Top Aluminum Walk Ramp Reviews

Ruedamann 34.8\ L x 2.6\ H Wheelchair Ramp,600lbs Capacity,Bridge Threshold Ramp with Supporting Frame and Non-Slip Surface,Aluminum Ramp for Wheelchairs, Stairs,Vans, Steps

【Lightweight Design & Portable】Portable folding wheelchair ramp that make sure wheelchairs access over any stairs,steps,curbs,handicaps,doorways,etc. Aluminum alloy has high hardness, toughness and resilience, please use it with confidence. This wheelchair ramp is available for manual wheelchairs, electric wheelchairs, trolleys, rollators and two wheeled vehicles (not good for motorcycles). electric wheelchairs, trolleys, rollators and two wheeled vehicles (not good for motorcycles)..
【Good Performance】Folding threshold ramp for wheelchair design and seamless with specially designed hinges for easy storage and transport.Please do not walk on the hinge in the middle of the ramp or transfer vehicles on the hinge..
【Perfect Anti-skid 】Non-slip rubber pads placed on the back at the top of the wheelchair ramp for safety use and prevent slip from the using occasions. Stick with non-slip tape on the surface. Extended tail-plate design at both ends allows the ramp to touch the ground with a larger area, best load bearing, best skid resistance and easier to go up the ramp..
【Instructions for Use】Wheelchair ramps for home with nylon handle for indoor or outdoor use.In addition,the ramp is waterproof and skid-proof, holds up to 600 lbs (300kg).Usin....

Check Stock

Ruedamann 3'L x 28.3\ W,Holds up to 600 lbs,Wheelchair Ramp with Non-Slip Surface,Portable Aluminum Wheelchair Ramp,Folding Ramps for Wheelchairs,Home,Steps,Stairs,Handicaps,Doorways

...a little. There are bolts with this ramp. You can fix the ramp with bolts through the holes on the extension plate of the ramp to the ground to avoid moving..
【Lightweight & Portable】Lightweight portable folding wheelchair ramp that make sure wheelchairs access over any stairs,steps,curbs,handicaps,doorways,etc. Aluminum alloy has high hardness, toughness and resilience, please use it with confidence. This wheelchair ramp is available for manual wheelchairs, trolleys, rollators and two wheeled vehicles (not good for motorcycles)..
【Sturdy Hinge】The hinge of the wheelchair ramp are more durable than ordinary hinges.Folding threshold ramp design for easy storage and transport.Please do not walk or pass through vehicles on the hinge in the middle of the ramp..
【Anti-skid & Durable】The ramp surface is covered with non-slip emery film, and non-slip rubber pads placed at the top of the wheelchair ramp for safety use and prevent slip from the using occasions.Welding of each part of the ramp makes the ramp with no noise and more durable than usual ramps. Compared with other iron rivets, our products use stainless steel rivets, which are more durable and not easy to rust..
【Versatile Use】Wheelchair ramps for home with webbing handle for indoor or ....

Check Stock

Tri-fold ATV Ramps, 1500lbs Extra-Wide Aluminum Loading Ramps, Heavy-Duty Multi-Purpose Powersports Loading Ramps for Pickup Trucks, Snowmobile,Lawn Mower, Garden Tillers, Motorcycle

【EXTRA-WIDE ALUMINUM LOADING RAMPS】 Extra-Wide 54″ Multi-Purpose Aluminum Loading Ramp can handle a variety of different loads, and will not leave you limited..
【MULTI-PURPOSE LOADING RAMP】 Excellent for loading ATVs, dirt bikes, lawn tractors, snowmobiles, snow blowers, wheel barrows, garden tillers and other equipment. Maximum load capacity of 1500 lbs..
【DURABLE ALUMINIUM CONSTRUCTION】 Heavy duty, fully-welded aluminum construction. Full width top plate distributes weight evenly across tailgate.Plastic covered buttons overlap the tailgate for smooth entry. Includes safety straps to hold the ramp in place..
【TRI-FOLD SNOWMOBILE RAMP】 Features polyurethane ski guides for low-resistance loading and a cross-rung center section for optimal track grip. Folds horizontally for storage beside the snowmobile in the pickup truck bed..
【TIPS】 Always ensure loading ramps are securely fastened before loading to avoid slipping. Where possible, it is best to remove tailgates (or check their capacity) and winch your load up the ramp or walk it from the side. Always use caution when handling folding ramps near pinch points..

