Top Aluminum Wire Drawing Machine Reviews

Amico MTS-165, 165 Amp MIG/Flux Cored Wire, TIG Torch, Stick Arc DC Inverter Welder 3-IN-1 Combo Welding, 110/230V Dual Voltage.

  • MTS-165 capable of welding up to 1/4" aluminum, alloy, mild steel, weld steel, stainless steel, copper and cast Iron. It can work well with aluminum wire, solid wire and flux cord wire, it also has the TIG Torch and STICK function..
  • Advanced IGBT technology, featured wave-form control system, perfect waveform of volt and amp during, short circuits and arc burning cycles..
  • Synergic controlled, very clear wire melting droplet transfer, very few spatters. fast, precise, clean arc ignition and arc ending..
  • Using high quality wire feeding machine(iron) to ensure smooth wire feed, especially when using aluminum wire welding aluminum, with 2T/4T torch control. automatic control gas solenoid valve has been installed inside the machine..
  • Automatic compensation for voltage fluctuation, over-voltage protection, under voltage protection, over current protection, over load protection, automatic temperature control, fan dormancy, steeples amperage control..
Check Stock

TOOLIOM Aluminum MIG Welder 250A 110V/220V Dual Voltage MIG/Lift TIG/Stick 3 in 1 Welding Machine

  • Multi-functions in one machine, suitable for Gas MIG/Flux MIG/Stick/ Lift TIG..
  • Can weld aluminum ,compatible with a spool gun or MIG torch with graphite wire feed tube..
  • MIG synergistic setting & MIG manual setting, good choice for both novice and professional..
  • Can be used with various welding wire, .040" solid/flux/aluminum wire,035" solid/flux wire,030"solid/flux wire,024" solid wire..
  • Dual voltage input design: Welding machine can be plugged into 110/220V dual voltage (Automatic fitting)..
Check Stock

Happybuy Manual Wire Stripping Machine 0.06-0.98 inches, Wire Stripper Machine with Hand Crank Portable, Wire Stripping Tool Aluminum Construction,for Scrap Copper Recycling

  • Hand Crank Designed: designed with hand cranks,easy to operate.Easily connects to drill for automatic wire stripping or use Handle for manual stripping.
  • Aluminum Alloy Material: Manual wire stripper with high quality lightweight construction made of durable aluminum alloy. The blades have been fully guarded to ensure complete safety.
  • Recycle Your Copper: Suitable for removing the plastic and rubber insulation from undamaged scrap wire.You can recycle your copper wire, benefit from non-insulated pure copper wire.
  • Easy to Use ,Portable & Energy Saving: There is adjustable blade and rollers on the cable wire stripping machine, smoothly and good for any shapes Cable. When you use this machine to strip the wire whose diameter smaller than 3mm, please put the wire to the small hole on bottom.
  • Wide Application: This machine is automatic and the wire range is up to 25mm，widely used in wiring harness processing, aerospace wire processing, audio and data line processing, wire recycling dismantling and other industries.
Check Stock

AmicoPower MTS-165, 165-Amp MIG MAG Lift-TIG Stick Arc Combo DC Inverter Welder, Compatible Spool Gun SPG15180

  • MTS-165 integrates the most innovative design structure and technology, featuring all the functions of every welding machine: MIG, MAG, Flux core, Lift TIG, Stick and Spool gun (which can weld aluminum). It can perfectly weld all conductive metals: aluminum, aluminum alloy, stainless steel, alloy steel, carbon steel, steel, cast iron, iron and copper.
  • all up to around 1/4 inch. The MTS-165 is the most efficient machine for every task..
  • The MTS-165 uses a high-quality wire feeder to ensure smooth and stable wire feeding. When using MIG/MAG/Flux-core welding, it is very easy to adjust the welding current and wire-feeding speed. The output is easily adjustable according to the thickness, and polarity is easily altered according to the wire type. Even beginners can complete any task efficiently and easily with this machine..
  • MTS-165 is designed with an intelligent power supply system. It can automatically detect the input voltage and easily switch between 110V and 230V. Extending the power cord by 700 feet can also resist cable attenuation and still allow the machine to work normally. It is very suitable for operations on construction sites, house maintenance, docks, and even agricultural sites..
  • MTS-165 is designed and manufactured according to the highest....
Check Stock

MTS-205 205 Amp MIG/TIG-Torch/Stick Arc Combo Welder Weld Aluminum MIG 110/230V Dual Voltage Welding New

