Top Aluminum Router Reviews

Bosch RA1171/RA1181 Feather Board # 2610927685

  • Support: The tall aluminum fence measuring 4 7/8 inch x 25 1/8 inch can handle tall stock with ease.
  • The fence is complete with adjustable MDF face plates for smoother operation with taller work pieces and out feed can be offset for jointing.
  • Precision: The Bosch RA1171 features a rigid aluminum router mounting plate that stays flat and precise for accuracy.
  • For added versatility, it’s pre drilled to fit a variety of routers.
  • Easy to use: Two easy to use feather boards attach to fence and router table, providing additional guidance and protection against kickback.
  • They’re fully adjustable to fit a variety of work pieces.
  • Accessory slot accepts additional feather boards and 3/4 inch optional accessories such as miter gauge.
  • Cleanup: With a cabinet style design, the RA1171 is able to feature two dust collection ports for removing any job site dust and debris.
  • The dust collections ports fit standard 2 1/2 inch vacuum hoses.
  • Convenience: Featuring a dual outlet switch with 6 feet power cord.
  • Includes bench top router table, aluminum router mounting plate, 3x mounting plate rings, mounting hardware, 2x adjustable feather boards, adjustable clear guard, starter pin and guard, and 2x out feed fence shims.
Check Stock

Bosch 1617EVSPK Wood Router Tool Combo Kit - 2.25 Horsepower Plunge Router & Fixed Base Router Kit with a Variable Speed 12 Amp Motor and RA1181 Benchtop Router Table

  • Bundle contains Bosch RA1181 Benchtop Router Table and 1617EVSPK 12 Amp 2-1/4-Horsepower Plunge and Fixed Base Variable Speed Router.
  • Bentop includes 2 adjustable featherboards, dust collection port, dual outlet switch and 6-foot power cord.
  • Aluminum fence with MDF face plates and aluminum router mounting plate.
  • Electronic variable speed plunge and fixed base router kit.
  • soft start, micro-fine depth adjustments.
Check Stock

Bosch Cabinet Style Router Table RA1171 , Blue

  • Support: The tall aluminum fence measuring 4 7/8 inch x 25 1/8 inch can handle tall stock with ease.
  • The fence is complete with adjustable MDF face plates for smoother operation with taller work pieces and out feed can be offset for jointing.
  • Precision: The Bosch RA1171 features a rigid aluminum router mounting plate that stays flat and precise for accuracy.
  • For added versatility, it’s pre drilled to fit a variety of routers.
  • Easy to use: Two easy to use feather boards attach to fence and router table, providing additional guidance and protection against kickback.
  • They’re fully adjustable to fit a variety of work pieces.
  • Accessory slot accepts additional feather boards and 3/4 inch optional accessories such as miter gauge.
  • Cleanup: With a cabinet style design, the RA1171 is able to feature two dust collection ports for removing any job site dust and debris.
  • The dust collections ports fit standard 2 1/2 inch vacuum hoses.
  • Convenience: Featuring a dual outlet switch with 6 feet power cord.
  • Includes bench top router table, aluminum router mounting plate, 3x mounting plate rings, mounting hardware, 2x adjustable feather boards, adjustable clear guard, starter pin and guard, and 2x out feed fence shims.
Check Stock

O SKOOL Precision Aluminum Router Table Insert Plate Router Templates With Pre-Drilled Adapt to Multiple Routers of Different Models

  • [Contents]: Package includes (1) router plate, (1) start pin, (5) insert ring, (1) 3mm Allen wrench hex key, (1) 4mm Allen wrench hex key, (4) hex....
  • [Adjust Balance]: Leveling screws can be adjusted the top and bottom flatness of the router plate and router table. The screws of oval mounting holes....
  • [Pre-drilled]: This aluminum router plate come with pre-drilled to fit multiple models of routers..
  • [Simple to Use]: The plate is equipped 5 versions of insert rings that allow you to easily change the size of the opening around the router bit. The....
  • [High Durability]: The dimensions of the plate is 9-1/4" x 11-3/4" x 3/8", and the plate is made of high-quality aluminum alloy, with good wear....
Check Stock

