Top Anesthesia Consumables Reviews

Battery Replacement Part No. Datex Ohmeda Anesthesia 7800 V for GE Datex Ohmeda Anesthesia 7800 V for Medical

  • Part Number---GE Datex Ohmeda Anesthesia 7800 V.
  • Fit Model---GE Datex Ohmeda Anesthesia 7800 V.
  • Battery Characteristics---Volts: 4.8 Type: Ni-MH Capacity: 3600mAh / 17.28Wh.
  • Good Service---12-month warrany, 7D*24H customer service..
  • Please use‘Ctrl+F’to find your Medical Battery model or part number. As this replacement battery can fit many models and part numbers..
Check Stock

BIGTREETECH Smart Filament Sensor Filament Break Detection Module 3D Printer Parts for 1.75mm Filament SKR V1.3 Mini E3 GEN V1.4

  • 1) It can detect nozzle plugs, consumables are entangled, and the consumables caused by extruder failure are abnormally extruded. Happening..
  • 2) It can detect that the consumables such as consumables are broken and the consumables are not used..
  • 3) Applies to the open source firmware marlin 2.0.x. Marlin2.0 uses powerful development tools, Visual Studio Code integrated development environment: support for online debugging, more helpful for product development and performance optimization, C language development, low development threshold..
  • 4) Support the motherboard with the break detection interface..
  • 5) Support screen 2004, 12864, TFT24 (12864 mode), TFT35_V3.0 (12864 mode)..
Check Stock

PT-60 Torch Electrode Contact Tip Retaining Cap Drag Shield Cap Plasma Cutting Consumables 21pcs

  • 21pcs Plasma cutting consumables kits: 5pcs electrode + 10pcs nozzle / tip + 1pc retaining cap + 5pc shield cap.
  • The plasma arc cutting consumables kits fit PT-60 / PT60 / PT-40 plasma cutting torch ,fit LTP5500 Plasma Cutter Consumables.
  • WS OEMed Plasma Arc Cutting Torch Consumables, not originalPlasma tip / nozzle diameter: 0.9mm / 0.035in,cutting current :30-40A.
  • Plasma tip / nozzle diameter: 0.9mm / 0.035in,cutting current :30-40A.
Check Stock

Hypertherm 088079 Powermax30 XP Building America Edition Hand Plasma System with Case and 15-Feet Lead

  • Auto-voltage automatically adapts to 110 V – 240 V input power. Plug adapters included..
  • Comes with hard carry case, eye shields, gloves, shoulder strap, standard consumables and Fine Cut consumables..
  • Duramax LT torch design provides a sure, comfortable grip made from heat and impact resistant material..
  • Auto-voltage automaticvally adapts to 110 V – 240 V input power. Plug adapters included..
  • Comes with hard carry case, ehe shields, gloves, shoulder strap, standard consumables and FineCut consumables..
Check Stock

WeldingStop 770496 770723 Electrode Tip for Hobart Plasma Cutter Airforce 250ci HP-25 and AirForce 500i HP-50 Torch

  • These hobart plasma cutter consumables are fitting in AirForce 250ci plasma cutter HP-25 torch and AirForce 500i cutter HP-50 plasma torch.
  • Ref. code of AirForce 250ci plasma cutter is 500534, HP-25 torch is 232647.
  • Ref. code of AirForce 500i plasma cutter is 500548, HP-50 torch is 244121.
  • The hobart 770723 plasma cutter parts kit including 5pcs electrodes and 5pcs tips, which are compatible with hobart plasma 250ci and hobart plasma 500i plasma cutter machine.
  • Every package including 10pcs airforce 250ci plasma consumables or airforce 500i plasma consumables which are made by WS.
  • All the hobart plasma cutter accessories are Replacement Parts, NOT Hobart Original Consumables.
Check Stock

WeldingStop 770496 Electrode and Tip Kit for Hobart AirForce 250ci 500i HP-25 HP-50 Plasma Torch 4-Pack

  • These hobart plasma cutter consumables are fitting in AirForce 250ci plasma cutter HP-25 torch and AirForce 500i cutter HP-50 plasma torch.
  • Ref. code of AirForce 250ci plasma cutter is 500534, HP-25 torch is 232647.
  • Ref. code of AirForce 500i plasma cutter is 500548, HP-50 torch is 244121.
  • The hobart 770496 plasma cutter parts kit including 2pcs electrodes and 2pcs tips, which are compatible with hobart plasma 250ci and hobart plasma 500i plasma cutter machine.
  • Every package including 4pcs airforce 250ci plasma consumables or airforce 500i plasma consumables which are made by WS.
  • All the hobart plasma cutter accessories are Replacement Parts, NOT Hobart Original Consumables.
Check Stock

Grafco Medium \C\ Handle, Fiberoptic Illumination, Laryngoscope Tools, 1196FH

  • STAINLESS STEEL CONSTRUCTION: The non-glare satin finish surgical tool is made of superior craftmanship to ensure a rust-resistant, non-corrosive & durable equipment experience for a long-lasting usage..
  • VERSATILE & PRECISE: The medical tool has medium "C" battery handle to accommodate different blades ideal for operating rooms, surgical facilities, and medical kits and are excellent for delicate procedures when precise control is needed..
  • CURVED BLADES: Exposure of the larynx is achieved through positioning of the curve design tip in the vallecula, anterior to epiglottis, lifting it out of view. It is used by most anesthesia personnel for laryngoscopy and tracheal intubation..
  • MEDICAL-GRADE SET: Includes 1 medium "C" battery handle, 4 blades (1 each for #1, #2, #3, #4) and hand carry case. The laryngoscope set is used with general anesthesia for visualization or surgical procedures of the larynx by professional doctor..
  • BRAND TRUST: From bandages to sundry jars and everything in between, Grafco products offer healthcare facilities a single source for all their medical-surgical product needs..
Check Stock

