Top Analog Sensor Weighing Sensors Reviews

Agatige SZT15-CH-10V AC Current Transducer Relay, Current Mutual Inductor Transmitter

  • The Hawkeye 921 provides accurate load trending information with a proportional 4-20mA output signal..
  • Preset slide-switches provide easy field setup of sensed amperage range with no need for jumpers..
  • Applications: Load trending. Motor control. Fan/Pump Status. Loop powered analog current sensor simplifies installation. Power the sensor, and receive the signal with only two wires..
  • Lower cabling and commissioning costs than with traditional 3-wire sensors. Self-gripping split-core for fast retrofit installation..
Check Stock

ACEIRMC 4pcs Si7021 GY-21 SHT21 HTU21 Digital Humidity Temperature Sensor Module Replace SHT11 SHT15

  • The humidity and temperature sensor board that carries a digital SHT21 humidity and temperature sensor from Sensirion..
  • Si7021 GY-21 Module Industrial High Precision Humidity Sensor I2C IIC Interface Module For Arduino Low Power CMOS IC Module.
  • It has a 4-pin interface that can communicate directly with the analog pins.
  • It can be used as a hardware- and software-compatible drop-in upgrade for existing RH/temperature sensors in 3x3 mm DFN-6 packages, featuring precision sensing over a wider range and lower power consumption..
  • The Si7021 offers an accurate, low-power, factory-calibrated digital solution ideal for measuring humidity, dew-point, and temperature, in applications ranging from HVAC/R and asset tracking to industrial and consumer platforms..
Check Stock

AEM 30-3511 Infinity 6/8h Plug in Play Jumper Harness for 2003-2005 Mitsubishi Lancer Evolution / EVO 8 VIII

  • AEM’s Plug & Play harness for Mitsubishi Evo engines includes a Wideband O2 connector, AEMnet connector for communication with other AEMnet enabled devices and an auxiliary connector with a Deutsch DTM 12P connector for adding common aftermarket sensors including fuel pressure, air inlet temperature, MAP, oil temperature and ethanol content sensor..
  • The expansion port also includes a sensor ground, 5v reference, 12v power from relay and high side output for activating a relay or solenoid, a low side output for boost control and analog inputs for mode switch and no-lift shift..
Check Stock

uxcell Sound Microphone Sensor Detection Module with DO AO for Arduino UNO R3 AVR PIC 5pcs

  • This sound module can detect sound strength of the environment.
  • Good for learning basic knowledge about Arduino and sensors.
Check Stock

uxcell Sound Microphone Sensor Detection Module with DO AO for Arduino UNO R3 AVR PIC 3pcs

  • This sound module can detect sound strength of the environment.
  • Good for learning basic knowledge about Arduino and sensors.
Check Stock

uxcell Microphone Sound Sensor Voice Detection Module with Digital and Analog Out for DIY Projects 5pcs

  • This sound module can detect sound strength of the environment.
  • Good for learning basic knowledge about Arduino and sensors.
Check Stock

uxcell Microphone Sound Sensor Voice Detection Module with Digital and Analog Out for DIY Projects 3pcs

  • This sound module can detect sound strength of the environment.
  • Good for learning basic knowledge about Arduino and sensors.
Check Stock

AITRIP 10 Pack Capacitive Soil Moisture Sensor Corrosion Resistant for Arduino Moisture Detection Garden Watering DIY Electronic for Arduino and Raspberry Pi (10PCS)

  • This capacitive soil moisture sensor is distinguished from most resistive sensors on the market and uses capacitive sensing to detect soil moisture. The problem that the resistance sensor is easily corroded is avoided, and its working life is greatly extended..
  • The sensor has a built-in voltage regulator chip that supports a 3.3-5.5V working environment, which means it works even on a 3.3-5.5V Arduino control board. A miniature PC such as the Raspberry Pi only needs an external ADC (analog to digital signal) conversion module to work..
  • With an external screen and a motherboard, you can talk to your plants! See if it is thirsty and you don't need more water to moisten.Garden plants, Moisture detection, Intelligent agriculture.
  • Interface: PH2.54-3P, Size: 98 x 23mm (LxW).
  • Package Includes: 10pcs Capacitive Soil Moisture Sensor.
Check Stock

KOOKYE 5PCS Temperature Sensors TMP36 Precision Linear Analog Output For Arduino Raspberry Pi

  • 5PCS ADI TMP36GZ temperature sensors,High accuracy solid state temperature sensor..
  • Voltage Input: 2.7V to 5.5V DC,Output range: 0.1V (-40°C) to 2.0V (150°C).
  • Temperature range: -40°C to 150°C / -40F to 302F 2°C accuracy.
  • Outputs an analog voltage that is proportional to the ambient temperature.
Check Stock