Woodhaven 3000 27 Planing Sled

  • Our Planing Sled is an affordable solution for surfacing or milling live edge slabs, wide stock, butcher blocks or workbenches, removing a finish from....
  • 27" wide maximum capacity, 36" Ultra Track rails & 16" Double Track rails.
  • 3" tall Ultra Track aluminum rails support the router and won't deflect as you move the router back and forth over the stock. Router glides between....
  • Includes a NoDrill Plate with a quick attach feature so your router can be quickly attached or removed. Works with any router bit you supply that has....
  • Lifetime guarantee against defects in material or workmanship. Made in the USA!.
Check Stock

JessEm Rout-R-Table Stand Bundle with JessEm Phenolic Mast-R-Top 24 x 32-Inch Router Table Top, Mast-R-Fence II Router Table Fence and JessEm Rout-R-Lift II Router Lift (4 Items)

  • Bundle Includes: JessEm Rout-R-Table Stand, JessEm Phenolic Mast-R-Top 24 x 32-Inch Router Table Top, JessEm Mast-R-Fence II Router Table Fence, JessEm Rout-R-Lift II Router Lift for Porter Cable, Dewalt and Bosch Routers with 3.5-Inch Diameter Motors.
  • Aluminum Dual Track: The JessEm Mast-R-Top comes with an extruded anodized aluminum dual track with a T-slot that accepts standard 1/4-inch hex head bolts or hex nuts and a standard 3/4-inch miter slot.
  • Router Table System: The table top comes pre-machined to fit JessEm’s Mast-R-Lift, Rout-R-Lift II, and Rout-R-Plate lift and router plates for building a router table system.
  • Premium Material: Made from laminated phenolic, which is one of the strongest, stable, and durable materials available for an industrial strength work surface.
  • Compatibility: The Table Top features a centered router opening measuring 9-1/4 x 11-3/4 inches that accepts most standard router plates and lifts (3/8-inch thick).
Check Stock

O'skool Router Lift Systems for 3-1/2' Diameter Motors, 9-1/4'' x 11-3/4'' Plate

  • Applicable Models : . Aluminum Router Plate Dimensions are 11-3/4" X 9-1/4" X 3/8"thick, 19.1(3/4”) Radius. Designed for routers with 3-1⁄2-in.-dia of body.(Please check the size of our Router Lift to make sure if it matches your router motor and router table .).
  • Suitable for a Variety of Router Tables: Use bar to adjust the gap between router table and router table top opening. Leveling screws can be adjusted the top and bottom flatness of the router plate and router table. The screws of oval mounting holes can be adjusted to suitable positions according to the locations of the router table style holes, then lock them in place..
  • Quick-cChange Router Bit : Use the router lift’s included crank handle to adjust the height of the router bit easily and precisely from above the table..
  • Rotate the hex hole of the micro-adjustment dial to lift or lower the carriage as needed to position the router bit, every full revolution of the adjusting crank moves the carriag and changes the height of the router bit by +- 1/20,” which is the distance change of a thread. So you can make exact bit height changes..
  • After adjusting the router lift to the needed height, lock the carriage to preventthe router motor from shifting while in use.There are precise centerlines....
Check Stock

Woodhaven 3004 51\ Planing Sled

  • Our Planing Sled is an affordable solution for surfacing or milling live edge slabs, wide stock, butcher blocks or workbenches, removing a finish from a surface and other jobs impossible for a planer. Router & Bit NOT included..
  • 51" wide maximum capacity, 60" Ultra Track rails & 32" Double Track rails.
  • 3" tall Ultra Track aluminum rails support the router and won't deflect as you move the router back and forth over the stock. Router glides between the Ultra Track rails for front-to-back movement. You supply two wood rails, 12" to 16" longer than the work. No limit to the length of the work. Double Tracks glide on top of the wood rails and guide the router/Ultra Tracks from side-to-side..
  • Includes a NoDrill Plate with a quick attach feature so your router can be quickly attached or removed. Works with any router bit you supply that has an overall length of at least 2-1/2" and a maximum diameter of 2-1/2". Our optional 13600 upshear router bit leaves a great surface finish, has a 1-1/2" cutting diameter, a 5/8" cutting length, a 2-1/2" overall length and a 1/2" shank. Router not included..
  • Lifetime guarantee against defects in material or workmanship. Made in the USA!.
Check Stock

QYQRQF Router Plate, Aluminum Router Table Plate for Woodworking Router Table Insert Plate for Trim Routers Wood Trimming Milling Tools with Accessories (Red）

