooth, accurate cuts.
  • Circular saw blades are designed for wood cutting.
  • 16° hook angle with 40 teeth and ATB grind.
  • 10" blade length with 5/8" diamond arbor and 0.102" kerf.
Check Stock

IRWIN Tools MARATHON Carbide Table / Miter Circular Blade, 12-Inch, 40T (14080)

  • Table saw blade features #400 grit diamond-ground teeth for a smooth finish.
  • Precision-tensioned and balanced table saw blade for an accurate cut.
  • Construction-grade carbide teeth on these table saw blades for longer life.
  • 40 teeth and 20° hook angle with ATB grind.
Check Stock

Makita 5 Pack - 4.5" Grinding Wheel For Grinders - Aggressive Grinding For Metal - 4-1/2 x 1/4 x 7/8-Inch

  • ✅ 5 MAKITA Premium 4-1/2” Depressed Grinding Wheels for Metal | 4-1/2-Inch x 1/4-Inch x 7/8-Inch | Optimized for Makita 4-1/2” Angle Grinders and compatible with All 4-1/2” Angle Grinders with 5/8” arbor.
  • ✅ GRIND 2-3X MORE than lower quality & cost wheels due to this wheel’s carefully selected Grain Grit, Hard Bond Matrix & Wheel Thickness that provide balanced Grind Life, Stock Removal Rate, Precision, Power Demands & Heat Buildup, allowing you to grind longer, consistently precise with maximal wheel integrity, moderate power demands and relatively low heat buildup.
  • ✅ EASILY & SMOOTHLY GRIND all steel and metal including welds, carbon steel, structural steel, iron, steel pipes and alloy steel over an extra-long life span due to Makita’s High-performance Brown fused Aluminum Grain and hard bond matrix | Synthetic Resinoid Bond is ideal for fast stock removal, high operating speeds and aggressive grinding action used by professional metal fabrication, auto shops, maintenance repair, construction & general industrial applications.
  • ✅ AVOID Premature Disintegration, Wheel Shatter, & Injury with lower priced wheels by relying on Makita’s proprietary strong bond matrix that binds Premium White Aluminum Ox....
Check Stock

Electric Belt-Sander Polishing-Grinding Sharpener Adjustable - 13 x 1.2inch DIY Power Sanding Machine Cutter Edges Mini Bench Belt Grinder Kit, 7-Speed Multifunctional for Knife Making, Woodworking

  • BELT SANDER ATTACHMENT: By replacing the head attachment of the angle grinder. You can quickly make the angle grinder have the function of a belt sander. It is free from the restriction that a bench sander can‘t be operated at will..
  • INSTALLATION REQUIREMENTS: Belt Sander Attachment conforms to US 5/8-11 thread. Angle grinder attachment must be less than 42mm in diameter to install. It is preferred that your angle grinder has UL approval..
  • POWERFUL FUNCTIONS: Gives angle grinders the ability to grind, forge and polish. Quickly solve jobs such as welding, scratching, rusting, staining, deburring and painting. Save time. Makes it easier to make money..
  • EASY TO OPERATE: The flexible abrasive belt can grind 360° without dead angle. Large grinding area. Smooth surface after processing. Can be used on Pipe and Tube..
  • AFTER SALES SERVICE: Belt sander attachment are strictly quality controlled. You will have 3 months free return service. If you have any use and quality problems. I will give you a satisfactory reply within 12 hours.Add to Cart with Confidence！.
Check Stock

NEGOVORI Knife Sharpener,Professional Stainless Fixed Angle Sharpener,With 6 Plastic Base Whetstones, 360° Flip Rotation Fixed Angle Kitchen Chef Knife Sharpener Knife Sharpening Kit

  • ...en stove or other surface, and then use the metal blade fixing device to firmly fix the blade. Our products are designed with safety The handle is located above the blade. When you grind the stone back and forth, it will never hurt your hand.If your phone does not have a rangefinder tool to help you set an accurate angle, please download an application for measuring angles to help you set an accurate angle..
  • 【360° Free Rotation】 Our sharpener is equipped with a 360° free turning system, which allows you to turn the blade and grind the other side with a deviation of +/- 2°. You can loosen the screws on the vertical rod to adjust the desired ideal angle, while maintaining the same precise angle and edge, to quickly and safely restore the blade. Attention! If your phone has no rangefinder tool to help set the accurate angle, please download Measure APP..
  • 【 Durability and 6 kinds of high-quality whetstones with base】The metal part of this sharpener is stainless steel, which is very durable and long-lasting. (#120, #600, #1200) different thickness of stone can be used for various blades ,Also included are 3 stainless steel sharpening stones for your different needs (#240, #600, #1000)..
  • 【Wide use】 Soak the whetstone for a period of time before....
Check Stock

Huanyu MR-26D Drill Bits Grinder Sharpener Grinding Sharpening Machine 13-26 (8-32) mm 85-140 Angle (110V+CBN wheel)

  • The machine is set up with the function of adjusting a point (central point) size, which can effectively coordinate with the material of drill hole and the rotation speed. It can control the quality precision and prolong the service life of the drill bit..
  • The min length is according to the collect, if the twist drill can be held, then it can be grind.
  • Can grind the point angle and lip relief angle.
  • The electrically controlled and powerful DC motor: stable frequency, strong horsepower and long service life.
Check Stock