  • MTS-205 integrates the most innovative design structure and technology, featuring all the functions of every welding machine: MIG, MAG, Flux core, Lift TIG, Stick and Spool gun (which can weld aluminum). It can perfectly weld all conductive metals: aluminum, aluminum alloy, stainless steel, alloy steel, carbon steel, steel, cast iron, iron and copper.
  • all up to around 1/2 inch. The MTS-205 is the most efficient machine for every task..
  • The MTS-205 uses a high-quality wire feeder to ensure smooth and stable wire feeding. When using MIG/MAG/Flux-core welding, it is very easy to adjust the welding current and wire-feeding speed. The output is easily adjustable according to the thickness, and polarity is easily altered according to the wire type. Even beginners can complete any task efficiently and easily with this machine..
  • MTS-205 is designed with an intelligent power supply system. It can automatically detect the input voltage and easily switch between 110V and 230V. Extending the power cord by 700 feet can also resist cable attenuation and still allow the machine to work normally. It is very suitable for operations on construction sites, house maintenance, docks, and even agricultural sites..
  • MTS-205 is designed and manufactured according to the highest....
Check Stock

AMICO MTS-185, 3-in-1 Combo 185-Amp MIG Lift-TIG Stick Arc DC Inverter Welder, Compatible Spool Gun Welding Aluminum: SPG15180.

  • MTS-185 integrates the most innovative design structure and technology, featuring all the functions of every welding machine: MIG, MAG, Flux core, Lift TIG, Stick and Spool gun (which can weld aluminum). It can perfectly weld all conductive metals: aluminum, aluminum alloy, stainless steel, alloy steel, carbon steel, steel, cast iron, iron and copper.
  • all up to around 3/8 inch. The MTS-185 is the most efficient machine for every task..
  • The MTS-185 uses a high-quality wire feeder to ensure smooth and stable wire feeding. When using MIG/MAG/Flux-core welding, it is very easy to adjust the welding current and wire-feeding speed. The output is easily adjustable according to the thickness, and polarity is easily altered according to the wire type. Even beginners can complete any task efficiently and easily with this machine..
  • MTS-185 is designed with an intelligent power supply system. It can automatically detect the input voltage and easily switch between 110V and 230V. Extending the power cord by 700 feet can also resist cable attenuation and still allow the machine to work normally. It is very suitable for operations on construction sites, house maintenance, docks, and even agricultural sites..
  • MTS-185 is designed and manufactured according to the highest....
Check Stock

AmicoPower MTS-185,Multi-function 185-Amp MIG/MAG/Flux-cored/Lift-TIG/Stick Arc DC Inverter Welder,Can weld all metals,Spool gun weld aluminum.

  • MTS-185 integrates the most innovative design structure and technology, featuring all the functions of every welding machine: MIG, MAG, Flux core, Lift TIG, Stick and Spool gun (which can weld aluminum). It can perfectly weld all conductive metals: aluminum, aluminum alloy, stainless steel, alloy steel, carbon steel, steel, cast iron, iron and copper.
  • all up to around 3/8 inch. The MTS-185 is the most efficient machine for every task..
  • The MTS-185 uses a high-quality wire feeder to ensure smooth and stable wire feeding. When using MIG/MAG/Flux-core welding, it is very easy to adjust the welding current and wire-feeding speed. The output is easily adjustable according to the thickness, and polarity is easily altered according to the wire type. Even beginners can complete any task efficiently and easily with this machine..
  • MTS-185 is designed with an intelligent power supply system. It can automatically detect the input voltage and easily switch between 110V and 230V. Extending the power cord by 700 feet can also resist cable attenuation and still allow the machine to work normally. It is very suitable for operations on construction sites, house maintenance, docks, and even agricultural sites..
  • MTS-185 is designed and manufactured according to the highest....
Check Stock

Amacupid Nylon Fibe Drawing Wheel 6 inch 5P Hardness for Bench Grinder Buffing Machine Polishing Copper Aluminum etc Aluminum Oxide Abrasive 80 Grit 1/2 inch Mandrel,1 inch Thickness

  • Application: Nylon fiber polishing wheel with 5P hardness, mainly used for electroplating and drawing of copper products, antique copper, aluminum and other metal panels. Polishing of soft materials.
  • Quality and characteristics: The nylon fiber polishing wheel is made of high-toughness and high-temperature resistant high-quality nylon fiber, selected first-class brown corundum abrasive, and compounded by special adhesive. Its mesh-like fiber structure can effectively dissipate heat, reduce dust. Fast wire drawing, clear and even and beautiful silk road.
  • Size: Nylon fiber polishing wheel diameter 6 inches/150mm, hole 1/2 (12.7mm), thickness 1 inch/25mm, density 5P, particle size 180 mesh. Please choose a suitable nylon fiber wheel according to the diameter and speed of your machine spindle.
  • Safety and precautions: Nylon fiber polishing wheels generally use a speed of 1800-2800 rpm, It is polished under high-speed rotation,Over 3500 RPM there may be a risk of rupture. Please select the nylon fiber wheel suitable for your work requirements according to the parameters in the provided instruction manual, and standardize the safe operation.
  • After sales: If you have any questions about our products, please feel free to contact us. We will try our best to solve ....
Check Stock