Autel TPMS MX-Sensor 4 Pack, 2023 Tire Pressure Monitor Sensors 2 in 1 315/433MHz, OE-Level Sensor with TPMS Programming, Compatible with MaxiTPMS TS408/TS508/MK808TS/MP808TS (Metal Valve, Press-in)

  • 【2023 Million-selling Autel TPMS Sensors】Why more and more users are choosing Autel MX-Sensors? 1) 2-in-1 TPMS sensors (315+433MHz), same functionality as OEM tire sensors.
  • 2) Powerful 5-year battery life and strict quality control lessen your repair cost.
  • 3) 99% of worldwide car coverage increases repair orders for workshops.
  • 4) Being unlimited programmed, easy to install & operate.
  • 5) Patented press-in design save more installation time..
  • 【315 & 433MHz in 1 Sensor】Manufactured to outperform OEM TPMS sensors in frequency strength and compatibility, Autel tire pressure monitor sensor possesses both 315 & 433MHz frequency in 1 sensor (while other brands with ONLY one frequency), to universal fit various vehicle needs and better manage sensor inventory for tire shops..
  • 【Universal for Global 99% of Cars】With 99% of car coverage and similar functionality as the OEM sensor available, the Autel sensor has become an essential part for American tire repair shops and is capable to replace 99% of OEM tire sensors on the market. Autel 1-SKU TPMS sensors with 2-in-1 frequency also lower inventory pressure for dealers and increase repair profits for works....
Check Stock

Getting Started with the micro:bit: Coding and Making with the BBC's Open Development Board (Make)

  • Specially designed for Microbit board. This kit includes a keyestudio sensor shield fully compatible with micro bit and other commonly used 37 kinds of sensor modules. It's compatible with both microbit v1.5 and v2, microbit board not include!.
  • Designed to learn electronics programming. Great hands on STEM kit to get started with the micro bit. The product needs to be debugged before use, such as an LED display module. Please use an external power supply and debug the backlight brightness..
  • The kit gives 37 kinds of common sensors, such as Digital LED Module, Analog Temperature Sensor, Photocell Sensor, Ultrasonic Module etc, allow you make a lot of interesting projects like Traffic Light, Magnetic Check, Temperature Test, Joystick Test, Photo-interrupter Test, Alcohol Detection and so on..
  • We have detailed tutorial( included introduction, wiring diagram, test code, driver installation, Example Projects...... Step by step to explain how to use on our wiki page..
  • Solder is very clean, everything is aligned nicely, all boards are well packed after function, voltage, current testing, protected in a beautiful box. Up to FCC and CE Standard: made from environmentally friendly components and materials..
Check Stock

Autel Scanner MaxiTPMS ITS600 TPMS Tool, Updated from Autel TS508/TS601/TS608, Top TPMS Relearn & Sensor Programming Tool with 4 Special Functions(Oil Reset, BMS, SAS, EPB), VIN Scan & Tire Service

  • 【2023 Newest Upgrade TPMS Tool of TS501, TS408, TS401】As a newest upgrade, Autel TS508 has packed almost ALL TPMS functions including one step TPMS health check, read & clear TPMS codes, on-screen DTC description, reset TPMS warning light, activate/relearn both OE and aftermarket TPMS sensors, read sensor data, program Autel MX-sensors, and unique features like check key fob frequency, quick/advanced mode, Tire Type/ Pressure Selection for faster & better TPMS repairs & services..
  • 【Activate/Relearn TPMS Sensors】To turn off the TPMS warning light after replacement, you need to relearn the sensors! Autel TS508 TPMS Reset Tool can wirelessly activate & relearn all OE or aftermarket TPMS sensors. TS508 can retrieve TPMS sensor data like Sensor ID, Tire Pressure, Tire Temperature, Sensor Battery, Sensor Position, Frequency, etc and provides you with 3 ways of on-tool relearn procedures: 1. Stationary Relearn. 2. Automatic Relearn. 3. Relearn by OBD (not included in TS508)..
  • 【Program Autel MX-Sensors】Autel TS508 TPMS Programming Tool allows both DIYers and auto technicians to program sensor data to Autel MX-sensors(315/433MHz) in no time! TS508 comes with 4 TPMS sensor programming options: 1. Copy By Activation, 2. Copy By Manual Input, 3. Auto C....
Check Stock

Nikon 8072 Microfiber Cleaning Cloth

  • Package includes 14pcs 24mm Sensor Cleaning Swabs for Full-Frame Sensors and 15ml Sensor Cleaner.
  • Every sensor cleaning swab is made in a 100% dust-free environment and sealed in a vacuum package.
  • Super soft and flexible swab head spreads pressure evenly across the sensor and cause NO damage.
  • The sensor cleaner is made from ultrapure water, clean sensors without leaving streaks or blemishes.
  • The sensor cleaner is safe for both CCD and CMOS image sensors.
Check Stock