Top Aluminum nickel Reviews

FABER® TP-59 AGED NICKEL PLATED LIGHTWEIGHT ALUMINUM STOP TAILPIECE for ALL GIBSON, EPIPHONE and ALL OTHER GUITARS USING A STANDARD STOP TAILPIECE

  • Aged Nickel Plated, for all GIBSON, EPIPHONE and ALL GUITARS using a STANDARD STOP TAILPIECE.
  • 100% SUPER Lightweight Aluminum! Replace the TONE-ROBBING zinc tailpiece on your guitar!.
  • Combine with FABER TONE-LOCK STUDS & SPACERS to make your guitar SUSTAIN BETTER!.
  • AGED NICKEL PLATED! Gloss Nickel Plated also available here on Amazon. Gloss Gold and Aged Gold available..
Check Stock

RADA Wire Stainless Steel Kitchen Whisk with Brushed Aluminum 9-3/8 Inches Pack of 2

  • ...ches all corners and bottoms of pans easily so you know you will have perfectly blended recipes. The spring and shaft on the wire whisk are made from 300 series high nickel stainless steel. The spring features a unique design so that food does not stick to it. The handle is made from permanently cast silver brushed aluminum with a satin finish. This whisk measures 9-3/8 in and is suitable for both professional and home cooks. Handwashing is recommended. Pack of 2..
  • BETTER COOKING WHISK – Where your standard whisk fails, this wire whisk succeeds. Reach all corners and bottoms of pans easily. Mix batters, gelatin, gravies, sauces, and more! Pack of 2..
  • STAINLESS STEEL SPRING – The spring and shaft on the wire whisk are made from 300 series high nickel stainless steel. The spring is shaped so that food does not stick to it..
  • BRUSHED ALUMINUM HANDLE - The handle on the wire whisk is made from permanently cast silver brushed aluminum with a satin finish. This kitchen utensil should not be washed in the dishwasher. Handwashing is recommended..
  • AMERICAN MADE UTENSIL – Rada Mfg. Co. is located in Waverly, Iowa and has been manufacturing cutlery in the USA since 1948. Our mission is all about “providing our customers the best value of kitchen knives ....
Check Stock

1.5\ 5/16-18 T-Bolt, 5 Pack

  • M6x20mm Hammer Head Bolt T Screw size: 15 x 10 x 6mm/0.59" x 0.39" x0.24"(LWT).
  • Metal Type:nickel plated , Carbon Steel.
  • 2020 Series European standard Aluminum Profile Accessories widely used for building 3D printers, 3D carvers, CNC routers, CNC laser cutters, CNC plasma cutters, robotics projects, machine guards, workstations, etc.
  • T-shaped screws are used for aluminum profile design, suitable for standard 6mm T-slot 20 European standard aluminum profiles.
Check Stock

Craftmade MND54BNK3 Mondo Outdoor Metal Blade Ceiling Fan with Remote 54' Industrial Fan for Patio, Brushed Nickel

  • DIMENSIONS: This three blade ceiling fan hangs 15.51″ from the ceiling to the bottom of the fan with a 6″ downrod (included), 13.51″ from the ceiling to the bottom of the blades and a 5.11″ canopy base diameter..
  • CONTROL: This nickel ceiling fan is built with a quiet six speed DC reversible motor. The aluminum blades are controlled with a six speed handheld remote and wall control (included) that provides the reverse button at your reach in order to control the direction of the airflow..
  • MATERIAL: This Industrial ceiling fan was designed with premium materials that includes a silicon steel body that was built to last, three silver aluminum blades with a brushed polished nickel finish along with stainless steel accessories. This UL listed ceiling fan is rated for indoor and damp locations..
  • SPECIFICATIONS: This ceiling fan with remote has a blade sweep diameter of 54″ and a blade pitch of 13 degrees that produces maximum airflow of 5,424 when on high speed. This nickel ceiling fan includes a quiet six speed DC motor that measures 125x30mm..
  • INSTALLATIONS: This ceiling fan can be installed on a flat or vaulted ceiling with no greater than a 25 degree angle. This fan is UL damp rated for indoor and outdoor use and is meant to be hardwired. This ce....
Check Stock

Montex 6 Gear Handheld Spot Welder 7500Mah Rechargeable Spot Welding Machine with 16 inch Pens For 18650 Battery Plate Spot Welder With Type-C Rechargeable and 2 Pack 16FT Nickel Sheet

