Top Analog Input Reviews

Musou RCA Analog to Digital Optical Toslink Coaxial Audio Converter Adapter with Optical Cable Power Adapter

This is a Analog to Digital converter(Can NOT be used as a Digital to Analog Converter),Converts analog stereo audio signal from R/L input to Coaxial and Toslink outputs simultaneously..
Please note carefully the input and output of Musou Analog to Digital converter: INPUT is R/L and a 5v1A power supply, and its output Toslink and Coacial..
Digital audio cable length can run up to 15 feet without signal degradation. Supports output sampling rate at 48KHz.
Supports uncompressed 2-channel LPCM digital audio signal output.Supports output sampling rate at 48 KHz.【Solve audio problems by setting PCM audio format.】.
Provides electromagnetic-noise-free transmission.Note! only outputs 2 channels of sound.

Check Stock

BNC to HDMI Converter, BNC to HDMI Video Converter 720p/1080p Switch Coax to HDMI Converter Transfer Analog Video Signal from CCTV Security Camera to HD Monitor Projector Computer

[DCDI Processing Technology]: The BNC signal is multiplied to the HD 1080P / 720P @ 50 / 60Hz output. Can convert standard definition video format (480i, 480p, 720p, 1080i), through the Scaler UP technology, into the high-definition 1080P @ 50 / 60Hz and then output..
[Specification]: The system defaults to BNC signal input. RCA audio and video input, HDMI output.
ONLY FOR ANALOG CAMERA. Before you purchase it, please check your device is an analog camera.
[Features]: The bnc to hdmi is adopting I2S technology, superimpose incoming L / R analog audio signal on the HDMI, for the elimination of analog audio cable transmission interference.
[3D Compensation Techonology]: The bnc to hdmi converter with 3D compensation technology, effectively eliminate the fast moving picture jitter, Color Optimization and Digital Noise Reduction.
[Suit For]: The converter box is specially designed to covert BNC analog signals to HDMI signals, with audio port to input audiable signals. It only work for ANALOG CAMERA. It can't convert cable TV signal, can't convert digital camera or AHD/TVI/CVI camera.

Check Stock

74LS153 Dual 4-Input Multiplexer (2 Pack)

Wide Range of Digital and Analog Signal Levels Digital: 3 V to 20 V Analog: ≤ 20 VP-P, Break-Before-Make Switching Eliminates Channel Overlap.
Low ON Resistance, 125 Ω (Typical) Over 15 VP-P Signal Input Range for VDD – VEE = 18 V.
High OFF Resistance, Channel Leakage of ±100 pA (Typical) at VDD – VEE = 18 V, Maximum Input Current of 1 µA at 18 V Over Full Package Temperature Range, 100 nA at 18 V and 25°C.
Logic-Level Conversion for Digital Addressing Signals of 3 V to 20 V (VDD – VSS = 3 V to 20 V) to Switch Analog Signals to 20 VP-P (VDD – VEE = 20 V) Matched Switch Characteristics, rON = 5 Ω (Typical) for VDD – VEE = 15 V Very Low Quiescent Power Dissipation Under All Digital-Control Input and Supply Conditions, 0.2 µW (Typical) at VDD – VSS = VDD – VEE = 10 V.
Binary Address Decoding on Chip, 5 V, 10 V, and 15 V Parametric Ratings, 100% Tested for Quiescent Current at 20 V.

Check Stock

Digital to Analog + Bluetooth Receiver USB Music Player Digital to Analog Converter with Headphone Amplifier Built-in Bluetooth V5.0 Receiver

