Top Angle Finder Measurement Tool Reviews

General Tools TS02 ToolSmart Bluetooth Connected Digital Angle Finder, Protractor, Level and 10.5-Inch Ruler

The ToolSmart Digital Angle Finder accurately determines the angle of any corner, easily determine the angle of any corner up to 225 degrees.
This digital protractor tool is especially useful for crown moulding and flooring applications to make sure you get perfect cuts every time.
Easily send inside and outside angle measurements to your smartphone with one click and quickly figure out compound angles with the ToolSmart App.
Using the ToolSmart App, you can also quickly and easily determine the materials and tools you will need to complete your project.
This next generation miter finder and angle measurement tool also incorporates a 10.5 in. ruler and horizontal & vertical bubble levels.

Check Stock

PREXISO Angle Gauge Magnetic, Angle Finder - Digital Level Electronic, Protractor Angle Cube Inclinometer for Woodworking, Table Saw, Construction, Masonry, Machinery, 0-360° Bright Backlit Display

2 Measurement Modes & 4 Units – Turn on the equipment to directly enter the ABSOLUTE measurement mode, and press the ZERO button to switch to the RELATIVE measurement mode.
This equipment fast measurement displays angles in degrees, %, mm/m and IN/FT.
Magnetic V Groove Base & Auto Reversible Display – The pocket angle finder features sturdy V groove edges, a strong magnetic base.
When upside down, the LCD display with backlight auto rotates, ensure fast and clear reading.
TIPS: If the angle gauge is used in an incorrect position (tilts diagonally over 30 degree), screen display ERROR to remind users to use correctly.
Accurate Angle – This angle finder tool measures, sets angles, and if a surface is level.
PREXISO angle gauge has higher resolution of 0.05°and higher accuracy of ±0.1°at 0°and 90 °, and ±0.2°at other angles.
The measuring range is 0 to 360° (4×90°), buzzer will alert when it’s within ± 1° to the horizontal or vertical position.
Compact Design & Calibration Function – Mini angle gauge fits in your pocket or the storage bag that comes included to protect the equipment surface from wear.
The equipment has been calibrated in the factory. In order to ensure lasting accuracy, the equipment also has calibration function, so ....

Check Stock

Digital Angle Finder Protractor 0-360 Degree T-Bevel Gauge & Protractor with Horizontal Vertical Bubble & Full LCD Display for Woodworking, Metalworking, Construction

High Accuracy：This digital angle finder allows a full range 0-360°to measure internal angle，external angle & Contra angle Measuring precision is ±0.5°, resolution is 0.05° .You can switch between degrees and minutes to Improve the measurement accuracy , meet your requirements for different accuracy..
Four Large Control Buttons: Pressing hold button on the digital angle finder to hold the measurement at any angle, it helps the users effectively record the angle values. In addition, including power on/off, read reverse angle, flip display, and clear readout..
Digital Sliding T-bevel: Turn the center knob to lock the angle, and use the protractor to copy any angle from 0 to 360 degrees, In addition, easily get 45 degree angle with a T bevel gauge..
LCD Display & Bubble Level: This highly protractor tool is equipped with a large LCD display for easy reading and integrates a steel locking knob for adjustment. There is a perfectly positioned bubble level on the end of the digital angle finder body to ensure the level before tracing any angles and making any cuts..
Worry Free Customer Service: We back each T bevel gauge with a free 1 year exchange service plus lifetime technology support, giving you complete peace of mind. Please don’t....

Check Stock

Digital Angle Finder Protractor 0-360 Degree T-Bevel Gauge & Protractor with Horizontal Vertical Bubble & Full LCD Display for Woodworking Metalworking Construction

High Accuracy：This digital angle finder allows a full range 0-360°to measure internal angle，external angle & Contra angle Measuring precision is ±0.5°, resolution is 0.05° .You can switch between degrees and minutes to Improve the measurement accuracy , meet your requirements for different accuracy..
Four Large Control Buttons: Pressing hold button on the digital angle finder to hold the measurement at any angle, it helps the users effectively record the angle values. In addition, including power on/off, read reverse angle, flip display, and clear readout..
Digital Sliding T-bevel: Turn the center knob to lock the angle, and use the protractor to copy any angle from 0 to 360 degrees, In addition, easily get 45 degree angle with a T bevel gauge..
LCD Display & Bubble Level: This highly protractor tool is equipped with a large LCD display for easy reading and integrates a steel locking knob for adjustment. There is a perfectly positioned bubble level on the end of the digital angle finder body to ensure the level before tracing any angles and making any cuts..
Worry Free Customer Service: We back each T bevel gauge with a free 1 year exchange service plus lifetime technology support, giving you complete peace of mind. Please don’t hesitat....