  • 【Top Quality】Montex Mini Spot Welder Uses Aluminum Alloy For The Shell (Unlike Other Plastic Ones) With Antioxidant Surface Process, Which Ensures A Longer Product Life Than Other Brands. Safety Design: Power Off When Machine Temperature Exceeds 140 °F.
  • 【6 Gear Adjustable Power Levels】We Offer Auto Mode And Manual Mode, When It’s In Muanal Mode, You Can Choose From 1 To 6. The Highest Level Can Generates A High Temperature Of More Than 2000 Degrees At The Welding Point To Make The Nickel Sheet Weld Firmly.
  • 【Wide Application】Suitable For 18650 And Other Cylindrical Lithium Batteries, Nickel Metal Hydride Batteries, Cadmium Nickel Batteries Can Be Welded Firmly.
  • 【Long Usage Hour & Fast Charging】Montex Spot Welder Contains 7500Mah High-Effciency Lithium Batteries And We Offer Type-C Fast Charging. After Being Fully Charged, Thousands Of Points Can Be Continuously Welded On A 0.1-0.15mm Nickel Sheet.
  • 【Bonus Gifts】We Offer 16 Inch High Quality Spot Welding Pens.
Check Stock

2 - Pack Tippmann Basics 47 / 48ci 3k Aluminum HPA / Nitro / Compressed Air Tank

  • Proven regulator providing stability and consistency.
  • Nickel plated bonnet for increased durability.
Check Stock

Better Living Products 17900 Extendable Squeegee for Showers Silver Chrome

  • Better Living Products 17906 ALTO Rust Proof Aluminum Extendable Shower Squeegee Polished Nickel.
  • Ergonomically curved handle extends squeegee to 18-inches.
  • Strong, metal reinforced rubber blade holder.
Check Stock

National Hardware N325-431 V1996 Kickplate in Satin Nickel

  • Authorized Replacement for Stanley Hardware Stock #N325-431.
  • Plastic cover protects finish during installation.
Check Stock

MSD 85827: Distributor, Ford V8, 302

  • Pre-installed Bronze Gear for aftermarket billet roller camshafts.
  • Gear machined from AMPCO 45 aluminum bronze containing 5% Nickel.
  • CNC machined billet 6061-T6 aluminum housing.
  • Maintenance-free magnetic pickup and precision reluctor create stable trigger signals throughout the rpm range.
  • Must be used with an MSD Ignition Control.
Check Stock

Campagnolo Chorus 11 Cassette 11 Speed, 12x29

Check Stock

David Burke Elements Heavy Gauge Stainless Steel Stockpot 8-qt, 12-qt, 16-qt, 20-qt (16 QUART)

  • ... cookware does not apply any coating, and is free of health hazard. 3-Ply base & heat surround features allow for even heat conductivity and distribution to eliminate hot spots.
  • thus achieve natural stick resistance without toxic PFOA and PTFE..
  • ADDITIONAL FEATURES - 3-Ply construction in the base (one layer of pure aluminum core sandwiched between two stainless steel layers) with extra thickness (7.6MM) ensures optimal thermal absorption and transmission, thus faster cooking, better nutrition, and more energy saving - Solid riveted handles stay cool on the stovetop - Tight-fitting lid circulates heat & moisture, preserving flavors & nutrients - Compatible with gas, induction, ceramic and halogen stovetops.
Check Stock

HOMICHEF Stock Pot 8 Quart with Lid Nickel Free Stainless Steel - Mirror Polished Stockpot 8 Quart with Lid - HEALTHY COOKWARE Stockpots 8 Quart - Soup Pot 8 Qt Cooking Pot Induction Pot With Lid

  • ...am vent, and ergonomical steel handles - These pots are beautifully engineered by HOMICHEF's own in house manufacturing facilities at the world top quality - Compatible with gas, induction, ceramic, glass and halogen stovetops.
  • ADDITIONAL FEATURES - 3-Ply base construction (one layer of pure aluminum core sandwiched between two stainless steel layers) with extra base thickness (6MM) eliminates warping and hotspots effectively.
  • ensures optimal thermal absorption & transmission. - Solid riveted handles stay cool on the stovetop - Tight-fitting lid circulates heat & moisture, preserving flavors & nutrients. - Advanced engineering & nickel free stainless steel provide faster cooking, better nutrition & more energy saving..
  • DEVOTED CUSTOMER SERVICE - Genuine HOMICHEF stainless steel cookware products, certified by ISO9001, BSCI, etc. - TRADEMARK filed in U.S.A. - In business since 1998 - This product comes with 1-MONTH full refund trial period & LIFE-TIME Customer Service - You can always come to us for discounted parts, cooking consultations, and customer service at HOMICHEF store on Amazon..
Check Stock

KOOTANS 20-Pack 90 Degree Angle Brackets Interior Joint Corner Bracket for European Standard 2020 Series T Slot 6mm Aluminum Extrusion Profile with Screws and Wrench

  • Package include: 20pcs L joint and 40pcs screws and wrench.
  • 2020 Series Aluminum Profile Connector widely used for building industrial aluminum frame structures, 3D printers, CNC Routers, CNC laser cutters,....
  • Fit European standard 2020 series Aluminum extrusion.
  • Rigid connection, used to connect pieces of 20mm aluminum extrusion at a 90 degree angle.
Check Stock