Digital to analog audio converter：Convert optical/coaxial Toslink digital pulse code modification (PCM) and line pulse code modification (LPCM) audio signals to analog (RCA and AUX 3.5mm Jack) audio simultaneously..
Volume control design：Digital to Analog Converter comes with its own professional volume control knob,which makes it super easy to adjust the output volume of both RCA and AUX.This supports the simultaneous play of both the speakers and headphones..
Supports all popular sample rates：Digital to Analog Converter accepts uncompressed digital audio as input with 192kHz/24bit,96kHz,48kHz,44.1kHz,32kHz as sample rates and provides electromagnetic-noise-free transmission..
Bluetooth：Digital to Analog Converter support Bluetooth 5.0 version. SBC,AAC decoder and signal distance up to 10 meters with Bluetooth antenna..
Compatibility：Digital to analog audio converter is specially designed for either home or professional audio signal switching. It converts coaxial, Toslink digital audio, stereo audio or Bluetooth signals to analog stereo audio signal. It is also a digital music player with USB Flash Drive input supporting MP3,WAV,APE,FLAC and WMA lossless formats..

Check Stock

Juried Engineering CD4016BE CD4016 4016 100-pA 20-V 1 1 SPST 4-Channel Analog Switch Breadboard-Friendly IC DIP-14 Pack of 10

... low off-state switch leakage resulting in very low offset current and high effective off-state resistance: 100pA typ. @ VDD–VSS = 18 V, TA = 25°C, Extremely high control input impedance (control circuit isolated form signal circuit: 10^12 ohm typ., 100% tested for quiescent current at 20 V.
Example Applications: Analog signal switching/multiplexing: Signal gating, Squelch control, Chopper, Modulator, Demodulator, Commutating switch, Digital signal switching/multiplexing, CMOS logic implementation, Analog-to-digital & digital-to-analog conversion, Digital control of frequency, impedance, phase, and analog-signal gain.

Check Stock

Juried Engineering CD4016BE CD4016 4016 100-pA 20-V 1 1 SPST 4-Channel Analog Switch Breadboard-Friendly IC DIP-14 Pack of 20

... low off-state switch leakage resulting in very low offset current and high effective off-state resistance: 100pA typ. @ VDD–VSS = 18 V, TA = 25°C, Extremely high control input impedance (control circuit isolated form signal circuit: 10^12 ohm typ., 100% tested for quiescent current at 20 V.
Example Applications: Analog signal switching/multiplexing: Signal gating, Squelch control, Chopper, Modulator, Demodulator, Commutating switch, Digital signal switching/multiplexing, CMOS logic implementation, Analog-to-digital & digital-to-analog conversion, Digital control of frequency, impedance, phase, and analog-signal gain.

Check Stock

Juried Engineering CD4016BE CD4016 4016 100-pA 20-V 1 1 SPST 4-Channel Analog Switch Breadboard-Friendly IC DIP-14 Pack of 5

... low off-state switch leakage resulting in very low offset current and high effective off-state resistance: 100pA typ. @ VDD–VSS = 18 V, TA = 25°C, Extremely high control input impedance (control circuit isolated form signal circuit: 10^12 ohm typ., 100% tested for quiescent current at 20 V.
Example Applications: Analog signal switching/multiplexing: Signal gating, Squelch control, Chopper, Modulator, Demodulator, Commutating switch, Digital signal switching/multiplexing, CMOS logic implementation, Analog-to-digital & digital-to-analog conversion, Digital control of frequency, impedance, phase, and analog-signal gain.

Check Stock

6 Pieces ADS1115 Analog-to-Digital Converter 16 Bit ADC 4 Channel Module Converter with Programmable Gain Amplifier ADC Converter Development Compatible with Arduino Raspberry Pi

/ – Bi-directional universal audio converter and Dolby Digital decoder supports both analog to digital audio signal conversion (ADC) and digital to analog audio signal conversion (DAC)..
– Fully licensed Dolby decoder automatically downmixes a multichannel digital audio signal for compatibility with any stereo playback system, analog or digital..
– Simultaneously converts an analog L/R stereo, digital optical SPDIF TosLink or digital coaxial audio input into three audio outputs with electronic noise free transmission..
use the input select switch to choose between optical, coaxial or L/R inputs. LPCM input sampling rates 32 to 96 kHz, output 48kHz.
– All J-Tech Digital products include a One-Year Manufacturer Replacement Warranty and free lifetime technical support from our customer support team located in Sugar Land, TX. Support is available from 9AM – 6PM CST, Monday through Friday. Contact information available on our seller page..