Check Stock

Wheelchair Ramp for Home, Portable Aluminum Wheelchair Ramp for Steps, Non-Skid Threshold Ramp for Doorways, Curbs, Foldable Mobility Scooter Ramp, 3FT

【800LBS LOAD CAPACITY】These telescopic wheelchair ramps are made from durable strong aluminum materials and can be extended to 36 inch (3FT) in length.They provide a very strong ramp that will support a total weight of 800 lbs..
【WIDER WIDTH】Has a handle like a suitcase for easy carrying. And you can take with them when visiting family. With a wider width —— 31.3 inch so caregivers and wheelchair users both can walk on the ramp directly..
【PORTABLE WHEELCHAIR RAMP】These ramps are made of aluminium and can be folded into half for storage, making them easier to carry, transport and store.When at their minimum length, they are held closed by a safety catch, which prevents them from moving during transportation and storage..
【NO-SKID SURFACE】Featured an non-skid layer that allows mobility devices to retain traction in all weather conditions. With rust-resistant anodized make our aluminum ramps more duarable..
【MAKE PASS EASIER】Easy to fold or take apart for storage, whether you’re looking to bridge an entryway, curb, set of steps, or van door, a temporary wheelchair ramp can get you there. They are a convenient solution for walkers, scooters, wheelchairs, crutches, strollers, and more. This ramp offers accessibility and peace of min....

Check Stock

Wheelchair Ramps for Steps, 5FT Portable Aluminum Wheelchair Ramp for Home, Non-Skid Threshold Ramp for Doorways, Curbs, Stairs, Foldable Mobility Scooter Ramp

...d, but it does not affect normal use. If you want to return the product, you need to pay the shipping fee yourself. In order to avoid unnecessary losses, please confirm before buying..
【800LBS LOAD CAPACITY】These telescopic wheelchair ramps are made from durable strong aluminum materials and can be extended to 60 inch (5FT) in length.They provide a very strong ramp that will support a total weight of 800 lbs..
【WIDER WIDTH】Has a handle like a suitcase for easy carrying. And you can take with them when visiting family. With a wider width —— 31.3 inch so caregivers and wheelchair users both can walk on the ramp directly..
【PORTABLE WHEELCHAIR RAMP】These ramps are made of aluminium and can be folded into half for storage, making them easier to carry, transport and store.When at their minimum length, they are held closed by a safety catch, which prevents them from moving during transportation and storage..
【NO-SKID SURFACE】Featured an non-skid layer that allows mobility devices to retain traction in all weather conditions. With rust-resistant anodized make our alumi....

Check Stock

Ruedamann 2'L x 26.6' W,Holds up to 600 lbs,Wheelchair Ramp with Non-Slip Surface,Portable Aluminum Wheelchair Ramp,Folding Ramps for Wheelchairs,Home,Steps,Stairs,Handicaps,Doorways

...the other side will be lifted up a little because only one side holds the weight. In this case, please ensure that the weight does not exceed 300 lbs(150kg)..
【Lightweight & Portable】Lightweight portable folding wheelchair ramp that make sure wheelchairs access over any stairs,steps,curbs,handicaps,doorways,etc. Aluminum material is relatively soft, the ramp may bend slightly when supporting heavy weight, but its resilience is high and will not affect the use, please rest assured. This wheelchair ramp is available for manual wheelchairs, trolleys, rollators and two wheeled vehicles. NOTE: not suitable for power wheelchairs wider than 26.6" (68cm)..
【Sturdy Hinge】The hinge of the wheelchair ramp are more durable than ordinary hinges.Folding threshold ramp design for easy storage and transport.Please do not walk or pass through vehicles on the hinge in the middle of the ramp..
【Anti-skid & Durable】The ramp surface is covered with non-slip emery film, and non-slip rubber pads placed at the top of the wheelchair ramp for safety use and prevent slip from the using occasions.Welding of each part of the ramp makes the ramp with no noise and more durable than usual ramps. Compared with other iron rivets, our products use stainless steel rivets, whic....

