Top American Made Bench Vise Reviews

Work Bench Vise with 2 Packs Magnetic Vise Jaw Pads, Metal Table Vise with Swivel Base and Anvil, Heavy Duty Bench Vice for Home Workbench Woodworking Tool, 4.5 Inches, Blue

4.5 Inches Bench Vise Set: the package includes 1 piece blue bench vise and 2 pieces of magnetic vise pads, ready to install and use, no need to spend time looking for the right accessories.
Proper Size: machinist bench vise measures approx. 4.5 inches wide, opening size is up to 4.5 inches, magnetic vise pads measure about 4.5 inches long, matching size for simple operation and use.
Multi Functional Uses: our small bench vises are suitable for small parts processing and watch repair, such as woodworking, metalworking, sawing woodworking, drilling and bonding auxiliary installation.
The magnetic vise pad features a non slip design on the back, which is magnetic and difficult to separate when using.
Convenient to Use: the swivel vise is a lightweight tool that requires very little effort to get the job done and can be easily secured to the workbench for more convenience in your daily work.
Sturdy and Firm: the vice clamp adopts aluminum alloy material, and the magnetic vise pad is made of silicone and magnet, featuring a smooth surface and clear detail texture, which can apply for a long term use.

Check Stock

FRICTIONWORKS Vise Jaws. Made In USA Pro Grade SH80 Hard Non-Scratch Polymer. 4 Inch Magnetic Bench Vise Covers. N48 Magnets. Fits 3 4 5 Inch Vises and Blocks

MADE IN USA – The bench vise jaw re-imagined from the ground up and built to a higher standard in the USA. New design innovations unique to Frictionworks non-marring soft jaws and a limited lifetime warranty..
SUPERIOR HOLD – 8 N48 spec Neodymium rare earth magnets force rated at 7 lbs each. We have tried other vice jaws and by far the strongest magnetic vise jaw pull force is with Frictionworks vise soft jaws. The only vice jaw covers with listed specs and the magnet strength you need to keep the protective jaws solidly on your table vise, jaw horse, drill press vise, swivel vise, vise clamps, or heavy duty bench vise..
EXCLUSIVE MAGNET RETENTION SYSTEM – The innovative internal bracket system in our soft jaws secures the magnets to the vise jaw caps with a stainless bolt and is then overmolded into the vice jaw pads, solving the biggest failure point of all soft jaw pads for metal vises leading to the toughest vise jaws made..
ENHANCED MATERIAL – Our proprietary fiber-reinforced polymer composite, shore hardness 80-D, provides an incredibly tough jaw face and works great and is recommended if you really want to clamp down hard. Use for gunsmithing, woodworking, jewelry working, , muzzle device installation, 80/20 Extrusions, plumbing, maching,....

Check Stock

Bench Vise, Portable Work Bench Clamp Vise with Tilts Rotate 360°, 3" Home Table Vise Clamp-On for Woodworking, Drilling, Sawing, Jewelry Making

【Universal Table Vise】This 3-inch universal bench vise has a jaw width of 3 inches/79mm and an opening of 2 inches/51mm. Clamps to surfaces up to 2 inches thick..
【Sturdy Material】The portable bench vise is made of heavy-duty aluminum, this table vise offers incredible strength for gripping objects with ultra durability..
【Multifunctional Use】The adjustable vise is suitable for woodworking, jewelry, hobby, model making, electronics and other fields to fix small parts..
【Rotatable Design】Universal bench vise head rotates 360 degrees and tilts 45 degrees to hold securely at any angle..
【Easy to Install】The oval base can be easily and quickly mounted on the desk without any tools..

Check Stock

PONY Bench Vise 5 Heavy-Duty Utility Combination Pipe Home Vise Swivel Base Bench for Woodworking One-Pair Vise Jaw Pad Included

Multi-Jaw Function: This Multi-Jaw is applicable for clamping flat material, pipe and tube. Anti-slipping, avoid scratches and damages to items that....
Strong Iron Construction: The 5" bench vise features with a solid gray iron construction, more durable and harder than others bench vise that made of....
Stable Bench Vise: It is easy to install on your bench, simple and features with 4 fixed mounting tabs to help secure the bench vise on the table.....
Swivel Feature: 360 degree swivel design. It also features a swivel base, and allows an ever greater degree of accuracy while you are working with a....
Large Capacity: Anvil Area: 2-3/4 inch * 2-3/4 inch, Throat Depth: 3-1/2 inch, Jaw Opening: 4 inch, Jaw Width: 5 inch. Reach up to 3968 lbs. of....

