Top Anchor Bolt Cleaning Kit Reviews

Anchor & Escutcheon Pool Rail Set, 4-Inch Anchor for 1.90-Inch Outer Diameter Tubing- Two Pack

Convenient pool rail or ladder anchor and escutcheon kit: includes 2 bronze anchors and 2 escutcheon plates.
Escutcheon plates hides the anchor and gives a finished look to a rail.
Bronze anchors are 4″ deep, accommodates 1.90″ diameter rails.
1/2-inch tall and accommodates 1.90″ diameter rails.
Kit is necessary to install a pool rail or ladder on a pool.

Check Stock

DANCO Brass Closet Bolts with Nuts and Washers Toilet Bolt Set, 1/4 inch x 2-1/4 inch, Brass, 12-Set (80156)

Universal Toilet Bolt Caps: Including 8 back toilet bolt caps, 8 covers and 8 washers. Perfect for worn-out toilet bolt covers, or conceal any unsightly, protruding or rusted toilet floor bolts..
Easy to Use: Our toilet bolt screw covers are easy to install with snap-on inserts, only need some simple household tools to complete the Installation, These decorative toilet bolt covers have a white palette to blend in with your toilet seat for a refined look..
Universal size: These toilet bolt caps are 1.4" high, 0.84" width, the hole is 0.52" * 0.32".
that fit a wide variety of toilet seat brands, can fit and cover different size toilets bolts..
Sturdy & Durable: Made of strong plastic, durable and reliable, easy cleaning and maintaining, can be used a long time..
Useful Design: The toilet anchor bolt cover is round with a decorative design. Don't worry about the toilet bolt cover falling off. This is an economical and effective solution to cover the sometimes rusty or dangerous toilet floor bolts..

Check Stock

Ironwood Pacific AnchorLift Anchor Puller for River and Lake Anchoring, Floats up to 80 lbs

FLOAT YOUR ANCHOR OR CRAB TRAP TO THE SURFACE - The AnchorLift Anchor Puller easily floats anchors, crab traps, and lobster pots up to 80 lbs..
EASY-TO-USE ANCHOR RETRIEVAL SYSTEM - Slide the AnchorLift over the anchor line, tie off to a cleat and let the anchor out by holding the sliding bolt in the up position. When anchored toss the AnchorLift with buoy into the water. To raise your anchor motor your boat forward to float the anchor to the surface..
IDEAL FOR ANCHORING IN RIVERS AND LAKES - Use in place of a winch or windlass. Sliding stainless steel bolt grabs line and locks anchor at water's surface. Designed for use with anchor lines 3/8" to 5/8" in diameter..
QUALITY CONSTRUCTION - Made from marine grade nylon with stainless steel at all wear points. For extra heavy-duty use, consider our anodized aluminum AnchorLift Pro model. (Link in description below)..
MADE IN THE USA - The AnchorLift Anchor Puller and Polyform buoy are made in the USA and backed by a limited lifetime warranty..

Check Stock

KwikSafety (Charlotte, NC) SCORPION KIT | 1D Full Body Safety Harness, 6 ft. Lanyard Attached, 3 ft. Cross Arm Strap Anchor ANSI OSHA PPE Fall Protection Arrest Restraint Construction Roofer Bucket

...COMPLIANT - All of the items in the SCORPION KIT are ANSI/ASSE and OSHA compliant, A personal fall arrest system is required when working 6ft. or more above lower levels & usually consist of a full body harness, a declaration device, a lanyard and a an anchor point. Construction, Arborist, Window Washer, Gutter Cleaning, Roofing, Search and Rescue..
SAFETY HARNESS - The KwikSafety SCORPION Full Body 3D Ring Safety Harness supports users within the capacity range of 130 to 310 pounds (59 to 140 kg). To ensure proper fit, ensure that all pass-through connectors are connected and aligned, leg and shoulder straps are snug, and chest straps are in the center of the chest area..
SAFETY LANYARD - The 6’ internal shock-absorbing lanyard makes the SCORPION a more lightweight fall protection device. A dual-action, double-locking snap hook prevents accidental rollout while remaining easy to latch on to your anchor point. Tensile strength (max load) for the snap hook is rated at 5,000 pounds with a gate strength of 3,600 pounds. Meets American National Standards Institute (ANSI) Z359.12 standards..

Check Stock

Glarks 42Pcs 6 Size Heavy Duty Zinc Plated Steel Molly Bolt Hollow Drive Wall Anchor Screws Assortment Kit for Drywall Plaster and Tile

★【Product Type】: High quality heavy duty molly bolt drive hollow drive wall anchor screws kit..
★【Package】: In this kit, it include 6 size of 4x32mm, 4x60mm, 5x52mm, 5x65mm, 6x52mm, 6x65mm total 42pcs packed in a durable plastic box, convenient for your use and storage..
★【Material】: They are made of high quality zinc plated carbon steel, rust resistance and corrosion resistance, strong and durable enough for you to hanging items..
★【Feature】: Heavy-duty hollow drive wall anchor expansion when installing, providing strong bearing capacity and safety..
★【Application】: Widely used in drywall, hollow block, plaster, tile, perfect for hanging curtain rods, lamps, photo frames, coat racks, power switches..