Robert Sorby 67HS 6 Piece Lathe Turning Set with 3/4\ Spindle Roughing Gouge, 3/8\ Spindle Gouge, 3/8\ Bowl Gouge, 3/4\ Standard Skew Chisel, 1/8\ Parting Tool and 1/2\ Round Nose Scraper 67HS

  • The large, 3” x 5” slotted platform is the ideal way to sharpen flat edged tools like wood turning skews, chisels and hand plane irons. The platform has a slot milled horizontally through it so it can accept the included tool holder. The tool holder is designed to keep your tools at the correct angle while being able to slide side to side during the sharpening process..
  • The PRO GRIND Sharpening System also comes with a number of setup jigs and accessories to help in the setup process to sharpen your tools to the proper and repeatable angles. From the built-in projection gauge on the Multi-Grind arm to the Magnetic Micro Bevel setup block you’ll be able to achieve consistent repeatable angles and produce excellent results each and every time you use the PRO GRIND Sharpening Jig system..
Check Stock

Concord Blades MCB1200T080HP 12-Inch 80 Teeth TCT Ferrous Metal Cutting Blade

  • Thin kerf allows a smooth finish w/ minimal waste. Lower hook angle improves the surface quality of the cut, increases the feed pressure required..
Check Stock

Silicon Carbide Grinding Stone Angle Grinder Wheel 3 Inch Thicken 100 Type M9 Thread Angle Grinder Polishing Wheel Buffing for Bench Buffer Electric Dril

  • Dimensions: 100 type angle grinder special, the grinding wheel comes with copper thread, can be directly installed angle grinder, simple and easy to....
  • Material: The grinding wheel is made of diamond, with long service life, high material removal rate, double thickness and double durability. Can be....
  • Rough Grinding: Two types of polishing wheels, 50 grit (coarse), 100 grit (thin). It can be used to grind various metals and non-metals, such as alloy....
  • Application: Buffing polishing wheel is installed on the mini bench buffer, bench grinder or hand electric drill, used to grind, rust, polish and....
  • Safety Protection: When using, pay attention to wearing masks, eye masks, ear muffs and other protective items. After confirming that the polishing....
Check Stock

Off-Grid Knives - Ridgeback - Bushcraft Fixed Blade Knife w. Sandvik 14C28N Blade Steel, Scandi Grind, Micarta Scales, Kydex Sheath, Hunting, Camping, Fishing, Survival

  • ...ld-leading steel manufacturer in Sweden that makes advanced stainless steels. 14C28N offers a unique combination of excellent edge performance, high hardness (HRC 61) and corrosion resistance...perfect for hard-use outdoor knives..
  • ⚙️SCANDI GRIND: The Scandi grind, also known as a "zero grind" because there's no angle change in the edge. This grind creates an edge that is made to split wood and cut with razor sharp precision, great for feather-sticking and chopping. Combine the Scandi grind with a wide belly five inch blade, simply makes baton work and chopping wood a breeze..
  • ️RELIABLE BUSHCRAFT BEAST: We designed the Ridgeback to be a tool you can rely on in all outdoor environments. Camping, Hiking, Fishing, Hunting, Bushcraft, Survival, Chopping, Feather Sticking, Wood Processing, Shelter Construction...and any situation when you're Off-Grid..
  • MICARTA SCALES: We chose Micarta due to it's stability, light weight and resistance to humidity and wet environments...ideal for outdoor survival, bushcraft and camping use...we also think the black and blue look is very easy on the eyes..
  • ERGONOMIC HANDLE: The ergos were designed for comfort and safety with a forward finger guard to prevent your hand from sliding. There's also finger notches for a 'pinch....
Check Stock

Bosch 4-1/2-Inch Angle Grinder 1375A (Renewed)

  • Compact: Weighing only 3.75 pounds, the Bosch 1375A Angle Grinder is lightweight, compact, and ideal for metal workers, vehicle fabricators, plumbers and other professionals who use grinders on a daily basis.
  • Power: The angle grinder features a Powerful 6.0 amp motor to produce 11,000 no load rpm for professional cutting and grinding applications.
  • The Efficient motor was designed with an extremely small field diameter, letting the user grind or cut with ease.
  • Comfort: The 1375A offers a 2 position side auxiliary handle specifically designed to angle to a natural position for maximum operator comfort.
  • The top handle of the angle grinder is also ergonomically designed.
  • Convenient: The angle grinder also features Bosch’s Service Minder Brush System to eliminate guesswork and stops the tool when preventative maintenance is required.
  • A 5/8 inches to 11 inch spindle works with a wide array of sizes, mounting the most popular accessories.
  • Durable: The 1375A angle grinder features an epoxy coated design to protect the tool from abrasive debris.
  • It was also designed with a sealed switch to keep dust and debris from entering the switch mechanism.
Check Stock

CMT P10024 ITK Plus Ripping Saw Blade, 10 x 24 Teeth, 10° ATB+Shear with 5/8-Inch bore

  • For fast and excellent rip cuts thanks to the shear angle design..
  • Use on radial arm saws, miter saws, table saws for cutting soft and hardwood..
  • 0.094 kerf thickness, 0.063 plate thickness, 20° cutting angle, 10° ATB+Shear grind..
  • Thin kerf reduces material waste, shear angle produces smooth cuts and improves cutting speed..
  • Special Carbide prevents from material failure, Non-Stick Orange Shield protects against corrosion..
Check Stock