Check Stock

COGNATIVE 5-Inch Heavy Duty Bench Vise Ductile Iron Bench Vise 360° Multi-Purpose Bench Vise with Anvil, Clamp force 4000KG, Blue

Durability and Sturdy -- our bench vise is made from high-strength Ductile iron 60,000 PSI, Blue fine powder coated body, zinc plated spare parts for long time use.
Ductile Iron body for stronger Clamping Force: 4000kg(8800lbs).
Specification -- Jaw width: 125mm(5"), Opening:125mm(5"), Throat Depth:67mm(2-5/8").
Applicable Scene -- This 5" heavy-duty professional bench vise is suitable for use in the workshop, great for woodworkers, fitters, etc., and this bench vise can hold wood, aluminum alloy, steel, plastic and other materials.
Easy Using -- There are straight scale and round scale on our ductile iron bench vise body for more precise positioning works, easy mounting on the bench with 360-degree swivel base.
Customer Service -- We are committed to providing customers with satisfactory products and services. If you have any questions about the products, please contact us, and we will reply to you as soon as possible.

Check Stock

Yost Vises M10WW Rapid Action Woodworking Vise | Quick Release Lever for Quick Adjustments | 10 Inch Jaw Width | Made with Heavy-Duty Cast Iron | Blue

...vise turn the vise handle counterclockwise. This will move the front jaw away from the stationary jaw to close turn the vise handle counterclockwise. To use the quick release feature of this vise, move the lever toward the vise handle. This will disengage the nut and allow you to quickly open or close the vise. The bench dog can be moved in position by loosening the finger bolt on the front of the vise..
HOW TO USE: To open the vise turn the vise handle counterclockwise. This will move the front jaw away from the stationary jaw to close turn the vise handle counterclockwise. To use the quick release feature of this vise, move the lever toward the vise handle. This will disengage the nut and allow you to quickly open or close the vise. The bench dog can be moved in position by loosening the finger bolt on the front of the vise..
YOST VISES QUALITY: Every Yost Vises tool is engineered to have high standards of quality, strength, and durability. We value quality over quantity and manufacture products that are safe and easy to use. We offer lifetime tech support to back our quality guarantee..

Check Stock

37 Pieces Hand Drill Tool Set Include Pin Vise Hand Drill with Miniature Drill Micro Mini Twist Drill Bit and Bench Vice for Craft Carving Resin Keychain Jewelry Making(0.3-1.2 mm PCB Drill)

Pin vise: made of quality aluminum alloy, durable and firm, adopt 3 claws chuck and 0.3 - 3.4 mm range of adjustable clamp which is sturdy and convenient for you to operate, its tail can be rotated, easy for you to use.
Bench vise: made of aluminum alloy and plastic, its light weight and small size make it suitable for you to hold and carry, designed with 4 plastic clips for clamping square, round and irregular objects of 0 - 57 mm size.
Twist drills and tiny drills: the drill bits are lightweight, won't take up extra spaces, can be applied for handling wood, plastic, rubber, PVC, walnut, model, bone, angle, amber, olive, fiberglass, and other materials.
Fit dimension: the pin vise is approx. 3.54 x 0.6 inches/ 9 x 1.4 cm, bench vise is approx. 4.3 x 2.4 x 1.4 inches/ 11 x 6.1 x 3.5 cm, can be appropriate for you to put in your bag or pocket.
Package content: comes with 1 x pin vise, 10 x PCB mini drills, 1 x bench vise and 25 x twist drills in 17 different sizes, sufficient quantity and adequate styles for you to carve your favored craft or DIY sculpture.

Check Stock

Murray Mallee 10 Pack Anchor Wire Vise Grape Trellis Kit - 8,9,10,11 Gauge Wire One Way Trellis Vise with 20 Screws

...vise turn the vise handle counterclockwise. This will move the front jaw away from the stationary jaw to close turn the vise handle counterclockwise. To use the quick release feature of this vise, move the lever toward the vise handle. This will disengage the nut and allow you to quickly open or close the vise. The bench dog can be moved in position by loosening the finger bolt on the front of the vise..
HOW TO USE: To open the vise turn the vise handle counterclockwise. This will move the front jaw away from the stationary jaw to close turn the vise handle counterclockwise. To use the quick release feature of this vise, move the lever toward the vise handle. This will disengage the nut and allow you to quickly open or close the vise. The bench dog can be moved in position by loosening the finger bolt on the front of the vise..
YOST VISES QUALITY: Every Yost Vises tool is engineered to have high standards of quality, strength, and durability. We value quality over quantity and manufacture products that are safe and easy to use. We offer lifetime tech support to back our quality guarantee..
SAFETY INFORMATION: Misuse of vises can cause severe injury to your eyes, hands and or other body parts. Vises must be set up and used properly. Before setup and use,....

Check Stock

Bench Vise 3' Cross Slide Vise Flat Vise Bench clamp Drill Press Vise Clamp Metal Milling Vise Cross Sliding Vise Benchtop Vise

【Size】Maximum jaw is 2.73in, that is 80mm, and vise specification is 3in, which is very convenient.The handwheel has 0.1 mm increments marked by the machine for maximum accuracy. X direction adjustment is 80 mm. Y direction adjustment is 67mm..
【Industrial Strength】With durable high-density aluminum alloy structure, the bench vise is very durable and sturdy.With high-strength accuracy screw, the bench vise is not easy to slip or deform..
【Hand Tool with Rotating Handle 】2 rotatable handles can adjust vise front and back, bolt fixing slot can be fixed..
【Silicone Protection】The gripper is equipped with a removable silicone pad, which can better protect the workpiece during operation..
【Easy to Use】The vise can be used with drill stand and bench drill, etc. Vise is suitable for woodworking and metal processing..