Dyllica 9-8213 Plasma Start Cartridge 9-8277 for Thermal Dynamics CutMaster 52 Consumables SL60 SL100 Plasma Part Consumables 1pc

  • 【Dyllica Brand Plasma Start Cartridge】The plasma Start Cartridge 9-8277 is made by Dyllica Brand.
  • It can be used as plasma aftermarket parts which can install on DYThermal Dynamics SL60 SL100 plasma torch.
  • 【Plasma Consumables Type & Ref Number】Plasma Start Cartridge, item ref number is 9-8213 / 9-8277.
  • 【As SL60 Plasma Consumables Usage】The 9-8213 /9-8277 Plasma Start Cartridge can install on DYThermal Dynamics SL60 torch with Cutmaster 38 / 52 / 12 / 20 /25 plasma cutter machine.
  • 【As SL100 Plasma Consumables Usage】The 9-8213 /9-8277 Plasma Start Cartridge also can install on DYThermal Dynamics SL100 torch with Cutmaster 102 / 152 / 40 plasma cutter machine.
  • 【As SL60QL Plasma Consumables Usage】The 9-8213 /9-8277 Plasma Start Cartridge also can install on DYThermal DynamicsSL60QL torch with Cutmaster 58 / 60i plasma cutter machine.
Check Stock

Anesthesia Sputum Suction Breathing Circuit Extension Tube Hose Supplies L Type Multifunction Anesthesia Sputum Suction Replacement Short Tube Anesthesia Sputum Suction Expansion

  • Expansion Tube Retractable-Easy to Use: The tube can be bent freely, which is not easy to hinder the operation of people, and can be used with confidence. Can be used for patients who need respiratory, for all ages..
  • Sputum Tube Expansion-Replacement Short Tube Accessory: Makes post operative use easier and more convenient to operate. Made of excellent plastic material, durable, waterproof, light weight, and a good insulator.
  • Anesthesia Sputum Suction-Hose Supplies: Supporting breathing air supply equipment to deliver breathing gas or mixed gas to patients.
  • Sputum Suction Expansion-Breathing Circuit Expansion Tube: it could be perfectly connected in place during use..
  • Anesthesia Suction Expansion-Professional Tool: Easy to disassembled and installed more quickly when in use..
Check Stock

Drag Shield Hand 60485 Retaining Cup 60389C fit Plasma Cutting IPT-60 PT-60 Torch 6-PKG

  • These plasma cutting torch consumables can use on IPT-60, IPTM-60, PT-60, PTM-60 Series plasma cutting torch.
  • Package including 1pc Retaining Cup + 5pcs Drag Shield.
  • There are 6pcs plasma cutter IPT60 consumables in every package.
  • The plasma cutting current is about 30-60A.
  • They are WS replacement parts, NOT Original plasma consumables kits.
Check Stock

WeldingStop PT-60 IPT-60 Retaining Cap 60389C Drag Shield 60485 Electrode Plasma Contact Cutting Consumables PKG/46

  • These plasma cutting torch consumables can use on IPT-60, IPTM-60, PT-60, PTM-60 Series plasma cutting torch.
  • Package including 20pcs Electrodes + Tips and 1pc Retaining Cup + 5pcs Drag Shield.
  • There are 46pcs plasma cutter IPT60 consumables in every package.
  • The diameter of tips are 0.9mm or 0.035 inches, plasma cutting current is about 30-40A.
  • They are WS replacement parts, NOT Original plasma consumables kits.
Check Stock

Amico CUT50-G100 100-Pcs Plasma Cutter Consumables Nozzles Electrodes and Cups for AMICO CUT-50 APC-50 & CTS-200

  • AMICO Power designed professional consumables set for models CUT-50/60 APC-50/60 and CTS-200..
  • High quality 60 Amp (SG-55/AG-60) plasma cutter torch consumables..
  • the duration is five times longer than other products..
  • It can also withstand extremely high temperatures, making it extremely suited for professional cutting..
  • 40 pieces torch nozzles, 40 pieces torch electrodes, 20 pieces ceramic shield cups, Total 50 piece of consumables..
Check Stock

Amico CUT50-G50 50 pcs Plasma Cutter Consumables Nozzles Electrodes and Cups for AMICO CUT-50 APC-50 & CTS-200

  • AMICO Power designed professional consumables set for models CUT-50/60 APC-50/60 and CTS-200..
  • High quality 60 Amp (SG-55/AG-60) plasma cutter torch consumables..
  • the duration is five times longer than other products..
  • It can also withstand extremely high temperatures, making it extremely suited for professional cutting..
  • 20 pieces torch nozzles, 20 pieces torch electrodes, 10 pieces ceramic shield cups, Total 50 piece of consumables..
Check Stock