Check Stock

VOLCANOES CLUB 3 in 1 Digital Angle Finder Protractor - Angle Gauge Spirit Level Ruler with INCH/MM & Level Bubble Vials - Measuring Super Gauge Tool - Decoration, Construction, Woodworking, Machinery

3 IN 1 DIGITAL ANGLE FINDER: Our angle finder is a very convenient woodworking tool in angle (inner and exterior angles) measurement, length (inches and millimeters) measurement and as a spirt level judge whether it is a level or not..
HIGH ACCURACY: The equipment has higher resolution of 0.05°and higher accuracy of ±0.1°. It can quickly and accurately calculate the angle. By adding three vials (Horizontal level/ Vertical level/ Circular level), it can be used Like a spirit level and achieve multiple measurements, such as horizontal measurement、vertical measurement as well as universal measurement . (It will not display numbers on the screen, and just help you to judge whether it is a level or not.).
FUNCTIONS AND FEATURES: ‘HOLD BUTTON’ can keep the measurement result at any angle, so as to transfer the measurement result to read and record. ‘LOCKING KNOB’ also can fix the angle shape, so as to transfer the angle and draw it on the paper. (The purpose of the locking knob is to adjust the tightness, not to lock the measurement.) ‘AUTOMATIC TURN OFF’ after 5 minutes without any operation or movement to extend the battery life. ‘HANGING HOLE’ is easy to store and carry..
MATERIAL: Our angle ruler is made of special hard plastic. Compa....

Check Stock

BOSCH 4-in-1 Digital Angle Finder GAM 220 MF

VERSATILITY: The Bosch GAM 220 MF provides four tools in one including an angle finder, miter calculator, protractor and level..
MEMORY: This angle finder provides angle memory, to provide the same angle measurement in different areas of the jobsite..
DISPLAY: Easy-to-read illuminated, rotating flip display. The miter cut calculation has an input measurement from 0-220 degrees.
DURABLE: Features robust housing with IP54 protection, making the angle finder water and dust resistant..
COMPELTE: The Bosch GAM 220 MF includes a 4-in-1 digital angle finder, 16 in. leg extension, hard thermoformed case, 4 AA 1.5V batteries..

Check Stock

Bnlcd Miter Saw Protractor, 7.3-Inch Aluminum Protractor Angle Finder Featuring Precision Laser Engraved Scales, Woodworking Angle Measuring Tool with 360 Degree Rotation Function

【MITER CUT & SINGLE CUT】This professional miter protractor has two scales to measure angles. One for a single cut which use the ourside scale, where only one piece of material is cut, and another one which use the inner scale, when two pieces of material need to be lined up/match.
【CUTTING GUIDE TOOL】Doing angle measuring first, then set the angle on your miter saw or table saw without conversion required, smarter and friendly for baseboard trimming work.
【LENGTH MEASUREMENT】INCH/CM 2 type of scales for length measurement suitable for different scenarios.
【MITER ANGLE FINDER】It's also equip with high precision level gauge design for simple tasks of level measuring, And measuring arm can 360° rotate freely without any dead angles.
【DURABLE CORNER ANGLE FINDER TOOL】D DUSSAL bevel protractor is made from high-quality ABS plastic and it's resistant to scratch and very durable without worrying about rust and deformation, well installed keep it will not loose and shake durring.

Check Stock

Gain Express Digital Protractor Angle Finder Level Inclinometer Magnetic V-Groove 0~360 Degree with Backlight

USEFUL 3-IN-1 DEVICE – This newest digital gadget features with protractor, angle finder and level in one measuring tool. Large and ultra clear....
WIDE APPLICATIONS – Great tool for automotive, wood & mechanical industries, machinery, medical fields and etc.
V GROOVE BASE – The V Groove base with strong magnets enables strong attachment over a curve or cylindrical magnetic surfaces such as metal pipeline....
CONVERTS ANGLE TO OTHER UNITS : Conversions between : 4 x 90˚ m/m : 1000mm/m, % : 100%, in/ft : 12in/ft. No more guessing or fuzzy conversion!.
ABSOLUTE & RELATIVE MEASUREMENT – The regular absolute measurement mode can only measure the angle against horizontal plane. This tool also features....

Check Stock

Digital Angle Finder, Tadeto Digital Level Inclinometer Protractor Laser Level 3 in 1 Magnetic IP54 Waterproof Angle Gauge with Large LCD Screen Backlight Type-C Fast Charging

【ABS and REF Modes】Tadeto digital levels are available in two modes, ABS for measuring absolute horizontal angles and REF for setting reference angles and then measuring relative angles. 2 modes to suit different measurement needs. A horizontal laser line can be emitted from the left and right side of the product to help mark it clearly. This measuring tool provides the most accurate results for your home decoration wall art or other DIY projects..
【High Precision and 4 Measuring Units】 The digital angle finder is designed for an accuracy of ± 0.2° with a resolution of 0.01°. Measuring range: 0 to 360° (4*90°). The digital angle finder offers 4 selectable angle measurement units, °/%/in/ft/mm/m. It uses a Class II laser limited to 1 mW continuous wave and is safe for everyday use..
【Large Screen and LCD Backlight】 The Tadeto angle finder has a circular design with a much larger than normal screen. 1.44" screen with its own LCD backlight makes the data display larger and clearer, even in very low light areas. The display is also automatically reversed when the tool is turned upside down. In addition, the digital level will automatically switch ....