Mardatt 8\ 6 Function MIG Welding Pliers, Dual-Sided Gage Standard Metal Gauge Measurement and Tungsten Carbide Scriber for Metal Sheet (3 Pack)

  • ...raving procession, the scale is clear. And they will not wear out. Dual-Sided Round Wire Gauge, 0-36 American Standard (AWG) and SAE.
  • Ideal for measuring sheet, plate iron and steel, leather, wire, Bolt, screw, ect..
  • Handy Tungsten Cardie Tip Scriber：The glass scriber features a durable tungsten carbide tip and an aluminum body, which is twice as hard as steel, so it can easily handle hardened steel, stainless steel, ceramic, glass and other hard material.
  • Convenient pen design for easier and tighter holding and better control when using.
  • knurled aluminum handle provides maximum control and comfort.
  • convenient pocket-clip for keeping the etching carve tool handy..
  • Reliable and Friendly After-sale: Pls feel free contact me for any issues. Offer 12 hours quick response service for your satisfaction..
Check Stock

SENDUO Manual Wire Stripping Machine Speed 50FT/MIN Wire Stripper Machine Wire Gauge Range 0.06-1inch Portable Copper Wire Peeler Machine for Scrap Copper Wire Cable Stripping

  • 【WIDE WIRE DIAMETER】- Our wire stripping machine has two feeding panels of four different sized feed holes, allowing wires in diameter from0.06"(1.5mm) to 1" (25mm). The panel with 3 holes can be fixed accordingly, 4 mounting holes available..
  • 【BLADES ADJUSTABLE】- Blades with Thickness: 12mm(0.47") can be fast to change and Stripping Speed: About 50ft/min well performed. The adjustable blades and rollers on the cable wire stripping machine fit with all size wires with diameters from 0.06” (1.5mm) up to 0.98” (25mm)..
  • 【HAND-CRANK DRIVEN】- The wire stripper can be driven by winding the hand crank, smooth and easy to use. Also you can start a electric drill to power it for a convenient and fast working..
  • 【ALUMINUM & COMPACT】- This cable stripper has a compact and long lasting frame of aluminum alloy, lightweight with 3.8kg(8.38 lbs) to be portable and easy to use. It can be mounted easily to any bench or work station..
  • 【WIDE APPLICATION】- The wire stripper machine is widely used in wiring harness processing, aerospace wire processing, audio and data line processing, wire recycling dismantling and other industries..
Check Stock

National Hardware N221-762 2170BC Eye to Eye Turnbuckle in Zinc plated

  • Authorized Replacement for Stanley Hardware Stock #N221-762.
  • Designed for tightening or drawing together various lines and cables.
  • Hex body allows for ease of adjustment by hand or with a wrench.
Check Stock

SIGNI Abrasive Nylon Drawing Wheel Drum Burnishing Polishing Brush for wooden furniture floor polishing 120x100mm 80 Grit 1pack

  • Suitable for kinds of surface, such as flat, curved, concave, convex or irregular surface..
  • Made from Nylon Wire coated with silicon carbide, suitable for derusting , deburring and cleaning wooden floor for brushing soft annual rings on wood..
  • Can be installed to drawing machine,But Not fit porter cable restorer..
  • Great for fine wood polishing effect, long durability and high efficient performance.
Check Stock

Drill Powered Scrap Wire Stripper Machine, Portable Cable Stripper Machine, Stripping Wire #18 Gauge to 250MCM, Adjustable Without Tools (Cross Handle)

  • ...ds from the strenuous work of stripping wires..
  • Wide Application: 2 different feeding Panels. 8 different sized feed holes. Suitable for all sizes from #18 wire To 250 MCM, diameters from 0.08"(2mm) Up To 0.79"(20.1mm)..
  • Aluminum Alloy Construction: Drill Powered Wire Stripper Machine is made of Alloy Steel Blade and durable drive wheels.It remains sturdy for prolonged use..
  • Easy to Use: Quickly and easily set up the wire stripper machine to your exact needs with the Regulating Nut and 2 Thumb Screws. This is so that the pressure of the blade on the wire is just right and the blade stays in the middle of the wire during the stripping process..
  • Portable Wire Stripper Machine: This is a cable stripper that is light enough that you can easily take it anywhere to work. At the same time, the mounting holes on the base also allow you to use the included screws to fix this wire stripper on a flat surface such as a workbench, which will give the wire stripper machine better stability..
Check Stock