Check Stock

SOUTHSKY Audio Converter, Stereo Analog to Digital Converter Adapter, 3.5mm Aux Jack R/L 2 RCA Cinch to SPDIF,Toslink, Optical,Coaxial Converter

【Stereo analog to digital audio converter】 Convert analog stereo signals from 3.5mm aux jack or R / L 2 cinch input connections to digital SPDIF, Toslink, optical, coaxial output connections. Warning, this adapter only supports analog to digital, not digital to analog, not bidirectional.
【Connection interfaces with LED Indicator】 Metal housing, input: 1x3.5mm aux jack, 2xRCA R / L, left and right stereo analog channel.
Output: 1xSPDIF (Toslink, optical), 1xCoaxial.
【High sampling rate of L / PCM】 Support sampling rate 32,44,1,48 and 96 kHz, R / L channel of S / PDIF is 24 bit, electromagnetic noise-free transmission. Note: Supports output of uncompressed 2-channel digital audio signals only. Not compatible with Dolby 5.1 or 7.1 or DTS.
【Wide range of applications】 Supports switching the audio interface from HDTV, PC, laptop, computer, DVD player to your audio devices such as AV receivers, amplifiers, active speakers, soundbar..
【Scope of delivery】 1x analog-to-digital audio converter, 1x USB power cable, 1x fiber optic cable, 1x 3.5 mm to 2 cinch cables ， 1x user manual.

Check Stock

Sound Blaster X-Fi Go! Pro r2 Creative USB audio interface SB-XFI-GPR2

Analog Input: 16bit / 44.1kHz / monaural.
Input terminal: microphone input terminal (3.5mm mini).
Output terminal: headphone / line output terminal (3.5mm stereo mini / switching at switch on the body).
Corresponding API: EAX 1.0 / 2.0 / EAX ADVANCED HD / 4.0 / 5.0, Open AL.

Check Stock

Magewell USB Capture DVI Plus (DVI, VGA, HDMI Composite, and Component )

Video Input: DVI, HDMI, Component, Composite, and CVBS.
Audio Input: HDMI Embedded and Analog via 3.5mm Line-in.
Analog audio (3.5mm Line out): Computer Audio Mix, HDMI Audio.

Check Stock

SAIZHUO BNC to HDMI Video Converter Box,BNC Adapter with Audio for Security Cameras DVRs Supports 720P/1080P Output

Covert BNC analog signals to HDMI signals.With audio port to input audiable signals. It only work for ANALOG CAMERA. It can't convert cable TV signal, can't convert digital camera or AHD/TVI/CVI camera, ONLY FOR ANALOG CAMERA. Before you purchase it, please check your device is an analog camera..
Support and automatically detect input signal in PAL/NTSC_M/NTSC4.43/SECAM/PAL-M/PAL-N format, Plug and Play.
HDMI output resolution:[email protected]/60Hz,[email protected]/60Hz.
HDMI1.3 and HDCP1.2.The resolution can reach up to 1920*1080 on LED LCTV..
Adopt a New Generation of Low-power-consumption Digital Chip, allowing 24-hour uninterrupted and stable work,low heat releasing.
3D Compensation Technology: Motion Optimization, Color Optimization and Digital Noise Reduction.

Check Stock

Wiistar Toslink Switch 3×1 Digital Optical Audio Switch 3×1 with Analog RCA and 3.5mm Support 5.1CH 5.1CH/ LPCM2.0/ DTS

Supports 1x TOSLINK output, L/R analog audio output and 3.5mm headphone output.
Built with 24bit DSP and 96KHZ/24bit DAC for super-fast hardware decoding.
TOSLINK input & output ports support all optical audio formats: AC3, DTS, THX, HDCD, PCM etc..
Automatically identifies input digital audio format and outputs stereo analog audio.
Dual-function button for input selection and power on/off the unit: push to switch input.
push & hold for 3 seconds to power off the switcher.

Check Stock