Check Stock

Loading Ramps for Pickup Trucks, 600 LBS Aluminum Motorcycle Ramps, Portable Tri-fold Ramp fo Dirt Bike, Pickup Trucks, SUV, Garden Tillers, Van, Lawn Mower, 78.3' * 12'

【EASY TO CARRY】 The Tri-Fold Ramp is built with durable aluminum construction. It’s space saver design allows it to store into standard truck bed. Foldable for easy carrying and adjustable safety strap for secure loading..
【WIDE APPLICATION】 Maximum load capacity of 600 lbs/PC 1200lbs/Pair. It works well for scooters, dirt bikes, bicycles, or motorcycles or whatever else you need to load into your truck bed.
Double it to work for pickups, small tractors, snow blowers,push mowers, garden tillers and appliances, golf carts, etc..
【STRONG TRACTION 】 The perforated board on the loading surface provides excellent traction, even in wet or muddy conditions for safe and secure loading..
【DURABLE ALUMINIUM CONSTRUCTION】 Aluminum construction for long-lasting durability and strength. Plastic covered buttons overlap the tailgate for smooth entry. Includes safety straps to hold the ramp in place..
【TIPS】 Always ensure loading ramps are securely fastened before loading to avoid slipping. Where possible, it is best to remove tailgates (or check their capacity) and winch your load up the ramp or walk it from the side. Always use caution when handling folding ramps near pinch points..

Check Stock

Titan Ramps Low Profile Aluminum Car Ramps Pair 3,000 LB Capacity for Oil Change

LIGHTWEIGHT AND DURABLE ALUMINUM CONSTRUCTION: Our low profile car ramps are built entirely from aluminum, making it strong and at the same time lightweight. This aluminum design also protects the ramps from rust and corrosion, so your ramp will always continue to look and perform like new..
SPECIALLY DESIGNED FOR LOW PROFILE VEHICLES: The length of 66" with the ramp height of 9.5" provide a slope of 11.5 degrees, making it ideal for your vehicles with low ground clearance, including lowered trucks and cars with suspension kits and ground effects..
ALL WELDED DESIGN WITH NO ASSEMBLY: These ramps come fully assembled with all of the aluminum body seams fully welded. There are supports the help reinforce the ramp to prevent any movement when loading your vehicle. Simply remove the ramps from the box and you are ready to put it to use..
1500 POUND CAPACITY PER RAMP: These lightweight aluminum vehicle ramps have reinforcements that provide stability and structural support, allowing you to load your truck or car with peace of mind. The capacity of this ramp is 1,500 LB per axle with a combined capacity of 3,000 LB..
RAMP DIMENSIONS: This pair of aluminum car ramps weighs 55 LB combined. The overall length is 66" and has a ramp length of 50.

Check Stock

Ruedamann 6'L×8.3\ W Adjustable Aluminum Wheelchair Ramp,600lbs Capacity,Portable Telescoping Non-Skid Surface Wheelchair Ramp for Home, Stairs, Steps

【Anti-slip surface】The wheelchair ramp is lightweight and portable threshold ramp, made from non-rust, slip-proof and water-resistant aluminum.Surface of the wheelchair ramp is pasted with anti-slip film which is with high traction and anti-skid ability..
【Adjustable length】All locks in the wheelchair ramp are made of stainless steel. The bending degree of the locks in the ramp can be adjusted by using tools.You can use the locks to make the wheelchair ramp at any length you want..
【Durable Aluminum】Durable aluminum construction holds up to 600 lb capacity. Aluminum material is relatively soft, the ramp may bend slightly when supporting heavy weight, but its resilience is high and will not affect the use, please rest assured. Perfectly used for manual wheelchairs. Do not use motorcycles or power wheelchairs on this ramp..
【Versatile use】This wheelchair ramp is made for indoor or outdoor steps,stairs,curbs,handicaps,doorways and etc. Non-slip rubber pads placed on the back at the top of the wheelchair ramp for safety use and prevent slip from the using occasions. If the plastic handles are damaged due to transportation, please contact us for mailing..
【Specifications】This ramp is sold in pair.Either of these wheelchair ramps are 6' lon....

Check Stock

Titan Ramps Heavy Duty Aluminum Semi Truck Riser Ramp 20,000 LB Capacity

HEAVY DUTY DURABLE ALUMINUM CONSTRUCTION: Our semitruck riser ramps are built entirely from aluminum, making it strong and at the same time lightweight. This aluminum design also protects the ramps from rust and corrosion, so your ramp will always continue to look and perform like new..
SPECIALLY DESIGNED FOR LARGE TRUCKS: The length of the ramp is 43in to the top platform that is 20.5in long. The HD ramp will raise your vehicle 9in from the ground, providing plenty of room for servicing the under carriage and routine maintenance such changing the oil and replacing filters and plugs..
ALL WELDED DESIGN WITH NO ASSEMBLY: These ramps come fully assembled with all of the aluminum body seams fully welded. There are supports the help reinforce the truck ramp to prevent any movement when loading your vehicle. Simply remove the ramp from the box and you are ready to put it to use..
10 TON CAPACITY PER PAIR: These lightweight aluminum vehicle ramps have reinforcements that provide stability and structural support, allowing you to load your truck or tractor trailer with peace of mind. The combined capacity of these ramps is 20,000 LB..
RAMP DIMENSIONS: This pair of aluminum truck riser ramps weighs 90 LB combined. The overall length is 63.75in, the top platform i....