  • Material: The router table insert plate is made of heavy duty aluminum, which could be used for years without rust or deformation..
  • Thoughtful Design: The table top mounting plate is designed with inches and centimeter two measurements fit for trim routers. What’s more, the router plate is made with adjustable holes, which could fit for different brands routers. You could also drill holes as needed..
  • A Set of Tools: The insert table plate is coming with 4 different router insert rings and screws, it could satisfy different needs and woodworking..
  • Multi-function: No maters you are a woodworker or a DIY fan for small projects, the aluminum router table insert plate could be a good helper for your woodworking..
  • Important: Please do pay attention to the size of the router in the detail product picture, to make sure the insert plate could fit for your routers. Any question on product, we could help to solve within 24 hours..
Check Stock

O'SKOOL Router Lift Systems for 3-1/2" Diameter Motors, 9-1/4'' x 11-3/4'' Plate 5-Piece Insert Ring Kit

  • Applicable Models : . Aluminum Router Plate Dimensions are 11-3/4" X 9-1/4" X 3/8"thick, 19.1(3/4”) Radius. Designed for routers with 3-1⁄2-in.-dia of body.(Please check the size of our Router Lift to make sure if it matches your router motor and router table .).
  • Suitable for a Variety of Router Tables: Use Cam wheels to adjust the gap between router table and router table top opening. Leveling screws can be adjusted the top and bottom flatness of the router plate and router table. The screws of oval mounting holes can be adjusted to suitable positions according to the locations of the router table style holes, then lock them in place..
  • Quick-cChange Router Bit : Use the router lift’s included crank handle to adjust the height of the router bit easily and precisely from above the table..
  • Rotate the hex hole of the micro-adjustment dial to lift or lower the carriage as needed to position the router bit, every full revolution of the adjusting crank moves the carriag and changes the height of the router bit by +- 0.05,” which is the distance change of a thread. So you can make exact bit height changes..
  • After adjusting the router lift to the needed height, lock the carriage to preventthe router motor from shifting while in use.There are precise cent....
Check Stock

JET XACTA-Lift with Deluxe Fence (708124)

  • PRECISION ADJUSTMENT HANDLE: Provides up to 2-1/2" of bit depth adjustment.
  • easily removed for a flush routing surface.
  • 11-3/4" X 14-3/4" X 1/4" HEAVY-DUTY ANODIZED ALUMINUM PLATE: Prevents sagging, and lasts longer than plastic router inserts..
  • TWO 3/4" SOLID STEEL SHAFTS: Add rigidity to router bit cutting at desired depth.
  • all moving parts ride on bronze bearing surfaces..
  • ADJUSTABLE SAFETY GUARD: Positions directly above the router bit for safety when in use..
  • 3-5/8" TABLE OPENING: Accommodates larger router bits..
Check Stock

Rockler Pro Lift Router Lift - 9-1/4 x 11-3/4 Large Router Plate – Router Lift Kit For Kreg Jessum Woodpecker & Peachtree - Router Lift Systems w/Router Plate Insert Ring & Set of Hex Keys

  • Router Table Lift: Raise your woodworking to a new level with this pro lift router tool. Our Rockler router lift 9.25” x 11.75” plate is ideal for....
  • Adjust The Height: Use the fine adjustment gear to set the final height to within 0.001''. All this is achieved more quickly, more efficiently, and....
  • Fits Most Routers: This woodworking router table works with router motors with a 4.2'' diameter (13.85'' circumference), like the Porter-Cable 7518....
  • Easy Router Bit Changes: Raise your router table fast with the Quick-Gear, then down-shift to the precision gear for fine adjustments—Snap-Lock....
  • What’s Included? Our pro lift includes (1) Rockler Pro Lift Router Lift, (1) Aluminum router plate (3/8'' thick), (1) Router Ring (1-1/2'' I.D.),....
Check Stock

QYQRQF Router Plate Aluminum Router Table Plate for Woodworking Router Table Insert Plate for Trim Routers Wood Trimming Milling Tools with Accessories Black）

  • Material: The router table insert plate is made of heavy duty aluminum, which could be used for years without rust or deformation..
  • Thoughtful Design: The table top mounting plate is designed with inches and centimeter two measurements fit for trim routers. What’s more, the....
  • A Set of Tools: The insert table plate is coming with 4 different router insert rings and screws, it could satisfy different needs and woodworking..
  • Multi-function: No maters you are a woodworker or a DIY fan for small projects, the aluminum router table insert plate could be a good helper for your....
  • Important: Please do pay attention to the size of the router in the detail product picture, to make sure the insert plate could fit for your routers.....
Check Stock