Check Stock

General Tools Digital Angle Finder Ruler #822 - 5\ Stainless Steel Woodworking Protractor Tool with Large LCD Display

【High Accuracy 】This digital angle finder allows a full range 0-360° to measure internal angle，external angle & Contra angle Measuring precision is ±0.5°, resolution is 0.05° .You can switch between degrees and minutes to Improve the measurement accuracy , meet your requirements for different accuracy..
【Multi-functional Angle Finder 】This protractor combine a angle finder, ruler(7 inch/190mm) and level tools( 3 bubble, Horizontal, Vertical & Circular Level), get one and can instead of 4 pcs single function tools, make it become a helpful woodworking tools and equipment in daily use, expecially you are tire of a bulk of tools in your toolbox.
【Data Hold】Pressing hold button to hold the measurement at any angle, it helps the users effectively record the angle values. Lock angle feature helps maintain accuracy ideal for use in woodworking, construction, or drawing..
【Durable Battery】Super endurance enables it to work continuously more than 2000 hours. Digital angle Finder automatic power-off function, save power consumption and extend battery life. Protractor is equipped with a large LED for easy reading..
【Our Service 】Our worry-free 18-month warranty, and friendly customer service . So you can rest assured. There’s no worry to....

Check Stock

Aluminum Miter Saw Protractor, Thinkor 7\ Angle Finder Featuring Precision Laser Engraved Scales for Carpenters, Plumbers and All Building Trades

2 in 1 Digital Protractor: This Digital Protractor features laser-etched metric and imperial measurements on ruler edge,plus accurate digital readout,can measure both angle and length,ideal for use in carpentry, renovation work, or drawing.
High Accuracy & Durable Material: Accuracy of this corner angle finder is ±0.2 degree.Durable stainless steel ruler supports measurement between mm and inch,makes it can measure length (0~400 mm/0~7 inch) convenient and accurately.
0-360°Measuring & Locking Function: A hinge mechanism on the miter protractor allows a full 360 degrees to measure inside outside and reverse angles,and a locking screw can hold any angle when use your miter saw to make your cut.The angle finder will automatically display the reverse angle.
Zero Setting & Hold Function: Angle woodworking tool can be zeroed at any point in the swing to find relative angle.Display has a hold function to freeze movement for accuracy.Plus the display can be inverted for easy reading.
Large LCD Screen & AUTO OFF: The angle finder ruler has a large LCD display to get quick and clear digital readout. Automatically shut down after 5 minutes of inactivity.Powered by coin battery, comes with 2 batteries as gift.

Check Stock

GemRed Digital Level and Protractor, 2 in 1 Digital Angle Finder LCD Display, 10inch/270mm/360°Angle Gauge for Woodworking/Carpenter/Construction/DIY Tools (Black)

【Accurate Data & 360°Measuring】 The GemRed level tool applies Absolute Angle Sensor , to ensure the accuracy of data up to ±0.15°, resolution is 0.05°. 360°measuring range to meet your production needs. Conversion between absolute measurement and relative measurement. Absolute measurement mode and relative measurement mode can switch freely according to demand.
【2 in 1 & Easy Used】 The Angle Finder both measure the angle and level. Calculating quickly and accurately, it’s your good partner in woodworking, construction, mechanical work and life. ☆Easy to measure all kinds of angle and draw lines.Easy calibration and Zero setting. ☆V-notch end for checking 90° degree quickly..
【Practical LCD Display】 ☆Backlit LCD Display:Large LCD display with backlight, means that you can read clearly even in a dim environment. ☆Analogue quadrant showing ☆Display always reads upright: no matter which way it is turned..
【Locking & Holding Function】 ☆Locking Function: Good locking function could lock the measurement at any angle. ☆Holding Function:Display has a hold function to freeze movement for accuracy.If you want to use data holding function, you need to press the HOLD button rather than twist the knob..

Check Stock

BOSCH 5-in-1 Digital Angle Finder and Inclinometer GAM 270 MFL

VERSATILITY: The Bosch GAM 270 MFL provides five tools in one including a digital angle finder, an inclinometer, a miter calculator, a protractor and level..
MEMORY: This angle finder provides angle memory, to provide the same angle and inclinometer measurements in different areas of the jobsite..
DISPLAY: Easy-to-read illuminated, rotating flip display for the inclinometer and angle finder. The miter cut calculation has an input measurement from 0-270 degrees...
DURABLE: Features robust housing with IP54 protection, making the angle finder water and dust resistant..
COMPLETE: The Bosch GAM 270 MFL includes a 5-in-1 digital angle finder, 24 in. leg extension, hard thermoformed case, 4 AA 1.5V batteries..

Check Stock