Check Stock

7.5ft Folding Aluminum Ramp 1 Pc of Loading Ramp for Trucks 750LBS Capacity Truck Ramp for Loading Motorcycles Dirt Bikes Scooters

High Quality Folding Aluminum Ramp: TaiH Leo loading ramp is made of high-strength aluminum alloy, the sturdy aluminum structure can withstand 750LBS....
Multifunctional Loading Ramp: 89.8x12" (each) when unfolded for use and 45.7x12" (each) when folded. This trailer ramp can carry scooters, bicycles,....
Attractive Design: High quality smooth aluminum coating, make people comfortable appearance design, with fixed pull rope to effectively prevent the....
Folding and Portable: Foldable shed ramp reduce occupied space and facilitate storage. It is more convenient to use outside and every truck should....
Quality Assurance: Thirty-day warranty (if damaged by non-human means).If the two wheeler ramp are not used as you expect, you can always contact us.....

Check Stock

BISupply Aluminum Ramp Kit – 8in Truck Ramp Brackets and Rubber Feet, Tailgate Ramp Kit Ramp Plate Kit

BUILD YOUR OWN RAMPS: Use the BISupply Aluminum Truck Ramps Loading Ramp Kit to turn simple 2 by 8-inch (5.1 by 20.3 cm) boards into sturdy, all-purpose utility trailer ramps.
Each package of ramp parts includes 2 aluminum loading ramps, 2 rubber anti-slip loading ramp ends, and installation hardware to assist in constructing a total of (2) ramps.
2-inch by 8-inch ramp boards required (not included).
Kit weighs just under 6 pounds for easy storage, installation, and handling.
DURABLE ALUMINUM RAMP PLATES: Constructed of quality aluminum material ensures that these load ramps are designed for maximum strength and durability.
Loading ramp brackets provide reliable stability and resistance to rust and corrosion.
Features a 1.37-inch (3.5 cm) board insert space, non-skid threads on the 5 by 7.25-inch (12.7 by 18.4 cm) faceplate, and pre-screwed bolt holes.
ANTI-SLIP FEET: Forget about cutting angles to make your ramps sit flat, simply slide one of these 4 by 7.5-inch (10.2 by 19.1 cm) rubber ramp ends for boards on the end of the board and you are ready to load up anything.
Anti-slip rubber feet help to hold your ramp in place while loading up your toys.
MAXIMUM CAPACITY MEETS YOUR NEEDS: Each set of truck ramp kits has a maximum load capacity of 700 lbs. (....

Check Stock

BISupply Aluminum Ramp Kit – 12in Truck Ramp Brackets and Rubber Feet, Tailgate Ramp Kit Ramp Plate Kit

BUILD YOUR OWN RAMPS: Use the BISupply Aluminum Truck Ramps Loading Ramp Kit to turn simple 2 by 12-inch (5.1 by 30.5 cm) boards into sturdy, all-purpose utility trailer ramps.
Each package of ramp parts includes 2 aluminum loading ramps, 2 rubber anti-slip loading ramp ends, and installation hardware to assist in constructing a total of (2) ramps.
2-inch by 12-inch ramp boards required (not included).
Kit weighs just under 9 pounds for easy storage, installation, and handling.
DURABLE ALUMINUM RAMP PLATES: Constructed of quality aluminum material ensures that these load ramps are designed for maximum strength and durability.
Loading ramp brackets provide reliable stability and resistance to rust and corrosion.
Features a 1.37-inch (3.5 cm) board insert space, non-skid threads on the 5.4 by 11-inch (13.7 by 27.9 cm) faceplate, and pre-screwed bolt holes.
ANTI-SLIP FEET: Forget about cutting angles to make your ramps sit flat, simply slide one of these 4 by 11-inch (10.2 by 27.9 cm) rubber ramp ends for boards on the end of the board and you are ready to load up anything.
Anti-slip rubber feet help to hold your ramp in place while loading up your toys.
MAXIMUM CAPACITY MEETS YOUR NEEDS: Each set of truck ramp kits has a maximum load capacity of 700 lbs. ....

Check Stock