Check Stock

Glarks 60Pcs Heavy Duty 1/8 inch 35/46/59mm Zinc Plated Steel Molly Bolt Drive Hollow Drive Wall Anchor Screws Assortment Kit

♛ Product Type: High quality heavy duty molly bolt drive hollow drive wall anchor screws assortment kit..
♛ Package: In this kit, it include 3 size of 1/8SDx35mm, 1/8SDx46mm, 1/8SLDx59mm each for 20pcs, total 60pcs drive wall anchors packed in a durable plastic box, convenient for your use and storage..
♛ Quality: All the anchors are made of high quality zinc plated carbon steel, rust resistance and corrosion resistance, durable enough for you to hanging items..
♛ Feature: Heavy-duty hollow drive wall anchor expansion when installing, providing strong bearing capacity and safety..
♛ Application: Widely used in drywall, hollow block, plaster, tile, perfect for hanging curtain rods, lamps, photo frames, coat racks, power switches..

Check Stock

Squeak Ender 2084 Hardwood Floor / Subfloor Squeak Eliminator Brackets - Quantity 4

Quantity of (4) : Squeak Ender Floor Squeak Eliminator Brackets # 2084.
Quickly and permanently eliminate annoying wood floor squeaks.
This kit installs from beneath the floor and works by pulling the loose sub-floor tight to the joist ..
Each Kit Includes (1) 4″ adjustable floor joist bracket, (1) 2″ square floor anchor plate, (1) 1/4-20 x 6 inch carriage bolt, (1) 1/4-20 hex nut, (1) 1/4 washer and (4) #10 x 5/8″ sub-floor wood screws.

Check Stock

Squeak Ender 2084 Hardwood Floor / Subfloor Squeak Eliminator Brackets - Quantity 6

Quantity of (6) : Squeak Ender Floor Squeak Eliminator Brackets # 2084.
Quickly and permanently eliminate annoying wood floor squeaks.
This kit installs from beneath the floor and works by pulling the loose sub-floor tight to the joist ..
Each Kit Includes (1) 4" adjustable floor joist bracket, (1) 2" square floor anchor plate, (1) 1/4-20 x 6 inch carriage bolt, (1) 1/4-20 hex nut, (1) 1/4 washer and (4) #10 x 5/8" sub-floor wood screws.

Check Stock

Squeak Ender 2084 Hardwood Floor / Subfloor Squeak Eliminator Brackets - Quantity 24

Quantity of (24) : Squeak Ender Floor Squeak Eliminator Brackets # 2084.
Quickly and permanently eliminate annoying wood floor squeaks.
This kit installs from beneath the floor and works by pulling the loose sub-floor tight to the joist ..
Each Kit Includes (1) 4" adjustable floor joist bracket, (1) 2" square floor anchor plate, (1) 1/4-20 x 6 inch carriage bolt, (1) 1/4-20 hex nut, (1) 1/4 washer and (4) #10 x 5/8" sub-floor wood screws.

Check Stock

Squeak Ender 2084 Hardwood Floor/Subfloor Squeak Eliminator Brackets - Quantity 13

Quantity of (13) : Squeak Ender Floor Squeak Eliminator Brackets # 2084.
Quickly and permanently eliminate annoying wood floor squeaks.
This kit installs from beneath the floor and works by pulling the loose sub-floor tight to the joist ..
Each Kit Includes (1) 4" adjustable floor joist bracket, (1) 2" square floor anchor plate, (1) 1/4-20 x 6 inch carriage bolt, (1) 1/4-20 hex nut, (1) 1/4 washer and (4) #10 x 5/8" sub-floor wood screws.

Check Stock

Squeak Ender 2084 Hardwood Floor/Subfloor Squeak Eliminator Brackets - Quantity 9

Quantity of (9) : Squeak Ender Floor Squeak Eliminator Brackets # 2084.
Quickly and permanently eliminate annoying wood floor squeaks.
This kit installs from beneath the floor and works by pulling the loose sub-floor tight to the joist ..
Each Kit Includes (1) 4" adjustable floor joist bracket, (1) 2" square floor anchor plate, (1) 1/4-20 x 6 inch carriage bolt, (1) 1/4-20 hex nut, (1) 1/4 washer and (4) #10 x 5/8" sub-floor wood screws.

Check Stock

CONFAST 5/8\ Lag Shield Anchor Long (25 per Box)

READILY ACCEPTS MACHINE BOLTS-Any coarse threaded bolt can be used.
INTERNAL THREADS-Bolt can be removed easily.
BOLT EXPANDS ANCHOR-No need for setting tools.
CAN BE INSTALLED IN CONCRETE, BRICK OR BLOCK-Versatile anchor for most masonry applications.

Check Stock

TOGGLER SNAPTOGGLE BCS Toggle Anchor, 304 Stainless Steel Channel, Made in US, 3/8\ to 2-1/2\ Grip Range, For 3/8\-16 UNC Fastener Size (Pack of 25)

Practical Kit: Zinc plated steel round head is used for hanging and fixing heavy objects. It is easy to use and bring more convenience to your life.
Premium Material: This toggle bolt and wing nut kit is made of high quality zinc plated steel which is strong and sturdy and offers good corrosion resistance and rust resistance in bad environment like high temperature, cold weather, and high humidity areas.
Wide compatibility: Widely used for hollow brick, gypsum board, cement fiber board, wood board and other hollow substrates, Suitable for installing light fixtures such as lamps, curtain rods, photo frames, coat racks, power switches.
Three Sizes: We have prepared 3 sizes of toggle bolt and wing nut kit, a complete kit, for you to meet different needs in your daily life.
What You Get: 1/8inch: 8pcs, 3/16inch: 8pcs, 1/4inch: 8Pcs, Lenink butterfly screws anchor drywall provide you with a more convenient driling way. Please feel free to contact us if you have any problem.

Check Stock