Check Stock

Forward CR40A-4.5In Bench Vise 210 Degrees Swivel Base Heavy Duty with Anvil 4 1/2

Jaw width:114.3mm(4.5"), Opening: 127mm(5"), Throat Depth: 66mm(2.6"), Clamping Force: 6613lb(3000kg).
More Durable and Sturdy: Material updated, all made from high strength ductile iron, PSI 60,000, bench vise can withstand a tough environment.
Multifunctional: Mounting vise on the workbench, then you could do the work of grinding, cutting, etc. Tapping work can also be done on the anvil of the bench vise. Pipe jaw can clamp the round workpiece.
More flexible: with 210 degree rotating base, large anvil and corrosion resistant handle.
Perfect Dual-Purpose Vises: This 4.5" vise is suitable for both industrial and DIY home use.

Check Stock

COGNATIVE 6 Heavy-Duty Bench Vise Ductile Iron Bench Vise 6 Inch 360° Swivel Bench Vise with Anvil Blue

Durability and Sturdy -- our bench vise is made from high-strength Ductile iron 60,000 PSI, Blue fine powder coated body, zinc plated spare parts for....
Specification -- Jaw width: 150mm(6"), Jaw Opening:155mm(6.1"),Throat Depth:87mm(3.4").
Applicable Scene -- This 6" heavy-duty professional bench vise is suitable for use in the workshop, great for woodworkers, fitters, etc., and this....
Easy Using -- There are straight scale and round scale on our ductile iron bench vise body for more precise positioning works, easy mounting on the....
Customer Service -- We are committed to providing customers with satisfactory products and services. If you have any questions about the products,....

Check Stock

Sunluway-Three-Axis Blade Light Duty Workshop Vise Tool, with 360-degree Swivel Base for Home or Industrial Craftsmen (Blue)

Bench Vise Size: Max opening jaw width: 2.4 inch/6.10 cm, Jaw length: 0.75 inch/1.905 cm , Throat Depth: 8.43 inch/21.4cm,The original Sunluway Vise suitable for hobbies, small home repairs and work bench environments.
360-Degree Easy Positioning: 360-Degree Swivel base allows rotating the vise for versatility, Provides 360-degree rotation in 2 directions of left and right and 1 direction of 180-degree rotation in front and back through 2 knobs. The jaws use high-quality plastic, holding your blade firmly in place, and performing detailed grinding, even if it is mirror polished, it will not be scratched. Even if you are left-handed. you can rotate the vise to the position that suits your work.
High-Quality Aluminum alloy: Made of strong Aluminum alloy, electroplate blue coat finish, adopts quenching and re-fire technology to increase its hardness and strength. This bench vise presents your with rugged use and longer life span, which much gives you an excellent working experience..
Safe & Secure Work: It can be easily fixed on the table by two bolts on the working leg. That makes it firmly in place when the work demands securely and precisely hold Knives.This vise tool is ideal for securely holding blade, so you can focus on the task at hand and to incre....

Check Stock

Housolution Bench Vise 4 Inch, 360°Swivel Base Bench Clamp with 100mm Vise Jaw, Home Vise Clamp-On Vise Repair Tool Work Bench Vice for Cutting Conduit, Drilling, Metalworking - Black & Blue

【Universal 4 Inch Bench Vise】: Maximum opening of jaw is up to 3.5inch/9cm, jaw length 4inch/10cm, throat depth 2inch/5cm, clamping force: 10KN.
this bench vise fits most workbench, and kinds of thickness of tables. 0.8cm/0.31inch thickened jaw provides long-term durability and heavyduty gripping..
【Heavy Duty Casting】: Made of high strength ductile iron and chrome-plated spindle and nuts, durable for long-term use and reliable to grip. The jaw adopts quenching and re-fire technology to increase its hardness and strength. Non-slip textured surface increases the grip force of jaw, which firmly holds the material, save time and effort when you work..
【360 Degree Swivel Base with Dual Locking Nuts】: Built in 360 dergree swivel base, perfect for a wide range of clamping angles. Even if you are a left-hander, you can rotate the vise to the position that suits your work. The dual locking nuts helps to clamp the work piece properly..
【Magnetic Vise Jaw Pads with Multi Grooves】: Packaged with 100mm rubber vise jaw covers, can be used on any metal vise for holding wood, metal, plastic, tubing, threaded items, safely protecting flat or round product. Provide three kinds of angle for clamping items: 60°, horizontal angle, vertical angle. Please re....

Check Stock